Stockholm Makerspace Wiki - Användarbidrag [sv]

Trärummet

2020-05-29T11:20:32Z

2020 to-do list for maintenance and upgrades

*Table saw
**<s>Blade height adjustment not working. Screw and gear are worn out.</s>
***<s>Order D-71 wormwheel D-56 height adjustment rod</s>
***<s>Install new parts, check for loose screws and friction in the machanism</s>
***<s>follow this forum for more info https://www.woodworkforums.com/f153/bought-mj2325b-2nd-hand-help-76708/2</s>
**Make zero-clearance inserts (create .dxf for the lasercutter)
**<s>Adjust the table top (currently not perfectly flat)</s>
**<s>tighten the screws of the fence, check for squareness and adjust the distance mark</s>
**<s>General cleaning</s> 

*Table router
**Cut and install new top board made of phenolic coated plywood
**Add height adjustment screws to the router board
**<s>Finish the router fence</s>
**Fix the spindle locking pin
**<s>Check the height adjustment mechanism. Bits move down slightly when used.</s> 

*Band saw
**Order and install new tires on the wheels - on their way
**Install brushes to clean the wheels
**Balancing of the wheels to reduce vibrations
**<s>Replace the small dust collector hole for a large one to connect to the HF vacuum.</s>
**Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs) 

*Drill press
**Fix it with a chain to the ceiling/bold it to the ground
**Add a bolt to the top gear cover
**3D print [https://www.thingiverse.com/thing:3283800 dust collection segmented hose] (or buy one in bauhaus) 

*Lathe
**Clean and grease the speed vario - 6260 bearings on their way for reassembly
**order/get the new retaining bolt for the chuck (M12 - 320-330 mm)
**make supports for the new tools on the french cleats
**connect the lights/ or replace it with some LED strips on the dust collection 

*Planer/jointer
**<s>Replace and</s> <s>adjust the blades</s> + fix the broken bolt (we have new bolts, to be replace next time we change the blades)
**Build a side fence
**<s>Build/buy a dust collector</s>
**built a platform above the planer storage corner to protect it from tools, etc.

 

*Miter saw station + storage
**<s>Building a new bench that include a box around the miter saw for dust collection and storage under and above it for scrap and temporary storage</s>

 

*Dust collection system
**<s>Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit</s>
***<s>1m flexible hose to connect to the miter dust collection box</s>
**Flexible hose to connect to band saw or lathe (1.5-2m)
**Dust collection pipe behind the drill press with double door for drill press and belt sander

Plan- och rikthyvel, Scheppach HMC 3200

2020-05-19T18:30:14Z

{| style="clear: right; float: right; width: 20em; padding: 0.3em; margin: 0.5em 0 0.5em 1em; border: 1px solid #A3B1BF; background: #f5faff; text-align: left; font-size: 100%; line-height: 1.5em;"
|-
| align="center" |'''Snabbfakta Scheppach EMC 3200'''
|-
|[[Fil:Scheppach_hmc_3200.jpg|200px|center]]
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Modell:''' ''Scheppach HMC 3200''
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Bokningsbar:''' Nej
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Kostnad att använda:''' Gratis
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Max board width:''' 32 cm
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Max board height:''' 18 cm
|-

|} 

==Generell information==
 
==Säkerhetsinformation==

*Wear safety glasses, keep hands at least 15 cm from the cutterhead
*Make adjustments with the machine powered off
*Check planer table before turning it on, a tool might have slipped under the cutter head
*Stock must be at least 30 cm long. Minimum 6 mm thick for jointer, 4 mm for planning
*Blades must be sharp. Dull blades will vibrate the stock and may cause a kickback.
*Clean tool and work area when done
*Feed the work so that the knives will cut “with the grain”. Use only stock that is free of knots and splits. Do not plane end grain
*Use a push block when planing a flat surface. Never apply pressure directly over the knives with your hand.
*Do not plane the maximum amount off of stock when planing. Two passes through the planer can be better than one.
*When planning thin pieces of wood, be sure to stand to one side in case the wood breaks and kicks back.
*Support the work properly at the in feed and at the out feed.

==Handhavande av maskinen==
===Manual===

Sprängskiss: [[:Fil:Scheppach hmc 3200 planing combi.pdf]]

===Material===
Endast för trä! Do to use wet or green wood. Wait 24 hours before planing glued wood pieces or pieces with epoxy.

