CarveraAir-Feeds&Speeds
Starting values for the Carvera Air, copied from Makera. Feed and plunge feed (PFeed) in mm/min, depth of cut (DOC) in mm. Check against your actual tool. The material columns don't change which materials are allowed — see the main page.
Group | Tools | Aluminum | Brass | Copper | Hardwood | PCB | Plastic | Softwood |
|---|---|---|---|---|---|---|---|---|
Single Flute Metal | 1*3mm Flat End(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:300 PFeed:100 DOC:0.05 | RPM:12000 Feed:300 PFeed:100 DOC:0.05 | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 | - | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 | RPM:10000 Feed:1000 PFeed:300 DOC:1 |
1.5*6mm Flat End(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:300 PFeed:100 DOC:0.05 | RPM:12000 Feed:300 PFeed:100 DOC:0.05 | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 | - | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
2*8mm Flat End(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.15 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 | - | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
2.5*12mm Flat End(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:2 | |
3.175*12mm Flat End(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:2 | |
Single Flute Non Metal | 1*3mm Flat End | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 | - | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 | RPM:10000 Feed:1000 PFeed:300 DOC:1 |
1.5*8mm Flat End | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 | - | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
2*12mm Flat End | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 | - | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
2.5*15mm Flat End | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:2 | |
3.175*17mm Flat End | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:2 | |
3.175*25mm Flat End | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:2 | |
3.175*32mm Flat End | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:2 | |
3.175*42mm Flat End | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:2 | |
Engraving Metal | 0.1mm*60° Engraving(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:1000 PFeed:500 DOC:2 |
0.2mm*30° Engraving(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:1000 PFeed:500 DOC:2 | |
0.3mm*30° Engraving(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:1000 PFeed:500 DOC:2 | |
0.4mm*30° Engraving(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:1000 PFeed:500 DOC:2 | |
0.5mm*30° Engraving(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:12000 Feed:300 PFeed:100 DOC:0.1 | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:1000 PFeed:500 DOC:2 | |
Engraving Non Metal | 0.1mm*30° Engraving | - | - | - | RPM:12000 Feed:1000 PFeed:500 DOC:1 | - | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:1000 PFeed:500 DOC:2 |
0.2mm*30° Engraving | - | - | - | RPM:12000 Feed:1000 PFeed:500 DOC:1 | - | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:1000 PFeed:500 DOC:2 | |
0.3mm*30° Engraving | - | - | - | RPM:12000 Feed:1000 PFeed:500 DOC:1 | - | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:1000 PFeed:500 DOC:2 | |
0.4mm*30° Engraving | - | - | - | RPM:12000 Feed:1000 PFeed:500 DOC:1 | - | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:1000 PFeed:500 DOC:2 | |
0.5mm*30° Engraving | - | - | - | RPM:12000 Feed:1000 PFeed:500 DOC:1 | - | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:1000 PFeed:500 DOC:2 | |
Ball Nose Metal | 1*3mm ball nose(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:500 PFeed:200 DOC:1 | - | RPM:12000 Feed:500 PFeed:200 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:2 |
1.5*4.5mm ball nose(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:500 PFeed:200 DOC:1 | - | RPM:12000 Feed:500 PFeed:200 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:2 | |
2*6mm ball nose(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:500 PFeed:200 DOC:1 | - | RPM:12000 Feed:500 PFeed:200 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:2 | |
2.5*7.5mm ball nose(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:500 PFeed:200 DOC:1 | - | RPM:12000 Feed:500 PFeed:200 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:2 | |
3.175*10mm ball nose(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:500 PFeed:200 DOC:1 | - | RPM:12000 Feed:500 PFeed:200 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:2 | |
Ball Nose Non Metal | 1*4mm ball nose | - | - | - | RPM:12000 Feed:500 PFeed:200 DOC:1 | - | RPM:12000 Feed:500 PFeed:200 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:2 |
1.5*8mm ball nose | - | - | - | RPM:12000 Feed:500 PFeed:200 DOC:1 | - | RPM:12000 Feed:500 PFeed:200 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:2 | |
2*12mm ball nose | - | - | - | RPM:12000 Feed:500 PFeed:200 DOC:1 | - | RPM:12000 Feed:500 PFeed:200 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:2 | |
2.5*15mm ball nose | - | - | - | RPM:12000 Feed:500 PFeed:200 DOC:1 | - | RPM:12000 Feed:500 PFeed:200 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:2 | |
3.175*22mm ball nose | - | - | - | RPM:12000 Feed:500 PFeed:200 DOC:1 | - | RPM:12000 Feed:500 PFeed:200 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:2 | |
Corn Bits | 0.6mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - |
0.7mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
0.8mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
0.9mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
1.1mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
1.2mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
1.3mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
1.4mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
1.5mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
1.6mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
1.7mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
1.8mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
1.9mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
1mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
2.1mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
2.4mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
2.5mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
2mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
3.175mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
3mm Corn | - | - | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 | - | - | |
Drill | 0.2*3.5mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 |
0.3*5.5mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:1 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
0.4*7mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
0.5*8.5mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
0.6*9.5mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
0.7*10mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
0.8*10mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
0.9*10mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
1*10mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
1.1*10mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
1.2*10mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
1.3*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
1.4*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
1.5*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
1.6*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
1.7*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
1.8*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
1.9*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
2*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
2.1*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
2.2*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
2.3*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
2.4*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
2.5*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
2.6*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
2.7*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
2.8*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
2.9*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
3*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
3.175*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:200 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | RPM:10000 Feed:1000 PFeed:300 DOC:1 | |
Chamfering Bits | 0.1mm*90° Chamfering | RPM:12000 Feed:600 PFeed:200 DOC:0.2 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:500 PFeed:200 DOC:0.1 | RPM:12000 Feed:1000 PFeed:500 DOC:1 | RPM:12000 Feed:1200 PFeed:500 DOC:2 |
Solder Mask Remover | 0.3mm*30° Solder Mask Removal | - | - | - | - | RPM:6000 Feed:400 PFeed:200 DOC:0.2 | - | - |