Stockholm Makerspace Wiki - Senaste ändringarna [sv]

Canontst

Rasmus Landhall — Thu, 21 May 2026 11:06:55 GMT

Visa ändringar

Canontst 2

Rasmus Landhall — Thu, 21 May 2026 11:06:07 GMT

Visa ändringar

Fil:Shutterspeed video.gif

Rasmus Landhall — Thu, 21 May 2026 10:43:23 GMT

Rasmus Landhall laddade upp Fil:Shutterspeed video.gif c

Ny sida

== Sammanfattning ==
c

Fil:Photoref.jpg

Rasmus Landhall — Thu, 21 May 2026 10:39:44 GMT

Rasmus Landhall laddade upp Fil:Photoref.jpg

Ny sida

Fil:F-stop.gif

Rasmus Landhall — Thu, 21 May 2026 10:39:24 GMT

Rasmus Landhall laddade upp Fil:F-stop.gif aperture

Ny sida

== Sammanfattning ==
aperture

Fil:Shutter-speed comparison.jpg

Rasmus Landhall — Thu, 21 May 2026 10:38:15 GMT

Rasmus Landhall laddade upp Fil:Shutter-speed comparison.jpg By Larissa Scholtis

Ny sida

== Sammanfattning ==
By Larissa Scholtis

Fil:Aperture-comparison.jpeg

Rasmus Landhall — Thu, 21 May 2026 10:32:37 GMT

Rasmus Landhall laddade upp Fil:Aperture-comparison.jpeg explains

Ny sida

== Sammanfattning ==
explains
== Licensiering ==
{{Unknown_copyright}}

Canontst 2

Rasmus Landhall — Thu, 21 May 2026 10:13:02 GMT

← Äldre version		Versionen från 21 maj 2026 kl. 10.13
(3 mellanliggande sidversioner av samma användare visas inte)
Rad 1:		Rad 1:
	a		== 📷 Canon EOS 750D (Rebel T6i / Kiss X8i) ==
			A beginner’s quick-start guide for the Makerspace. ''Less history, more shooting.''

			<div style="overflow:auto; margin:20px 0;">
			{\| style="width:100%; border-spacing:10px;"
			\|- style="vertical-align:top;"
			\| style="width:50%; background:#f8f9fa; padding:20px; border-radius:8px;" \|

			=== ⚙️ The Makerspace Bit: Sensor & Tech ===
			The 750D has an '''APS-C sensor''' (22.3 × 14.9 mm). This is smaller than full-frame, which means:

			* '''1.6× crop factor''' – a 50mm lens looks like an 80mm lens
			* '''24.2 megapixels''' – plenty for large prints or cropping
			* '''ISO 100–12800 (expandable to 25600)''' – usable range for most indoor projects
			* '''1080p video at 30/25/24 fps''' – good enough for documenting builds

			'''Key takeaway for makers:''' The crop factor is your friend for close-up project shots (less working distance needed), but it struggles in very low light unless you add workshop lighting.

			\|\| style="width:50%; background:#f0f4f8; padding:20px; border-radius:8px;" \|

			=== 🎛️ Just Tell Me What to Set ===
			'''Mode dial to “P” if you want point-and-shoot.'''<br/>
			Want a bit more control? Try these:

			* '''Av (Aperture Priority):''' For blurry backgrounds. Set aperture to the lowest number (e.g., f/3.5) and let the camera do the rest.
			* '''Tv (Shutter Priority):''' For freezing motion (machines, people). Set to 1/250 sec or faster.
			* '''ISO:''' Keep on '''Auto ISO'''. The camera is smart enough.
			* '''Focus:''' Set lens to '''AF''' (Autofocus). Use the touchscreen to tap what you want sharp.
			* '''Picture Style:''' Set to '''🖼️ Standard''' or '''🌄 Landscape''' for punchy maker-project photos.

			'''Pro move:''' Flip the screen out and use '''Live View''' (the 📷 button near the viewfinder). Touch the screen to take a photo—like a giant phone.
			\|}
			</div>

			== 📸 The Two GIFs That Explain Everything ==
			''(If you can't see the animations, imagine these static diagrams moving.)''

			{\| style="width:100%; border-spacing:15px;"
			\|- style="vertical-align:top;"
			\| style="width:50%; background:#fff; padding:15px; border:1px solid #ddd; border-radius:8px;" \|
			=== 🔆 Aperture (How blurry your background is) ===
			[[File:Aperture_diagram.gif\|center\|300px\|Aperture blades opening and closing]]<!-- Replace with your actual GIF file name -->
			* '''Small number (f/2.8)''' = Big hole, lots of light, blurry background
			* '''Large number (f/16)''' = Small hole, less light, everything in focus
			On the 750D: Hold the '''Av ± button''' and turn the main dial to change.

			\| style="width:50%; background:#fff; padding:15px; border:1px solid #ddd; border-radius:8px;" \|
			=== 🔭 Focal Length / Field of View (How zoomed-in you are) ===
			[[File:Focal_length_comparison.gif\|center\|300px\|Animation showing same scene from wide-angle to telephoto]]<!-- Replace with your actual GIF file name -->
			* '''18mm''' = Wide. Fits the whole workbench in.
			* '''55mm''' = Zoomed. Just the detail on the PCB.
			* '''250mm''' (if you have the big lens) = Very zoomed. See the engraving on that chip from across the room.
			On the kit lens: Just twist the zoom ring.
			\|}

			== 🏷️ Quick Reference Card ==
			{\| class="wikitable" style="width:100%; text-align:center;"
			\|-
			! style="background:#e9ecef; width:15%;" \| Symbol
			! style="background:#e9ecef; width:25%;" \| Meaning
			! style="background:#e9ecef; width:60%;" \| When to Use It
			\|-
			\| 🔴🕒 '''10"''' \|\| Self-timer \|\| Group photos when you have to run into the shot.
			\|-
			\| ⚡\|\| Flash \|\| Pop it up in dim workshop corners. (Press the flash button on the side.)
			\|-
			\| 🔍 + / − \|\| Exposure Compensation \|\| If the photo looks too dark/bright on the screen, hold this and turn the dial.
			\|-
			\| ◇ \|\| Single AF point \|\| For precise focus on one tiny thing (a screw, an LED).
			\|-
			\| ♻️\|\| Drive mode: Continuous \|\| Hold the shutter down to rattle off 5 photos per second. Perfect for catching action.
			\|-
			\| 🎥 \|\| Movie mode \|\| Turn the power switch past ON to the 🎥 icon. Start/stop with the Live View button.
			\|}