Use only clean (without nails, screws or sand particles) wood. No other material allowed.
===Användarinstruktioner===
Se till att koppla in dammsugare innan du använder den!

'''''Skriv något om hur man ställer de olika vinklarna'''''

==Förbrukningsmaterial==
We currently have 3 sets of blades. Label and store the dull blades. When two sets are dull, send them to resharpening.

==Underhåll och reservdelar==

===Underhåll===

*Daily
**Visual check whether unit or parts are damaged
**Check whether power cable is damaged
**Check if there is any parts loose around the blades before plugging and running it.

*Monthly
**Check the blade sharpness. Change blade if necessary.
*Annually
**Remove the front cover to clean and grease the transmission chain and clean the clutch plates

===Reservdelar===
We do not have spare parts for this machine.

#

==Logg==

*2020-03-19: Fence installed
*2020-01-XX: dust collector built for the planer
*20XX: Inköpt

*

==Länkar==

[https://www.youtube.com/watch?v=YbvPVz9NDxk Wood Jointer Tips for Setting Up and Using a Jointer - WoodWorkWeb]

==Ägare==
Maskinen inköpt av Makerspace

==Gallery==

Table router, Triton TRA001

2020-04-20T05:20:46Z

{| style="clear: right; float: right; width: 20em; padding: 0.3em; margin: 0.5em 0 0.5em 1em; border: 1px solid #A3B1BF; background: #f5faff; text-align: left; font-size: 100%; line-height: 1.5em;"
|-
| align="center" |'''Snabbfakta Triton TRA001'''
|-
|[[Fil:Router Triton TRA001.jpg|centrerad|ramlös|228x228px]]
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Modell:''' Triton TRA001
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Bokningsbar:''' Nej
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Kostnad att använda:''' Gratis
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Power:''' 2400W
|-

|}
==Generell information==
==Säkerhetsinformation==

==Handhavande av maskinen==
===Manual===
[http://www.tritontools.com/en-GB/Product/Power%20Tools/Routers/TRA001 Description on the Triton website].

===Material===
For wood and some plastics only.

Do not ever use metal, even as a template.

===Usage instructions===
Make sure to attach the dust extraction system before using the router.

You can raise or lower the bit using a crank usually found in the storage below the table. It fits in a hole in the table, and reaches to a ball head with a nail through it on the router.

[[Fil:Router crank.jpg|ramlös|133x133px]]

===Replacing the bit===
[[Fil:Router-wrench.jpg|alt=|höger|ramlös]]
First, flip the switch off. Even with the machine unplugged, it’s necessary to disengage a safety mechanism. You need to push the power switch cover fully open, flip the switch and let the cover close completely.

Then, remove the red protective plate, unlocking it with the grey plastic tool.

Then, using the crank, raise the bit to its highest position. Turning the chuck, you should hear a click when the spindle lock engages.

Once in this position, unlock the bit using the black flat wrench. If the new bit has a shank of a different size, unscrew the chuck completely and replace it with one the proper size.

Place the new bit, tighten it with the wrench, lower it, and place back the red protective plate (using the smallest hole that would fit over the bit).

Put away the tools, flip the switch back on, and you’re good to go!

==Förbrukningsmaterial==
==Underhåll och reservdelar==

===Underhåll===

*Daily

*Monthly

===Reservdelar===
We do not have spare parts for this machine.

#

==Logg==

*

==Länkar==
==Ägare==
Maskinen inköpt av Makerspace

==Gallery==

Table router, Triton TRA001

2020-04-19T16:05:47Z

X: Added images

{| style="clear: right; float: right; width: 20em; padding: 0.3em; margin: 0.5em 0 0.5em 1em; border: 1px solid #A3B1BF; background: #f5faff; text-align: left; font-size: 100%; line-height: 1.5em;"
|-
| align="center" |'''Snabbfakta Triton TRA001'''
|-
|[[Fil:Router Triton TRA001.jpg|centrerad|ramlös|228x228px]]
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Modell:''' Triton TRA001
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Bokningsbar:''' Nej
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Kostnad att använda:''' Gratis
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Power:''' 2400W
|-

|}
==Generell information==
==Säkerhetsinformation==

==Handhavande av maskinen==
===Manual===
[http://www.tritontools.com/en-GB/Product/Power%20Tools/Routers/TRA001 Description on the Triton website].

