Carvera Air - Versionshistorik

Bjornbergenheim: /* Wasteboard files */

2026-06-07T23:30:15Z

Wasteboard files

← Äldre version		Versionen från 7 juni 2026 kl. 23.30
Rad 95:		Rad 95:

	= Wasteboard files =		= Wasteboard files =

			If you want to cut out a new wasteboard to use, download dfx files from [https://www.printables.com/model/1162653-carvera-air-spoilboard/files here] and then use the lasercutter. Use 3-5mm mdf.


	== Ägandeförhållande ==		== Ägandeförhållande ==
	Denna maskin ägs av Stockholm Makerspace.		Denna maskin ägs av Stockholm Makerspace.

Bjornbergenheim den 7 juni 2026 kl. 23.26

2026-06-07T23:26:57Z

← Äldre version		Versionen från 7 juni 2026 kl. 23.26
Rad 94:		Rad 94:
	[[CarveraAir-Feeds&Speeds\|Refer this page]]		[[CarveraAir-Feeds&Speeds\|Refer this page]]

			= Wasteboard files =

	== Ägandeförhållande ==		== Ägandeförhållande ==
	Denna maskin ägs av Stockholm Makerspace.		Denna maskin ägs av Stockholm Makerspace.

Prakash den 15 mars 2025 kl. 10.40

2025-03-15T10:40:44Z

Visa ändringar

Prakash den 15 mars 2025 kl. 10.36

2025-03-15T10:36:53Z

← Äldre version		Versionen från 15 mars 2025 kl. 10.36
Rad 36:		Rad 36:
	Fil:Controller.png		Fil:Controller.png
	</gallery>		</gallery>
	~~- If you are running for first time, you will need to search the machine name in WiFi. When you search, you will find it with the name Makerspace_CarveraAir~~

	~~- Select the icon on the bottom left~~

	~~<<screenshot>>~~		- If you are running for first time, you will need to search the machine name in WiFi. When you search, you will find it with the name '''''Makerspace_CarveraAir'''''

	~~- Browse and select your nc file~~

	~~<<screenshot>>~~		In this video, we are guided through uploading a GCode file to Carvera Air Desktop CNC by Makera! After designing a part and preparing it in CAM software, you will need to upload the exported GCode file to the Carvera Air to begin manufacturing. This is done through the Carvera Controller app, as all files are stored on the Carvera Air's internal memory as shown in this tutorial.

	~~- Upload~~		<youtube>ysmz5AFIHmM </youtube>

	<~~<screenshot>~~>

	~~- Close the dialog and select your nc file~~

	<<~~screenshot>~~>

	== Attaching Z-Probe ==		== Attaching Z-Probe ==
Rad 92:		Rad 83:
	<youtube> IaVHlaHvsBk </youtube>		<youtube> IaVHlaHvsBk </youtube>

	~~= How to Upload a File =~~
	In this video, we are guided through uploading a GCode file to Carvera Air Desktop CNC by Makera! After designing a part and preparing it in CAM software, you will need to upload the exported GCode file to the Carvera Air to begin manufacturing. This is done through the Carvera Controller app, as all files are stored on the Carvera Air's internal memory as shown in this tutorial.

	~~<youtube>ysmz5AFIHmM </youtube>~~

Prakash den 15 mars 2025 kl. 10.34

2025-03-15T10:34:30Z

← Äldre version		Versionen från 15 mars 2025 kl. 10.34
Rad 25:		Rad 25:

	== Prepare your GCode ==		== Prepare your GCode ==
	'''- Please refer this page for adding Carvera profile and post processor in Fusion 360, VCarve Desktop'''~~<gallery>~~		'''- Please refer this page for adding Carvera profile and post processor in Fusion 360, VCarve Desktop'''
	~~Fil:Controller.png~~
	~~</gallery>~~https://github.com/MakeraInc/CarveraProfiles		https://github.com/MakeraInc/CarveraProfiles

	== Install Controller software ==		== Install Controller software ==
Rad 33:		Rad 33:

	== Upload your GCode to Carvera Air ==		== Upload your GCode to Carvera Air ==
	~~[[Fil:Controller.png\|miniatyr]]~~		- Launch Carvera Controller software<gallery>
	- Launch Carvera Controller software		Fil:Controller.png
			</gallery>


	- If you are running for first time, you will need to search the machine name in WiFi. When you search, you will find it with the name Makerspace_CarveraAir		- If you are running for first time, you will need to search the machine name in WiFi. When you search, you will find it with the name Makerspace_CarveraAir