			== 🧼 Makerspace Borrowing Rules ==
			#️⃣ Always return with a charged battery (charger is in the camera case).
			#️⃣ Set lens back to '''AF''' and dial to '''P''' before you put it away.
			#️⃣ If the card is full, don't delete everything—just tell a steward.
			#️⃣ Yes, you can use the Wi‑Fi. Look up “Canon Camera Connect” app. 📱📷

Canontst 2

Rasmus Landhall — Thu, 21 May 2026 09:47:15 GMT

Skapade sidan med 'a'

Ny sida

Canontst

Rasmus Landhall — Thu, 21 May 2026 09:46:47 GMT

← Äldre version		Versionen från 21 maj 2026 kl. 09.46
Rad 1:		Rad 1:
	a		{\| style="width:100%; border-spacing:0; font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;"
			\| style="background: linear-gradient(135deg, #111 0%, #333 100%); padding: 25px; border-radius: 8px 8px 0 0; color: #fff; box-shadow: 0 4px 6px rgba(0,0,0,0.1);" \|
			<span style="font-size: 2.2em; font-weight: 800; letter-spacing: -0.5px; display: block; margin-bottom: 5px;">Canon EOS 750D (Rebel T6i)</span>
			<span style="font-size: 1.1em; color: #aaa; font-weight: 300;">The Makerspace Quick-Start Guide & Cheat Sheet</span>
			\|}

			{\| style="width: 100%; margin-top: 20px; border-collapse: collapse;" valign="top"
			\| style="width: 65%; padding-right: 20px;" valign="top" \|

			== 🚀 The "Just Let Me Shoot" Quick Start ==
			If you don't want a lecture and just need a working photo right now, follow these steps:

			# Power Up: Turn the switch on top to ⟳ '''ON'''. (The step past ON is for Video mode 📹).
			# Go Full Auto: Turn the top mode dial to the green Ⓐ<sup>+</sup> symbol (Scene Intelligent Auto). The camera will handle focus, exposure, and flash for you.
			# Frame & Focus: Look through the viewfinder (or press the 📋 button to use the screen). Lightly press the shutter button '''halfway down''' until it beeps and a green dot lights up. This means it has locked focus.
			# Shoot: Press the button the rest of the way down.

			<div style="background-color: #fff9e6; border-left: 5px solid #f0ad4e; padding: 15px; margin: 20px 0; border-radius: 4px; color: #333;">
			'''💡 Makerspace Rule:''' When you are done, please put the battery back in the charging station, wipe down the lens with microfiber cloth ''only'', and clear your photos from the SD card.
			</div>

			== 🎨 The Esthetician's Guide to Manual Settings ==
			To control the actual look and mood of your shot, flip the mode dial to mathbf{M} (Manual). You need to balance three things (The Exposure Triangle):

			=== 1. Aperture (Depth of Field) ===
			Controls how blurry your background is.
			* Low F-number (e.g., f/1.8, f/3.5): Blurry background ("bokeh"), sharp subject. Perfect for macros or portraits.
			* High F-number (e.g., f/8, f/16): Everything is sharp from foreground to background. Perfect for scanning or documenting flat work.

			🌐 '''Visualizing Aperture:** [https://i.imgur.com/9HwN2g3.gifv Click here to see how aperture physically changes depth of field (via r/Filmmakers)].

			=== 2. Shutter Speed ($\mathbf{Tv}$) ===
			Controls time. Measured in fractions of a second.
			* Fast (e.g., 1/500s, 1/1000s): Freezes fast motion (pyrotechnics, moving parts).
			* Slow (e.g., 1/2s, 30s): Blurs motion. Note: Anything slower than 1/60s needs a tripod or your hands will shake and blur the whole image.

			=== 3. ISO (Sensor Sensitivity) ===
			* ISO 100 - 400: Use this for bright studio lights or outdoors. Cleanest images.
			* ISO 1600 - 6400: Use this if it's dark inside the workshop. Warning: Higher ISO adds "grain/noise" to your images.

			\| style="width: 35%;" valign="top" \|

			{\| style="width: 100%; background-color: #f8f9fa; border: 1px solid #e2e8f0; border-radius: 8px; padding: 15px; box-shadow: inset 0 1px 3px rgba(0,0,0,0.05);"
			\| style="padding: 5px;" \|
			<span style="font-size: 1.3em; font-weight: 700; color: #2d3748; display: block; border-bottom: 2px solid #edf2f7; padding-bottom: 8px; margin-bottom: 12px;">🛠️ Technical Data</span>

			'''📐 Sensor & Crop Factor'''
			* Sensor Size: APS-C CMOS (approx. 22.3 x 14.9 mm)
			* Resolution: 24.2 Megapixels
			* Crop Factor: 1.6x
			*: ''What this means for makers: If you put a 50mm lens on this body, it behaves like an 80mm lens due to the smaller sensor footprint.''

			🌐 '''Visualizing Crop Factor & Field of View:** [https://i.imgur.com/K6b6h.gif See how changing your focal length impacts your Field of View (via r/photography)].