===Material===
For wood and some plastics only.

Do not ever use metal, even as a template.

===Usage instructions===
Make sure to attach the dust extraction system before using the router.

You can raise or lower the bit using a crank usually found in the storage below the table. It fits in a hole in the table, and reaches to a ball head with a nail through it on the router.

[[Fil:Router crank.jpg|ramlös|133x133px]]

===Replacing the bit===
[[Fil:Router-wrench.jpg|ramlös]]

First, flip the switch off. Even with the machine unplugged, it’s necessary to disengage a safety mechanism. You need to push the power switch cover fully open, flip the switch and let the cover close completely.

Then, remove the red protective plate, unlocking it with the grey plastic tool.

[[Fil:Router tool.jpg|ramlös|200x200px]]

Then, using the crank, raise the bit to its highest position. Turning the chuck, you should hear a click when the spindle lock engages.

Once in this position, unlock the bit using the black flat wrench. If the new bit has a shank of a different size, unscrew the chuck completely and replace it with one the proper size.

Place the new bit, tighten it with the wrench, lower it, and place back the red protective plate (using the smallest hole that would fit over the bit).

Put away the tools, flip the switch back on, and you’re good to go!

==Förbrukningsmaterial==
==Underhåll och reservdelar==

===Underhåll===

*Daily

*Monthly

===Reservdelar===
We do not have spare parts for this machine.

#

==Logg==

*

==Länkar==
==Ägare==
Maskinen inköpt av Makerspace

==Gallery==

Fil:Router-wrench.jpg

2020-04-19T15:59:02Z

All the tools required to replace the table router bit

Fil:Router tool.jpg

2020-04-19T15:57:56Z

The tool to remove the protective plate of the table router

Fil:Router crank.jpg

2020-04-19T15:54:51Z

The crank to adjust the height of the table router bit

Fil:Router Triton TRA001.jpg

2020-04-19T15:50:18Z

Router Triton TRA001 in its enclosure

Maskiner och inventarier

2020-04-19T15:48:55Z

X: Update link to the table router

''Denna sida innehåller en lista på en stor del av de maskiner och verktyg som Stockholm Makerspace förfogar över, sorterat efter vilket rum den finns i.''

==Stora rummet==
[[Fil:Stort arbetsbord 2D-3D.jpeg|miniatyr|Stort arbetsbord]]
[[Fil:rum_3dprinting.jpg|200px|thumb|right|3D-skrivare, storformatsskrivare och skärmaskiner i sitt tidigare rum, nu flyttade till Stora rummet.]]

===Arbetsbord===

*[[Stort arbetsbord 2D/3D|Stort arbetsbord]] i 2D/3D sektionen

===3D-Print===

*[[Ultimaker 2]]+ #1
*[[Ultimaker 2]]+ #2
*[[Ultimaker Original+ Extended]] - Vår egen höjda UMO+
*[[Anycubic Photon]]
**[[Härdningskammare]]
**[[Rengöringsbad för SLA-print]]
*[[3Doodler original]] 3D-skrivarpenna

===Ettikettskrivare===

*[[Zebra TLP 2824Plus]]
*[[Dymo Präglingsapparat]]

===Skärplotter===

*[[Vinylskärare Roland GX-24]]
*[[Skärmaskin Silhouette Cameo]]

===Pappersskrivare===

*Storformatsskrivare [[HP Designjet 800]]

===Förbrukningsmaterial till salu===

*Se [[Förbrukningsmaterial#Folier och tunna plaster|Förbrukningsmaterial]]

===IT-Resurser===
====Laptops====

*[[Lenovo Thinkpad]]

====Arbetsstationer====

*[[CAD-Station 1 & 2, Z800]]

====Mjukvara====

*[[VCarve Pro Makerspace edition]]

====2D-Print (vanlig pappers-skrivare)====

*[[HP PageWide Pro MFP 477dw]]

===Laserskärare===

*[[Redsail Laser|Redsail Laser 100W]]
*[[Lasereffektmätare 200W]]

===Fotoutrustning===

*[[Fotobås]]
*[[FastFoto FF-680W Photo Scanner]]
*[[Osmo Action|Osmo Action kamera med tillbehör]]

