Electronics — Open questions
Identification and setup details to verify for the Electronics room. Photos were taken by Erik Cederberg on 13 October 2026. Equipment can share an enclosure style while having different ratings; record the label before choosing model-specific instructions.
Models not readable in the new photos
Item | Photo and next check |
|---|---|
Digital camera microscope | Blue camera, black zoom lens and post stand. Read the camera and lens labels separately, plus available outputs/software. It is different from the white binocular AmScope. |
Digital Weller soldering station | Read the power-unit type plate and iron/holder labels. Brand is visible; exact model is unconfirmed. |
Existing TENMA hot-air station | Same unit as the existing page photograph; front identification is covered by the VARMLUFTSSTATION label. Record its model from the type plate. |
Existing TENMA preheater | Small black heater on top of the T-962A oven. Brand is visible; photograph its blurred side label more clearly. |
Additional grey soldering station | Far-right bench position in the overview, with an integrated rest and yellow-grip iron, partly hidden by the fan. Read its make/model before creating a page. |
Unidentified digital camera microscope, 13 October 2026
Weller digital station, model to verify
TENMA hot-air station with covered front identification
TENMA preheater on the T-962A oven
Setup and policy checks
Read the RIDEN RD6018 assembled enclosure's input-supply rating; record its actual continuous output limit. Confirm firmware and whether a Wi-Fi option is fitted.
Confirm the WHA 900 nozzle inventory and any foot switch, and whether saved standby is enabled.
Record current electronics-room access/training arrangements and fault-reporting contact. Do not infer these from the presence of equipment.
Check the fume-extractor filters and current spares. The existing page's June 2019 replacement/stock note is historical.
Documentation updated 15 October 2026.