			'''🔌 Inputs & Mounts'''
			* Lens Mount: Canon EF / EF-S
			* Storage: SD / SDHC / SDXC (UHS-I supported)
			* Video Max: 1080p Full HD at 30fps
			* Ports: ** Mini-USB (for PC data transfer)
			** Mini-HDMI (Type-C)
			** 3.5mm Microphone Jack
			** Remote Control Terminal

			'''🔋 Battery & Power'''
			* Battery Type: LP-E17 Lithium-ion
			* Live View Battery Life: ~180 shots
			* Viewfinder Battery Life: ~440 shots
			\|}

			\|}

			== 🎛️ Manual Modes & Dial Symbols ==
			Look at the top wheel. These are the symbols you need to know:

			* mathbf{M} (Manual): You have absolute control. You change the shutter speed with the main dial, and change aperture by holding down the 𝄥/🦿 (Av) button while turning the main dial.
			* mathbf{Av} (Aperture Priority): You pick the background blur (F-stop); the camera figures out the shutter speed automatically. Great for quick macro shots.
			* mathbf{Tv} (Shutter Priority): You pick the speed to freeze or blur motion; the camera figures out the F-stop.
			* mathbf{P} (Program AE): Advanced auto. The camera guesses the exposure, but lets you change things like flash and ISO manually.

			== 🔍 Focus Modes for Prototyping ==
			Switch this on the side of the physical lens body (AF / MF):
			* AF (Autofocus): Press shutter halfway to let the camera do the work.
			* MF (Manual Focus): Turn the ring on the very tip of the lens yourself. Use this if you are shooting inside a laser cutter/vacuum chamber where glass reflections confuse the automatic sensor.

Canontst

Rasmus Landhall — Thu, 21 May 2026 09:46:32 GMT

Skapade sidan med 'a'

Ny sida

Maskiner och inventarier

Rasmus Landhall — Wed, 20 May 2026 19:42:56 GMT

Visa ändringar

Rasmustest3

Rasmus Landhall — Wed, 20 May 2026 19:42:37 GMT

Visa ändringar

Rasmustest3

Rasmus Landhall — Wed, 20 May 2026 19:38:50 GMT

Skapade sidan med 'a'

Ny sida

Användare:Anisinanajj

Anisinanajj — Tue, 19 May 2026 16:39:41 GMT

Användarkonto Anisinanajj har skapats

Lokalen

Clifford.richardson — Mon, 18 May 2026 10:27:09 GMT

Translation to English with kept references to swedish pages

Visa ändringar

Välkommen till Stockholm Makerspace

Clifford.richardson — Mon, 18 May 2026 09:11:57 GMT

link direct to english welcome letter

← Äldre version		Versionen från 18 maj 2026 kl. 09.11
(En mellanliggande sidversion av samma användare visas inte)
Rad 1:		Rad 1:
			English translations are in progress. Links may point to a page that is written in Swedish, and will be annotated with '''(svenska)''' to help clarify this during the transition.

	{{DISPLAYTITLE:Välkommen till Stockholm Makerspace}}		{{DISPLAYTITLE:Välkommen till Stockholm Makerspace}}
	<div id="mainpage">		<div id="mainpage">
Rad 4:		Rad 6:
	\|-		\|-
	\| style="vertical-align:top;" width="50%" \|<div id="hauptseite-english" class="mainpage-left">		\| style="vertical-align:top;" width="50%" \|<div id="hauptseite-english" class="mainpage-left">
	==~~Jag vill veta mer om~~ Stockholm Makerspace==		==Learn more about Stockholm Makerspace==
	<div class="content" id="mf-tfa" title="more">		<div class="content" id="mf-tfa" title="more">
	*[[Makerspace_FAQ#Besöka Stockholm Makerspace\|🏠]] [[Makerspace_FAQ#Besöka Stockholm Makerspace\|~~Besök vår lokal~~]] - ~~Svar på hur du besöker lokalen.~~		*[[Makerspace_FAQ#Besöka Stockholm Makerspace\|🏠]] [[Makerspace_FAQ#Besöka Stockholm Makerspace\|Visit us]] - Information on how to visit our location (svenska)
	*👀 [[Lokalen\|~~Hur ser lokalerna ut?]]~~		*👀 [[Lokalen\|Makerspace layout]] - (svenska)
	*🪙 [https://www.makerspace.se/medlemskap Vad kostar det?]		*[[Styrelsen 2025\|The Makerspace Board (2025)]] - Learn who currently sits on the board. (svenska)
	*❔ [[Makerspace_FAQ\|Övriga frågor]] - ~~Svar på de flesta vanliga frågor som vi får.~~
	*[[Styrelsen 2025]] - ~~Här kan du se vilka medlemmar som sitter i styrelsen i år~~.

	</div>		</div>
Rad 16:		Rad 16:

	<div class="mainpage-left">		<div class="mainpage-left">
	==~~Jag vill bli medlem~~==		==How to become a member==
	<div class="content" id="mf-tfa" title="blimedlem">		<div class="content" id="mf-tfa" title="blimedlem">
	*<sup>✅</sup> [[Makerspace_FAQ#Bli medlem\|~~Hur blir jag medlem~~?]]		*<sup>✅</sup> [[Makerspace_FAQ#Bli medlem\|How do I become a member?]] - (svenska)
	*❔[[Makerspace_FAQ\|~~Vanliga frågor~~]] - ~~Svar på de flesta vanliga frågor som vi får~~.		*🪙 [https://www.makerspace.se/medlemskap How much does it cost to be a member?] - (svenska)
			*❔ [[Makerspace_FAQ\|FAQ]] - Common questions and answers. - (svenska)
	</div>		</div>
	</div>		</div>
Rad 26:		Rad 27:

	<div id="mainpage-links" class="mainpage-right">		<div id="mainpage-links" class="mainpage-right">
	==~~Jag är nybliven medlem~~==		==For new members==
	<div class="content" id="mf-itn" title="nymedlem">		<div class="content" id="mf-itn" title="nymedlem">
	*👋 [[~~Hej~~\|~~Välkomstbrev~~]] - ~~Läs detta om du precis har blivit medlem~~.		*👋 [[Hello\|Welcome Letter]] - Read if you have just become a member.
	*📜 [[Regler\|~~Regler~~]] - ~~Reglerna för medlemmar~~.		*📜 [[Regler\|Rules]] - Rules for all members to follow. (svenska)
	</div>		</div>
	</div>		</div>