===Pappersutrustning (bl.a. skåpet under fotobåset vid laserskäraren)===

*[[Skärmaskiner, Dahle]] [[Skärmaskin Dahle A3|Skärmaskin Dahle A3 TODO]]
*[[Spiralbindare]]
*[[Rullskärmaskin Hama ProCut 460]]
*Lamineringsmaskin A4

===Försäljning av förbrukningsmaterial och verktyg===

*Lagerhylla plywood, mdf, fräs och svarv-verktyg, stämpelgummi, etsbara skivor

===Elektronikhörnan===
[[Fil:rum_elektronik.jpg|200px|thumb|right]]
[[Dokumentation av labbelektronik]]
====Lödning====

*[[Lödstation Weller WS81 DE]] (PU81) 2 st
*[[Varmluftslödstation TENMA]]

*[[Reflowugn T962A]]

*[[Lödstationslådan (för workshops och event)]]
*[[SOLDER PEAK SP-1010DR avlödningsstation|Avlödningsstation SOLDER PEAK SP-1010DR]]
*[[Lödröksug]]
*[[Förlödning lödning Tenma]]
*[[Kretskortshållare]]
*[[Tillbehör och förbrukning för lödning]]
*[[Lödgryta]]
*[[Lödsstation Weller WTCP-S]]

====Mätutrustning====

*[[Bänkmultimeter Fluke 8842A]]
*[[Multimeter UT 139A]]

====Oscilloskop====

*[[Tektronix 2465BCT oscilloskop]]
*[[Rigol Oscilloskop]] DS1054Z, 2 st
*[[Oscilloskop Fluke PM3380B]]

====Frekvensgeneratorer====

*[[Funktionsgenerator GW GFG-813]]

*

====Nätaggregat====

*[[HP 6622A strömförsörjning]]
*[[Labbaggregat HP 6516A 3KV 6MA]]
*[[Peaktech 6210]]
*[[Peaktech 6225]]
*[[Labbaggregat Peakpower 1503SB]]
*[[Isolationstransformator hembyggd]]
*[[Safe 11000 - 1000VA - Isolationstransformator]]

====Batteriladdare====

*[[LiPo batteriladdare|LiPo (Litium Polymer) batteriladdare]]
*[[Batteriladdare Warta]]

====Elektronikkomponenter====

*[[Elektronikkomponenter]]

====Övrigt====

*[[Punktsvets kWeld]] för batteripack
*[[Stereomikroskåp AmScope]]
*[[Arduino och tillbehör]]
*[[Nätverksswitch D-link DES-1016D]]
*[[Techcon TS9150E Lödpasta/Limdispenser]]
*[[Utvecklingskort mm]]
*[[Böcker i Elektronikhörnan]]
*[[Popmaskiner#Elektronikh.C3.B6rnan|Popmaskin]]

===Övrigt===

*[[Sladdvindor 230V takmonterade|Sladdvindor]]
*[[Grenuttag]]
*[[Första hjälpen tavla]]
*[[Dammsugare i workshoprummet|Dammsugare]]
*[[Overhead plast film]]

*[[Värmeförseglingsmaskin]]
*[[Limpistoler]]
*[[Varmluftspistol i workshoprummet|Varmluftspistol]]
*[[Laddstation]]

*

==Textilrummet==
[[Fil:rum_textil.jpg|200px|thumb|right]]
[[Fil:Provdockor.jpg|200px|thumb|right]]
===Sy===

*[[Singer 29K4 skomakar/lädersymaskin]]
*[[Husqvarna Emerald 118]]
*[[Industrisymaskin Dürkopp 212]]
*[[Husqvarna Huskylock s21|Overlocksymaskin Husqvarna Huskylock s21]]
*[[Minisymaskin Singer]]

===Skära===

*[[Värmekniv Heatcut]]
*[[Rullskärare Dahle 448]]

===Sticka===

*[[Elektronisk Stickmaskin Silver Reed SK 840]]

===Transfertryck===

*[[Transferpress Transmatic TS 5PA]]
*[[Transferpress Insta 414]]

===Brodera===

*[[Brother PR-650|Brodyrmaskin Brother PR-650]]

