Electronic component storage
Shared component drawers in the Electronics room. Each drawer is labelled with a code (e.g. GD07); the table lists what's in each. Put components back in the right drawer.
Drawer | Type | Details | Package |
|---|---|---|---|
GD08 | |||
GD07 | Relä | gult | |
GD06 | Switch | Vipparm 1-0-1 | |
GD09 | Stiftlist | 1 | |
GD10 | Relä | Latching | SMD |
GD11 | Axiell | ||
GD05 | LED | 1 | |
GD04 | - | ||
GD03 | LDR | Ljuskänslig resistor | |
GD02 | uCPU | Atmega 64 | DIP40? |
GD01 | |||
GC11 | DIP-switchar | Blandat | DIL |
GC10 | |||
GC09 | |||
GC08 | |||
GC07 | Relä | Blandat | |
GC06 | Switch | Push?? | |
GC05 | LED | Röd | THT |
GC4 | IC | ||
GC03 | Diodbrygga | Likriktarbrygga KBPC35-04 | |
GC02 | IC | MAX530 12-bit DAC | DIP-24 |
GC09 | LDO | Negativ LDO -5V | TO220 |
GD12 | trimmotstånd | ||
GD11 | Axiel | ||
GD10 | Relä | Latching | SMD SO12? |
GB06 | Fuseholder | 5 mm fuse hodler | |
GB05 | Stiftlist | ||
GB04 | Fuseholder? | ||
GB03 | |||
GB02 | Cy7c421-10 | ASync FIfo | DIP |
GB01 | LDO | 7805 | TO220 TO92 |
GA12 | Triac | BTA212-800B | TO220 |
GA11 | ? | ||
GA10 | Switch | 1-0-1? Rotary? | |
GA09 | |||
GA08 | |||
GA07 | Relä | ||
GA06 | |||
GA05 | Powerinlet | Threeprong fused | |
GA04 | Optoisolator | MOC3063 | triac? |
GA03 | Diode | FMP G2pP? | Plastic To22 |
GA02 | |||
GA01 | LDO | 7905, LM2940, LP396ET | |
GB12 | Triac | TO220 | |
GB11 | Connector | Headphonejack SJ1-3513N | |
GB10 | |||
GB09 | |||
GB08 | Trafo | 2x18V 6VA | |
GB07 | Relay | ||
AC01 | Kontakt | Simm slot | |
AC02 | Kontakt | Barrel jack | |
AC03 | Dido | Fullbryss likriktare 600V | |
AC04 | Kondensator | 470nF 275VAC X2 | |
AC05 | Kondensator | 680uF 50V | |
AC06 | Kondensator | 1800uF 50V | |
AC07 | |||
AA01 | Kontakt | SMA | PCB |
AA02 | Kontakt | ? | |
AA03 | Kontakt | DIN -Speaker terminal | |
AA04 | Kabelgenomföring ummi | ||
AA05 | Kontakt | Carde edge connector | |
AA06 | Kondensator | 1200uF 35V | |
AB01 | |||
AB02 | Kontakt | Barreljack | |
AB03 | |||
AB04 | |||
AB05 | Kondensator | 270uF 100V | |
AB06 | Kondensator | 1800uF 35V | |
AB07 | Resostor | Potenitometer 2x100K Lin | |
AB=8 | |||
AB09 | |||
AB10 | |||
AD01 | DPDT Momentary pushbutton | ||
AD02 | |||
AD03 | Switch | 1-0-1 Switch | |
AD04 | Kondensastor | 33uF 100V | |
AD95 | 680uF 63V | ||
AD06 | 3300uF 35V | ||
AD09 | 10000-uF 50V | ||
AD10 | |||
AE01 | Connector | multi pin housing | |
AE02 | 1-0-1 Switch | ||
AE03 | 150uF 160V | ||
AE04 | 220uF 100V | ||
AE05 | Card edge connector | ||
AE08 | |||
BB01 | r | 5k1 0w6 | |
BB02 | 1r5 | ||
9r | |||
3r9 5w | |||
33r | |||
62r | |||
270r 3w | |||
560r 3w | |||
1k5 3w | |||
3k3 20w | |||
6k9 20w | |||
BB12 | 12k 5w | ||
BA01 | 0r005 5w | ||
0r68 4w | |||
3r9 4w | |||
8r2 | |||
22r 17w | |||
82r 3w | |||
220r 15w | |||
470r | |||
5k6 | |||
Storage layout and shared tools
These notes were consolidated on 15 October 2026 from the earlier electronics-room pages. The layout and drawer inventories still need a physical check; confirm the current labels before taking components. The earlier notes distinguish shared consumables from tools that stay in the room.
Area | Earlier storage notes |
|---|---|
Left side | Repair tools and supplies for use in the room, not for taking away. Data cables, tape and spare parts were recorded here. |
Middle boxes | Holders, multimeters, oscilloscope probes, solder/wick/flux, crimping items and the phone-repair kit. |
Right side | Shared components: take only what you need and follow current labels. Shelf 1 was backup stock; shelf 2 held larger components, SMD items, LEDs/strips and switches; shelf 3 held the small-component drawers. |
Pegboard | Return scissors, wire strippers, pliers, calipers, ferrule crimpers and screwdrivers to their places after use. |
The middle boxes were recorded as SAMLA 401.029.78, approximately 25 × 33 × 13 cm inside; check the physical box before buying replacements.
Inventory references
Component drawer inventory — August 2026 transcription contains a larger transcription, with 344 distinct drawer codes. Keep it alongside the smaller table above until drawer labels and conflicting entries have been checked; neither list establishes current quantities.
Electronics storage — legacy notes and photos preserves the earlier room and storage photographs.
Storage reference photos
Pegboard tools — earlier layout
Left-side storage — earlier layout
Middle storage boxes — earlier layout
Phone-repair kit — earlier photograph
Right-side storage — earlier layout
Larger components — earlier shelf layout
Small-component drawers — earlier shelf layout