	<div class="mainpage-right">		<div class="mainpage-right">
	==~~Jag är medlem~~==		==For all members==
	<div class="content" id="mf-tfa" title="redanmedlem">		<div class="content" id="mf-tfa" title="redanmedlem">
	*🛠️ [[Maskiner_och_inventarier\|~~Vår utrustning~~]] - ~~Lista över all vår utrustning~~.		*🛠️ [[Maskiner_och_inventarier\|Equipment]] - See our inventory of equipment. (svenska)
	*🧹 [[Städrutiner]] - ~~Hur man bär sig åt för att hålla makerspace rent och fint~~.		*🧹 [[Städrutiner\|Chores and Routines]] - How to contribute to a clean and well-organized Makerspace. (svenska)
	*🧑‍🏫 [[Workshops\|~~Att organisera en~~ workshop]]		*🧑‍🏫 [[Workshops\|How to organize a workshop]] - (svenska)
	*[[Förbrukningsmaterial]] - ~~Material som vi erbjuder till försäljning i lokalen~~.		*[[Förbrukningsmaterial\|Available Materials]] - See what we offer in our web shop. (svenska)
	</div>		</div>
	</div>		</div>

	<div class="mainpage-right">		<div class="mainpage-right">
	==~~Externa sidor~~==		==External links==
	<div class="content" id="mf-tfa" title="externasidor">		<div class="content" id="mf-tfa" title="externasidor">
	*[https://www.makerspace.se/medlemskap ~~Info om medlemskap~~]		*[https://www.makerspace.se/medlemskap General membership information] - (svenska)
	*📅 [https://www.makerspace.se/kalendarium ~~Kalendarium~~]		*📅 [https://www.makerspace.se/kalendarium Calendar] - (svenska)
	*👨[https://medlem.makerspace.se ~~Din medlemssida~~]		*👨[https://medlem.makerspace.se Member login] - (svenska)
	*🛒 [https://medlem.makerspace.se/shop ~~Medlemsshop~~]		*🛒 [https://medlem.makerspace.se/shop Member web shop] - (svenska)
	</div>		</div>

Användare:Clifford.richardson

Clifford.richardson — Mon, 18 May 2026 08:52:17 GMT

Användarkonto Clifford.richardson har skapats

Maskiner och inventarier

Daniel Bergman — Fri, 15 May 2026 20:45:36 GMT

Länkat in fler symaskiner

← Äldre version		Versionen från 15 maj 2026 kl. 20.45
Rad 188:		Rad 188:

	*[[Singer 29K4 skomakar/lädersymaskin]]		*[[Singer 29K4 skomakar/lädersymaskin]]
	*Singer 18-3 ~~lädermaskin[[Fil:Lädersymaskin .jpg\|miniatyr]][[Fil:Lädersy.jpg\|miniatyr~~]]		*[[Singer 18-3]] lädermaskin
	*[[Janome Coverpro CPX2000]] ~~Coverlock maskin~~		*[[Janome Coverpro CPX2000]] Coverlockmaskin
	*[[Juki MO-654DE]] ~~Overlock maskin~~		*[[Juki MO-654DE]] Overlockmaskin
	*[[Industrisymaskin Dürkopp 212]]		*[[Industrisymaskin Dürkopp 212]]
	*[[Minisymaskin Singer]]		*[[Minisymaskin Singer]]
	*Janome Easy Jeans 1800		*[[Janome Easy Jeans 1800]]
	*Janome Decor Monogram 7200 Elektronisk symaskin		*[[Janome Decor Monogram 7200]] Elektronisk symaskin

	===Skära===		===Skära===

XTool S1 laser

Emaus — Thu, 14 May 2026 14:23:48 GMT

Lasers can be used at the same time nowadays, according to Alex

← Äldre version		Versionen från 14 maj 2026 kl. 14.23
Rad 1:		Rad 1:
	{\|		{\|
	\|- style="color: black; background: #~~ffc9c9~~; border: 1px solid #~~d42b2b~~; padding: 10px; display: block;"		\|- style="color: black; background: #ff9900; border: 1px solid #b36b00; padding: 10px; display: block;"
	\|TEMPORARY: ~~Only~~ the Redsail ~~<u>'''OR'''</u> the~~ xTool lasers ~~can be~~ used at a time~~, NOT both~~. ~~This is a ventilation issue and work is being done to remedy the situation. If~~ the red light is blinking on the Redsail, turn off the xTool power strip~~, if they are not~~ being ~~used~~. (updated 2026-03-23)		\|TEMPORARY: There can be issues if the Redsail and xTool lasers are used at the same time. So if the red 🚨 light is blinking on the Redsail, you need to turn off the xTool power strip.
			Work is being done to remedy the situation. (updated 2026-05-17)
	\|}		\|}
	{\| class="wikitable"		{\| class="wikitable"

XTool F2 Ultra laser

Emaus — Thu, 14 May 2026 14:23:40 GMT

Lasers can be used at the same time nowadays, according to Alex

← Äldre version		Versionen från 14 maj 2026 kl. 14.23
Rad 1:		Rad 1:
	{\|		{\|
	\|- style="color: black; background: #~~ffc9c9~~; border: 1px solid #~~d42b2b~~; padding: 10px; display: block;"		\|- style="color: black; background: #ff9900; border: 1px solid #b36b00; padding: 10px; display: block;"
	\|TEMPORARY: ~~Only~~ the Redsail ~~<u>'''OR'''</u> the~~ xTool lasers ~~can be~~ used at a time~~, NOT both~~. ~~This is a ventilation issue and work is being done to remedy the situation. If~~ the red light is blinking on the Redsail, turn off the xTool power strip~~, if they are not~~ being ~~used~~. (updated 2026-03-23)		\|TEMPORARY: There can be issues if the Redsail and xTool lasers are used at the same time. So if the red 🚨 light is blinking on the Redsail, you need to turn off the xTool power strip.
			Work is being done to remedy the situation. (updated 2026-05-17)
	\|}		\|}
	{\|		{\|