===Övrigt===

*Strykjärn
*Strykbräda
*Provdockor
*[[Knyppeldyna]]
*[[Öljettpress]]
*[[Hutschar i syrummet|Hutschar]] med tillbehör, [[Hutschar i syrummet|textilsaxar]], mindre verktyg och förbrukningsmaterial
*[[Lådor i textilrummet|Lådor]] med bl.a förbrukningsmaterial och tillbehör
*[[Sytrådstavla]]
*[[Förvaringsskåp i textilrummet|Förvaringsskåp]] med tyger
*[[Böcker i textilrummet]]
*[[Ljusbord]]
*[[Plåsterstation i Textilrummet|Plåsterstation]] - Första hjälpen i Textilrummet
*[[Popmaskiner#Textilrummet|Popmaskin]]

==Blästerrummet==

*[[Blästerskåp]]
*Filter

==Kemförvaring==

*Brandskåp

==Våtrummet==
[[Fil:rum_vat.jpg|200px|thumb|right]]

===Screentryck===

*[[Screentrycksbord]] demonterat
*[[UV-Låda för Screentrycksramar]] (halvtrasig)

===Målning===

*[[Sprayskåp]]
*[[Airbrush]]
*[[Färgsprutor]]
*[[Pulverlackering]]

===Kretskort===

*[[UV-Låda för Kretskort]]
*[[Etstank]]
*[[Kretskortsborrmaskin]] i elhörnan

===Tryck och Vakum===

*[[Vakuumpump 130W]]
*[[Vakumkammare]]
*[[Tryckfat]]

===Upphettning===

*[[Konvektionsugn]] 320 grader

===Rengöring===

*[[Dammsugare i våtrummet|Dammsugare]]
*[[Ultraljudstvätt]]

===Övrigt===

*[[Mörkrumspåse]]

==Workshoprummet==
[[Fil:workshoprummet_arbetsbord.jpg|thumb|200px|right]]

*Generell information om att hålla [[Workshops]]
*[[Projektor DLP Benq]]

===Möbler===

*40+ [[stolar]]
*15 [[bord 140x60]] cm
*2 st [[Whiteboard 3 meter|Whiteboard]] tavlor 3 m långa
*[[Diskbänk]]
*[[Mindre lagerbokhylla i workshoprummet|Bokhylla med kontorsmaterial]]
*Lagerhylla med material till försäljning, bl.a. plywood och MDF skivor

*
*

==Metallrummet==
[[Fil:metallrummet.jpg|200px|thumb|right]]
[[Metallrummet|Info om metallrummet (Komma igång, mm)]]

===Manuella maskiner===

*Metallsvarv [[EMCO Maximat 11]]
*[[ZX45|Metallfräs ZX45]]
*[[Bänkplåtsax]]
*[[Polermaskin|Polermaskin]]
*[[Bänkslip|Bänkslip (Metabo)]]
*[[Bänkslip (Galvanotechnik)]]
*[[Makita LC1230 Metallkapsåg]]
*[[Våtslip ( Scheppach )|Våtslip (Scheppach)]]
*Pelarborr Arboga E100
*Dammsugare för metallspån
*Hydrualpress 20 ton
*Metallbockare
*Arbetsbänk 308 cm

===CNC-Maskiner===

*[[Terco CNC45 CNC-fräs]]
*[[CNC Portalfräs]]
*[[Emco Compact 5 CNC|Emco Compact 5 CNC svarv]]
*Borrset Snabbstål 1-10mm
*Borrset Snabbstål 1,5 - 12,5 mm
*Dornpress Astor
*Bänkskruvstycke 150 mm
*Planskiva (Mätskiva) 100x63 cm
*Parallellbitar
*Sladdborrmaskin Makita DP4700
*Gängsats
*Tryckluftsverktyg (Nibbler, mutterdragare, vinkelmutterdragare, luftpåfyllare)
*Vinkelkap / vinkelslip 255 mm
*

==[[Finsmideshörnan]]==
[[Fil:Smideshorn.jpg|100px|thumb|right]]

*Betbad
*Gasolbrännare
*[[Polertrumlare]]

==Svetsrummet==
[[Fil:Svetsrummet.jpg|200px|thumb|right]]
[[Svetsrummet|Info om svetsrummet och hur man svetsar.]]