Redsail Laser

Emaus — Thu, 14 May 2026 14:22:56 GMT

Lasers can be used at the same time nowadays, according to Alex

← Äldre version		Versionen från 14 maj 2026 kl. 14.22
Rad 4:		Rad 4:
	\|}		\|}
	{\|		{\|
	\|- style="color: black; background: #~~ffc9c9~~; border: 1px solid #~~d42b2b~~; padding: 10px; display: block;"		\|- style="color: black; background: #ff9900; border: 1px solid #b36b00; padding: 10px; display: block;"
	\|TEMPORARY: ~~Only~~ the Redsail ~~<u>'''OR'''</u> the~~ xTool lasers ~~can be~~ used at a time~~, NOT both~~. ~~This is a ventilation issue and work is being done to remedy the situation. If~~ the red light is blinking on the Redsail, turn off the xTool power strip~~, if they are not~~ being ~~used~~. (updated 2026-03-23)		\|TEMPORARY: There can be issues if the Redsail and xTool lasers are used at the same time. So if the red 🚨 light is blinking on the Redsail, you need to turn off the xTool power strip.
			Work is being done to remedy the situation. (updated 2026-05-17)
	\|}		\|}

Rasmustest

Rasmus Landhall — Tue, 12 May 2026 20:15:53 GMT

Finsmideshörnan

← Äldre version		Versionen från 12 maj 2026 kl. 20.15
(13 mellanliggande sidversioner av samma användare visas inte)
Rad 8:		Rad 8:
	==[[:Kategori:Syrummet\|<span style="font-family: bebas neue, sans-serif; font-size: 2.5rem; text-transform: uppercase; letter-spacing: 1px;">Textilrummet</span>]]==		==[[:Kategori:Syrummet\|<span style="font-family: bebas neue, sans-serif; font-size: 2.5rem; text-transform: uppercase; letter-spacing: 1px;">Textilrummet</span>]]==

	==Stora ~~rummet~~==		==<span style="font-family: 'Bebas Neue', 'Bebas Neue Fallback', sans-serif; font-size: 2.5rem;">Stora Rummet</span>==
	<div class="toccolours mw-collapsible"overflow:auto;">		<div class="toccolours mw-collapsible"overflow:auto;">
	<div style="font-weight:bold;line-height:1.6;"></div>		<div style="font-weight:bold;line-height:1.6;"></div>
Rad 183:		Rad 183:
	<div style="clear:both;"></div>		<div style="clear:both;"></div>

	==[[Fil:MS-Scissor.png\|43x43px\|link=]][[:Kategori:Syrummet\|<span style="font-family: 'Bebas Neue', 'Bebas Neue Fallback', sans-serif; font-size: 2.5rem;">Textilrummet</span>]]==		==[[Fil:MS-Scissor.png\|43x43px\|link=]] [[:Kategori:Syrummet\|<span style="font-family: 'Bebas Neue', 'Bebas Neue Fallback', sans-serif; font-size: 2.5rem;">Textilrummet</span>]]==

	<div style="float: right; clear: right; margin-left: 20px; margin-bottom: 20px;">		<div style="float: right; clear: right; margin-left: 20px; margin-bottom: 20px;">
Rad 244:		Rad 244:
	<div style="clear:both;"></div>		<div style="clear:both;"></div>

	==Blästerrummet==		==<span style="font-family: 'Bebas Neue', 'Bebas Neue Fallback', sans-serif; font-size: 2rem;">Blästerrummet</span>==
	<div class="toccolours mw-collapsible"overflow:auto;">		<div class="toccolours mw-collapsible"overflow:auto;">
	<div style="font-weight:bold;line-height:1.6;"></div>		<div style="font-weight:bold;line-height:1.6;"></div>
Rad 257:		Rad 257:
	<div style="clear:both;"></div>		<div style="clear:both;"></div>

	== 3D-~~printerrummet~~ ==		==<span style="font-family: 'Bebas Neue', 'Bebas Neue Fallback', sans-serif; font-size: 2rem;">3D-skrivarrummet</span>==
	<div style="float: right; clear: right; margin-left: 20px; margin-bottom: 20px;">		<div style="float: right; clear: right; margin-left: 20px; margin-bottom: 20px;">
	[[Fil:3dskrivar Dator.jpg\|miniatyr\|300px]]		[[Fil:3dskrivar Dator.jpg\|miniatyr\|300px]]
Rad 284:		Rad 284:
	*[[Prusa SL1S SPEED]] - SLA (Resin) 3D-skrivare		*[[Prusa SL1S SPEED]] - SLA (Resin) 3D-skrivare
	*[[3Doodler original]] 3D-skrivarpenna		*[[3Doodler original]] 3D-skrivarpenna
			*Mässing borste
			*olja
			*2st spacklar
	</div></div>		</div></div>
	<div style="clear:both;"></div>		<div style="clear:both;"></div>

	==~~Kemförvaring~~==		==<span style="font-family: 'Bebas Neue', 'Bebas Neue Fallback', sans-serif; font-size: 2rem;">Kem förvaring</span>==
	<div class="toccolours mw-collapsible"overflow:auto;">		<div class="toccolours mw-collapsible"overflow:auto;">
	<div style="font-weight:bold;line-height:1.6;"></div>		<div style="font-weight:bold;line-height:1.6;"></div>
Rad 293:		Rad 296:
	*Brandskåp		*Brandskåp
	</div></div>		</div></div>
	==Våtrummet==
			==<span style="font-family: 'Bebas Neue', 'Bebas Neue Fallback', sans-serif; font-size: 2rem;">Våtrummet</span>==
	<div class="toccolours mw-collapsible"overflow:auto;">		<div class="toccolours mw-collapsible"overflow:auto;">
	<div style="font-weight:bold;line-height:1.6;"></div>		<div style="font-weight:bold;line-height:1.6;"></div>
Rad 350:		Rad 354:
	<div style="clear:both;"></div>		<div style="clear:both;"></div>

	==Metallrummet==		==<span style="font-family: 'Bebas Neue', 'Bebas Neue Fallback', sans-serif; font-size: 2rem;">Metallrummet</span>==
	<div class="toccolours mw-collapsible"overflow:auto;">		<div class="toccolours mw-collapsible"overflow:auto;">
	<div style="font-weight:bold;line-height:1.6;"></div>		<div style="font-weight:bold;line-height:1.6;"></div>
	<div class="mw-collapsible-content">		<div class="mw-collapsible-content">

	<div style="float: right; clear: right; margin-left: 20px; margin-bottom: 20px;">		<div style="float: right; clear: right; margin-left: 20px; margin-bottom: 20px;">
	[[Fil:Stålborste.jpg\|miniatyr\|300px\|Slipmaskiner från Väster och Öster Tyskland]]		[[Fil:Stålborste.jpg\|miniatyr\|300px\|Slipmaskiner från Väster och Öster Tyskland]]
	<br clear="all" style="clear: both;" />		<br clear="all" style="clear: both;" />
	[[Fil:Metallsvarv.jpg\|miniatyr\|300px\|Metallsvarv [[EMCO Maximat 11]]]]		[[Fil:Metallsvarv.jpg\|miniatyr\|300px\|Metallsvarv [[EMCO Maximat 11]]]]
	<br clear="all" style="clear: both;" />		<br clear="all" style="clear: both;" />
	[[Fil:Metallrum Jan 29.jpg\|miniatyr\|300px\|Metallrummet]]		[[Fil:Metallrum Jan 29.jpg\|miniatyr\|300px\|Metallrummet]]
	<br clear="all" style="clear: both;" />		<br clear="all" style="clear: both;" />
	{\| class="mw-collapsible mw-collapsed wikitable" style="width: ~~220px~~; margin-top: 10px;"
			{\| class="mw-collapsible mw-collapsed wikitable" style="width: 300px; margin-top: 10px;"
	! 📷 Fler bilder (klicka för att visa/dölja)		! 📷 Fler bilder (klicka för att visa/dölja)
	\|-		\|-
	\|		\|
	[[Fil:Manuell CNC.jpg\|miniatyr\|~~220px\|höger\|Nylontrådar~~]]		<div style="display: flex; flex-direction: column; gap: 10px;">
	[[Fil:Metallrummet.jpg\|miniatyr\|~~220px\|höger\|Lädersymaskin~~]]		[[Fil:Manuell CNC.jpg\|miniatyr\|300px]]
	[[Fil:Concrete CNC.jpg\|miniatyr\|~~220px\|höger\|Lädersömnad~~]]		[[Fil:Metallrummet.jpg\|miniatyr\|300px]]
	[[Fil:CNC bygge.jpg\|miniatyr\|~~220px\|höger\|Lädersömnad~~]]		[[Fil:Concrete CNC.jpg\|miniatyr\|300px]]
			[[Fil:CNC bygge.jpg\|miniatyr\|300px]]
			</div>
	\|}		\|}
	</div>		</div>
Rad 412:		Rad 420:
	*Tryckluftsverktyg (Nibbler, mutterdragare, vinkelmutterdragare, luftpåfyllare)		*Tryckluftsverktyg (Nibbler, mutterdragare, vinkelmutterdragare, luftpåfyllare)
	*Vinkelkap / vinkelslip 255 mm		*Vinkelkap / vinkelslip 255 mm
	*Metallbandslip JSG 100, 100 mm x1220 mm band<~~br clear="all"~~ style="clear: both;" />		*Metallbandslip JSG 100, 100 mm x1220 mm band

			</div></div>

			<div style="clear:both;"></div>

	==[[Finsmideshörnan]]==		==<span style="font-family: 'Bebas Neue', 'Bebas Neue Fallback', sans-serif; font-size: 2rem;">Finsmideshörnan</span>==

	<div style="float: right; clear: right; margin-left: 20px; margin-bottom: 20px;">		<div style="float: right; clear: right; margin-left: 20px; margin-bottom: 20px;">
Rad 426:		Rad 438:
	\|		\|
	[[Fil:Finsmide Dremel.jpg\|miniatyr\|220px\|höger\|Nylontrådar]]		[[Fil:Finsmide Dremel.jpg\|miniatyr\|220px\|höger\|Nylontrådar]]
	~~[[Fil:Lädersymaskin .jpg\|miniatyr\|220px\|höger\|Lädersymaskin]]~~
	~~[[Fil:Lädersy.jpg\|miniatyr\|220px\|höger\|Lädersömnad]]~~
	\|}		\|}
	</div>		</div>
Rad 468:		Rad 478:
	<div class="toccolours mw-collapsible"overflow:auto;">		<div class="toccolours mw-collapsible"overflow:auto;">
	<div style="font-weight:bold;line-height:1.6;"></div>		<div style="font-weight:bold;line-height:1.6;"></div>
	<div class="mw-collapsible-content">[[Fil:trarummet.jpg\|thumb\|300px\|right]][[Fil:IM4640.jpg\|miniatyr]][[Fil:Trärum teamwork.jpg\|miniatyr]][[Fil:Tra_bits.jpg\|thumb\|200px\|right]]		<div class="mw-collapsible-content">[[Fil:trarummet.jpg\|thumb\|300px\|right]][[Fil:Trärummet.jpg\|miniatyr]][[Fil:IM4640.jpg\|miniatyr]][[Fil:Trärum teamwork.jpg\|miniatyr]][[Fil:Tra_bits.jpg\|thumb\|200px\|right]]
	[[Trärummet\|Info om trärummet (Komma igång, mm)]]		[[Trärummet\|Info om trärummet (Komma igång, mm)]]