*[[Jordanslutningar]]

===Svetsar===

*[[Kemppi Kempomat 2100 MIG/MAG-Svets]]
*[[Kemppi MasterTig 2500W TIG-Svets]]

===Plasmaskärare===

*[[Hypertherm Powermax30 Air Plasmaskärare]]

===Gasflaskor===

*[[Skyddsgas]]

===Övriga Verktyg===

*[[Skärgaller / Offergaller]]
*Metallbandslip JSG 100, 100 mm x1220 mm band

==Trärummet==
[[Fil:trarummet.jpg|thumb|200px|right]][[Trärummet|Info om trärummet (Komma igång, mm)]]

[[Wall of shame]]
[[Fil:Tra_bits.jpg|thumb|200px|right]] [[Fil:Tra_tejp.jpg|thumb|200px|right]]

===Bänkfast===

*
*[[Pelarborr, Arboga]]
*[[Bandsåg, EJCA BA45]]
*[[Bordssåg, Meec MJ2325B]]
*[[Bosch GCM8 SJL|Kap- och gersåg Bosch GCM8 SJL]]
*[[Plan- och rikthyvel, Scheppach EMC 3200]]
*[[Table router, Triton TRA001]]
*[[Spånsug, Felder RL 125|Spånsug, Felder RL 125]]
*[[Träsvarv, Solberga SVT 600]]
*Fräsbord från Jula
*Hyvelbänk
*Kontursåg, Meec tools

===Elhandverktyg===

*Festool handöverfräs
*Cirkelsåg (Biltema)
*Sticksågar (en Blå Bosch, en Kinamaskin)
*Skruvdragare 2st Bosch 10,8V + ett par Kinamaskiner

===Handverktyg===

*Hyvlar
*Stämjärn

===Annat===

*Bits
*Tejp ställ

==Biolabbet==
[[Fil:rum_biolabbet.jpg|200px|thumb|right]]

==Tryckluft==

*[[Tryckluftsnätet]]
*[[Kompressor Mattei ERC507L]]
*[[Kompressor OM 200-24]]

==Långtids-Projekt-maskiner==

*[[Ultimonster]]

==Övrigt==

*[[Pitney Bowes 5820 brevvåg]]
*Ljudupptagningsutrustning Zoom H1 ljudinspelare samt Rode SmartLav+ mikrofoner (förvaras i styrelseskåpet, kontakta styrelsen på [mailto:info@makerspace.se info@makerspace.se])[[Fil:Zoom H1 Rode SmartLav+ mikrofonset.jpg|miniatyr|centrerad]]

==Ej i lokalen & Tidigare maskiner==

*Träsvarv [[Luna SP1000]] - Såld vintern 2019
*[[Centraldammsugare, Electrolux Volta]] - ej i bruk
*[[Overlocksymaskin Union Special Mark IV]] Såld vintern 2019
*[[Kompressor ljudsvag JWS30]]
*[[Vinylskärare Roland PNC-1000]] - Såld till [http://uppsalamakerspace.se/ Uppsala Makerspace] hösten 2018.
*[[Metallbandsåg MCB128SHD]] - Såld
*[[Färglaser Olivetti MF22]] - Såld pga att den var stor, klumpig och aldrig fungerade...
*[[Harrison TU150 CNC-Svarv]] - På grund av platsbrist vidare utlånad av Erik C till Makerspace Linköping.
*[[EOS EOSINT M250 Xtended]] - Crowdfundad och inköpt, kommer troligtivs aldrig driftsättas.
*[[Plotter HP 7595B]] - Skrotad i samband med flytt till DKV
*[[Kikusui 5650 oscilloskop]] - Såld
*[[Hitachi V-202 oscilloskop]] - Såld
*[[Weller VP 801 EC avlödningsstation]] - Kastad
*[[Tryckluftstork Ultrapac]] - På grund av driftskostnader och hög tryckluftsförbrukning sålde vi denna.
*[[K40-III 40W Chinese Laser Engraver]] - Såld till [http://www.uppsalamakerspace.se/ Uppsala Makerspace] hösten 2017
*[[EMCO Unimat PC CNC-Svarv]] - Erik har tagit hem den (och sedermera sålt den)
*[[K8200]] - Såld Maj 2018
*Pelarborr, Meec - Såld hösten 2017
*[[Bänkborrmaskin|IXON Pelarborr / bänkborrmaskin]] - Tillbakalämnad till utlånande medlem VT2018, i samband med att vår nya Arboga blev klar
*Överhandsfräs Alpha Tools - Brann upp...
*[[Kombinationsslip Parkside]] - Blev överflödig i samband med att vi skaffade väst/östtyska bänksliparna.
*[[Husqvarna symaskin]]
*[[Ultimaker Original|Ultimaker Original]] - Tidigare utlånad av Johan