Rad 510:		Rad 520:
	*Hyvlar		*Hyvlar
	*Stämjärn		*Stämjärn

			</div></div>
			<div style="clear:both;"></div>

	==Tryckluft==		==Tryckluft==

Fil:Trärummet.jpg

Rasmus Landhall — Tue, 12 May 2026 19:56:44 GMT

Rasmus Landhall laddade upp Fil:Trärummet.jpg

Ny sida

Taget av Rasmus Landhall

Rasmustest

Rasmus Landhall — Tue, 12 May 2026 19:53:02 GMT

Övrigt

← Äldre version		Versionen från 12 maj 2026 kl. 19.53
(5 mellanliggande sidversioner av samma användare visas inte)
Rad 355:		Rad 355:
	<div class="mw-collapsible-content">		<div class="mw-collapsible-content">
	<div style="float: right; clear: right; margin-left: 20px; margin-bottom: 20px;">		<div style="float: right; clear: right; margin-left: 20px; margin-bottom: 20px;">
	[[Fil:Stålborste.jpg\|miniatyr\|~~200px~~]]		[[Fil:Stålborste.jpg\|miniatyr\|300px\|Slipmaskiner från Väster och Öster Tyskland]]
	<br clear="all" style="clear: both;" />		<br clear="all" style="clear: both;" />
	[[Fil:Metallsvarv.jpg\|miniatyr\|~~200px~~]]		[[Fil:Metallsvarv.jpg\|miniatyr\|300px\|Metallsvarv [[EMCO Maximat 11]]]]
	<br clear="all" style="clear: both;" />		<br clear="all" style="clear: both;" />
	[[Fil:~~Manuell CNC~~.jpg\|miniatyr\|~~200px~~]]		[[Fil:Metallrum Jan 29.jpg\|miniatyr\|300px\|Metallrummet]]
	<br clear="all" style="clear: both;" />		<br clear="all" style="clear: both;" />
	{\| class="mw-collapsible mw-collapsed wikitable" style="width: 220px; margin-top: 10px;"		{\| class="mw-collapsible mw-collapsed wikitable" style="width: 220px; margin-top: 10px;"
Rad 367:		Rad 367:
	[[Fil:Manuell CNC.jpg\|miniatyr\|220px\|höger\|Nylontrådar]]		[[Fil:Manuell CNC.jpg\|miniatyr\|220px\|höger\|Nylontrådar]]
	[[Fil:Metallrummet.jpg\|miniatyr\|220px\|höger\|Lädersymaskin]]		[[Fil:Metallrummet.jpg\|miniatyr\|220px\|höger\|Lädersymaskin]]
	[[Fil:~~Lädersy~~.jpg\|miniatyr\|220px\|höger\|Lädersömnad]]		[[Fil:Concrete CNC.jpg\|miniatyr\|220px\|höger\|Lädersömnad]]
			[[Fil:CNC bygge.jpg\|miniatyr\|220px\|höger\|Lädersömnad]]
	\|}		\|}
	</div>		</div>
Rad 411:		Rad 412:
	*Tryckluftsverktyg (Nibbler, mutterdragare, vinkelmutterdragare, luftpåfyllare)		*Tryckluftsverktyg (Nibbler, mutterdragare, vinkelmutterdragare, luftpåfyllare)
	*Vinkelkap / vinkelslip 255 mm		*Vinkelkap / vinkelslip 255 mm
	*Metallbandslip JSG 100, 100 mm x1220 mm band		*Metallbandslip JSG 100, 100 mm x1220 mm band<br clear="all" style="clear: both;" />

	<br clear="all" style="clear: both;" />

	==[[Finsmideshörnan]]==		==[[Finsmideshörnan]]==
Rad 469:		Rad 468:
	<div class="toccolours mw-collapsible"overflow:auto;">		<div class="toccolours mw-collapsible"overflow:auto;">
	<div style="font-weight:bold;line-height:1.6;"></div>		<div style="font-weight:bold;line-height:1.6;"></div>
	<div class="mw-collapsible-content">[[Fil:~~Trärum teamwork~~.jpg\|~~miniatyr~~]][[Fil:~~trarummet~~.jpg\|~~thumb\|300px\|right~~]][[Fil:~~IM4640~~.jpg\|miniatyr]][[Fil:Tra_bits.jpg\|thumb\|200px\|right]]		<div class="mw-collapsible-content">[[Fil:trarummet.jpg\|thumb\|300px\|right]][[Fil:IM4640.jpg\|miniatyr]][[Fil:Trärum teamwork.jpg\|miniatyr]][[Fil:Tra_bits.jpg\|thumb\|200px\|right]]
	[[Trärummet\|Info om trärummet (Komma igång, mm)]]		[[Trärummet\|Info om trärummet (Komma igång, mm)]]

Rad 525:		Rad 524:
	*[[Pitney Bowes 5820 brevvåg]]		*[[Pitney Bowes 5820 brevvåg]]
	*[[Fileserver]] lokal lagring på makerspacet för dina projekt		*[[Fileserver]] lokal lagring på makerspacet för dina projekt
	*Ljudupptagningsutrustning Zoom H1 ljudinspelare samt Rode SmartLav+ mikrofoner (förvaras i styrelseskåpet, kontakta styrelsen på [mailto:info@makerspace.se info@makerspace.se] eller på Slack om du vill använda dem)[[Fil:Zoom H1 Rode SmartLav+ mikrofonset.jpg\|miniatyr\|centrerad]]		*Ljudupptagningsutrustning Zoom H1 ljudinspelare samt Rode SmartLav+ mikrofoner (förvaras i styrelseskåpet, kontakta styrelsen på [mailto:info@makerspace.se info@makerspace.se] eller på Slack om du vill använda dem)
			*Stativ
			*2x RGB led lampor[[Fil:Zoom H1 Rode SmartLav+ mikrofonset.jpg\|miniatyr\|centrerad]]

	==Ej i lokalen & Tidigare maskiner==		==Ej i lokalen & Tidigare maskiner==

Fil:Metallrum Jan 29.jpg

Rasmus Landhall — Tue, 12 May 2026 19:46:42 GMT

Rasmus Landhall laddade upp Fil:Metallrum Jan 29.jpg

Ny sida

Taget av Rasmus Landhall

← Äldre version		Versionen från 21 maj 2026 kl. 09.46
Rad 1:		Rad 1:
	a		{\| style="width:100%; border-spacing:0; font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;"
			\| style="background: linear-gradient(135deg, #111 0%, #333 100%); padding: 25px; border-radius: 8px 8px 0 0; color: #fff; box-shadow: 0 4px 6px rgba(0,0,0,0.1);" \|
			<span style="font-size: 2.2em; font-weight: 800; letter-spacing: -0.5px; display: block; margin-bottom: 5px;">Canon EOS 750D (Rebel T6i)</span>
			<span style="font-size: 1.1em; color: #aaa; font-weight: 300;">The Makerspace Quick-Start Guide & Cheat Sheet</span>
			\|}

			{\| style="width: 100%; margin-top: 20px; border-collapse: collapse;" valign="top"
			\| style="width: 65%; padding-right: 20px;" valign="top" \|

			== 🚀 The "Just Let Me Shoot" Quick Start ==
			If you don't want a lecture and just need a working photo right now, follow these steps:

			# Power Up: Turn the switch on top to ⟳ '''ON'''. (The step past ON is for Video mode 📹).
			# Go Full Auto: Turn the top mode dial to the green Ⓐ<sup>+</sup> symbol (Scene Intelligent Auto). The camera will handle focus, exposure, and flash for you.
			# Frame & Focus: Look through the viewfinder (or press the 📋 button to use the screen). Lightly press the shutter button '''halfway down''' until it beeps and a green dot lights up. This means it has locked focus.
			# Shoot: Press the button the rest of the way down.

			<div style="background-color: #fff9e6; border-left: 5px solid #f0ad4e; padding: 15px; margin: 20px 0; border-radius: 4px; color: #333;">
			'''💡 Makerspace Rule:''' When you are done, please put the battery back in the charging station, wipe down the lens with microfiber cloth ''only'', and clear your photos from the SD card.
			</div>

			== 🎨 The Esthetician's Guide to Manual Settings ==
			To control the actual look and mood of your shot, flip the mode dial to mathbf{M} (Manual). You need to balance three things (The Exposure Triangle):

			=== 1. Aperture (Depth of Field) ===
			Controls how blurry your background is.
			* Low F-number (e.g., f/1.8, f/3.5): Blurry background ("bokeh"), sharp subject. Perfect for macros or portraits.
			* High F-number (e.g., f/8, f/16): Everything is sharp from foreground to background. Perfect for scanning or documenting flat work.

			🌐 '''Visualizing Aperture:** [https://i.imgur.com/9HwN2g3.gifv Click here to see how aperture physically changes depth of field (via r/Filmmakers)].

			=== 2. Shutter Speed ($\mathbf{Tv}$) ===
			Controls time. Measured in fractions of a second.
			* Fast (e.g., 1/500s, 1/1000s): Freezes fast motion (pyrotechnics, moving parts).
			* Slow (e.g., 1/2s, 30s): Blurs motion. Note: Anything slower than 1/60s needs a tripod or your hands will shake and blur the whole image.

			=== 3. ISO (Sensor Sensitivity) ===
			* ISO 100 - 400: Use this for bright studio lights or outdoors. Cleanest images.
			* ISO 1600 - 6400: Use this if it's dark inside the workshop. Warning: Higher ISO adds "grain/noise" to your images.

			\| style="width: 35%;" valign="top" \|

			{\| style="width: 100%; background-color: #f8f9fa; border: 1px solid #e2e8f0; border-radius: 8px; padding: 15px; box-shadow: inset 0 1px 3px rgba(0,0,0,0.05);"
			\| style="padding: 5px;" \|
			<span style="font-size: 1.3em; font-weight: 700; color: #2d3748; display: block; border-bottom: 2px solid #edf2f7; padding-bottom: 8px; margin-bottom: 12px;">🛠️ Technical Data</span>

			'''📐 Sensor & Crop Factor'''
			* Sensor Size: APS-C CMOS (approx. 22.3 x 14.9 mm)
			* Resolution: 24.2 Megapixels
			* Crop Factor: 1.6x
			*: ''What this means for makers: If you put a 50mm lens on this body, it behaves like an 80mm lens due to the smaller sensor footprint.''

			🌐 '''Visualizing Crop Factor & Field of View:** [https://i.imgur.com/K6b6h.gif See how changing your focal length impacts your Field of View (via r/photography)].

			'''🔌 Inputs & Mounts'''
			* Lens Mount: Canon EF / EF-S
			* Storage: SD / SDHC / SDXC (UHS-I supported)
			* Video Max: 1080p Full HD at 30fps
			* Ports: ** Mini-USB (for PC data transfer)
			** Mini-HDMI (Type-C)
			** 3.5mm Microphone Jack
			** Remote Control Terminal

			'''🔋 Battery & Power'''
			* Battery Type: LP-E17 Lithium-ion
			* Live View Battery Life: ~180 shots
			* Viewfinder Battery Life: ~440 shots
			\|}

			\|}

			== 🎛️ Manual Modes & Dial Symbols ==
			Look at the top wheel. These are the symbols you need to know:

			* mathbf{M} (Manual): You have absolute control. You change the shutter speed with the main dial, and change aperture by holding down the 𝄥/🦿 (Av) button while turning the main dial.
			* mathbf{Av} (Aperture Priority): You pick the background blur (F-stop); the camera figures out the shutter speed automatically. Great for quick macro shots.
			* mathbf{Tv} (Shutter Priority): You pick the speed to freeze or blur motion; the camera figures out the F-stop.
			* mathbf{P} (Program AE): Advanced auto. The camera guesses the exposure, but lets you change things like flash and ISO manually.

			== 🔍 Focus Modes for Prototyping ==
			Switch this on the side of the physical lens body (AF / MF):
			* AF (Autofocus): Press shutter halfway to let the camera do the work.
			* MF (Manual Focus): Turn the ring on the very tip of the lens yourself. Use this if you are shooting inside a laser cutter/vacuum chamber where glass reflections confuse the automatic sensor.