Table router, Triton TRA001

2020-04-19T15:47:11Z

X: X flyttade sidan Table router, Triton XXX till Table router, Triton TRA001

{| style="clear: right; float: right; width: 20em; padding: 0.3em; margin: 0.5em 0 0.5em 1em; border: 1px solid #A3B1BF; background: #f5faff; text-align: left; font-size: 100%; line-height: 1.5em;"
|-
| align="center" |'''Snabbfakta Triton TRA001'''
|-
|[[Fil:Bosch_GCM8_SJL.jpg|200px|center]]
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Modell:''' Triton TRA001
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Bokningsbar:''' Nej
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Kostnad att använda:''' Gratis
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Märkeffekt:''' 2400W
|-

|} 

==Generell information==
==Säkerhetsinformation==

==Handhavande av maskinen==
===Manual===
===Material===
For wood and some plastics only.

Do not ever use metal, even as a template.

=== Usage instructions ===
Make sure to attach the extraction system before using the router.

You can raise or lower the bit using a crank usually found in the storage below the table. It fits in a hole in the table, and reaches to a ball head with a nail through it on the router.

=== Replacing the bit ===
First, flip the switch off. Even with the machine unplugged, it’s necessary to disengage a safety mechanism. You need to push the power switch cover fully open, flip the switch and let the cover close completely.

Then, remove the red protective plate, unlocking it with the grey plastic tool.

Then, using the crank, raise the bit to its highest position. Turning the chuck, you should hear a click when the spindle lock engages.

Once in this position, unlock the bit using the black flat wrench. If the new bit has a shank of a different size, unscrew the chuck completely and replace it with one the proper size.

Place the new bit, tighten it with the wrench, lower it, and place back the red protective plate (using the smallest hole that would fit over the bit).

Put away the tools, flip the switch back on, and you’re good to go!

==Förbrukningsmaterial==
==Underhåll och reservdelar==

===Underhåll===

*Daily

*Monthly

===Reservdelar===
We do not have spare parts for this machine.

#

==Logg==

*

==Länkar==
==Ägare==
Maskinen inköpt av Makerspace

==Gallery==

Användare:X

2020-04-19T04:59:17Z

X: Skapade sidan med 'I’m a real user.'

I’m a real user.

Table router, Triton TRA001

2020-04-19T04:47:01Z

X: Added instructions on replacing the bit

{| style="clear: right; float: right; width: 20em; padding: 0.3em; margin: 0.5em 0 0.5em 1em; border: 1px solid #A3B1BF; background: #f5faff; text-align: left; font-size: 100%; line-height: 1.5em;"
|-
| align="center" |'''Snabbfakta Triton TRA001'''
|-
|[[Fil:Bosch_GCM8_SJL.jpg|200px|center]]
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Modell:''' Triton TRA001
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Bokningsbar:''' Nej
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Kostnad att använda:''' Gratis
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Märkeffekt:''' 2400W
|-

|} 

==Generell information==
==Säkerhetsinformation==

==Handhavande av maskinen==
===Manual===
===Material===
For wood and some plastics only.

Do not ever use metal, even as a template.

=== Usage instructions ===
Make sure to attach the extraction system before using the router.

You can raise or lower the bit using a crank usually found in the storage below the table. It fits in a hole in the table, and reaches to a ball head with a nail through it on the router.

=== Replacing the bit ===
First, flip the switch off. Even with the machine unplugged, it’s necessary to disengage a safety mechanism. You need to push the power switch cover fully open, flip the switch and let the cover close completely.

Then, remove the red protective plate, unlocking it with the grey plastic tool.

Then, using the crank, raise the bit to its highest position. Turning the chuck, you should hear a click when the spindle lock engages.

Once in this position, unlock the bit using the black flat wrench. If the new bit has a shank of a different size, unscrew the chuck completely and replace it with one the proper size.

Place the new bit, tighten it with the wrench, lower it, and place back the red protective plate (using the smallest hole that would fit over the bit).

Put away the tools, flip the switch back on, and you’re good to go!

==Förbrukningsmaterial==
==Underhåll och reservdelar==

===Underhåll===

*Daily

*Monthly

===Reservdelar===
We do not have spare parts for this machine.

#

==Logg==

*

==Länkar==
==Ägare==
Maskinen inköpt av Makerspace

==Gallery==