	- Select the icon on the bottom left		- Select the icon on the bottom left

			<<screenshot>>

	- Browse and select your nc file		- Browse and select your nc file

			<<screenshot>>

	- Upload		- Upload

			<<screenshot>>

	- Close the dialog and select your nc file		- Close the dialog and select your nc file

			<<screenshot>>

			== Attaching Z-Probe ==


			<< TODO >>

	~~- Install controller software~~		== Changing bit / endmill ==

	~~- Upload them to network drive.. <<location>>~~

	~~- Launch Carvera Controller software~~		<< TODO >>

	~~- Screenshots~~		== Holding your Stock ==


			<< TODO >>

			== Cleaning ==
			<< TODO >>

Prakash den 15 mars 2025 kl. 10.30

2025-03-15T10:30:19Z

← Äldre version		Versionen från 15 mars 2025 kl. 10.30
Rad 19:		Rad 19:

	= How to use =		= How to use =

			The following steps assumes you have prepared your Gcode from your favorite CAM software.

			As an alternative, you can also use Makera CAM software. The steps are described here <<TODO>>

			== Prepare your GCode ==
			'''- Please refer this page for adding Carvera profile and post processor in Fusion 360, VCarve Desktop'''<gallery>
			Fil:Controller.png
			</gallery>https://github.com/MakeraInc/CarveraProfiles

			== Install Controller software ==
			The Controller software for Carvera Air will most likely be installed on a common computer or a tablet that is attached to the device. Until then or If you prefer to have it installed on your own computer, you can do so from https://github.com/MakeraInc/CarveraController

			== Upload your GCode to Carvera Air ==
			[[Fil:Controller.png\|miniatyr]]
			- Launch Carvera Controller software



			- If you are running for first time, you will need to search the machine name in WiFi. When you search, you will find it with the name Makerspace_CarveraAir

			- Select the icon on the bottom left

			- Browse and select your nc file

			- Upload

			- Close the dialog and select your nc file


			- Install controller software

			- Upload them to network drive.. <<location>>

			- Launch Carvera Controller software

			- Screenshots

Prakash den 21 februari 2025 kl. 13.02

2025-02-21T13:02:34Z

← Äldre version		Versionen från 21 februari 2025 kl. 13.02
Rad 38:		Rad 38:
	In this video, we are guided through using the Quick Tool Change System on the Carvera Air Desktop CNC by Makera! The Air is equipped with a unique tool change system which allows for users to connect an easily swap the bit (also known as a cutting tool) on their CNC		In this video, we are guided through using the Quick Tool Change System on the Carvera Air Desktop CNC by Makera! The Air is equipped with a unique tool change system which allows for users to connect an easily swap the bit (also known as a cutting tool) on their CNC

	<youtube>~~ysmz5AFIHmM~~</youtube>		<youtube> IaVHlaHvsBk </youtube>

	= How to Upload a File =		= How to Upload a File =

Prakash den 21 februari 2025 kl. 13.00

2025-02-21T13:00:06Z

← Äldre version		Versionen från 21 februari 2025 kl. 13.00
Rad 22:		Rad 22:

	https://wiki.makera.com/en/Air/How-Tos		https://wiki.makera.com/en/Air/How-Tos

			= Choosing Bits =

			In this video, we look at the different types of bits, also known as cutting tools, that you might consider for your CNC Project. Bits are what perform the cutting operations when manufacturing our projects, and choosing the correct bit to perform the type of cut we want on the material we are using is key. This video overviews the commonly used milling bits that are provided with the Carvera and Carvera Air, as well as some specialty bits for more complex projects too!

			<youtube>hccjn5_Wnwc</youtube>

			= Choosing Stock =

			Stock is the term used to describe the material we used to manufacture our CNC projects. Versatile desktop CNC machines like the Carvera and Carvera Air can work with a wide range of materials, including woods, acrylic, composites, metals, and even printed circuit boards! As you choose the right stock for your project, there are some key considerations like choosing the right bits and speeds and feeds as well as needs for external cooling that will contribute towards the success of your project. This video also discusses the good practice for performing test cuts as we start a new project
			<youtube>WUZIIvb-mHE</youtube>

	= How to change the tool =		= How to change the tool =

			In this video, we are guided through using the Quick Tool Change System on the Carvera Air Desktop CNC by Makera! The Air is equipped with a unique tool change system which allows for users to connect an easily swap the bit (also known as a cutting tool) on their CNC

	<youtube>ysmz5AFIHmM</youtube>		<youtube>ysmz5AFIHmM</youtube>

Rad 33:		Rad 47:

	= Manual - How to change Spindle Collet =		= Manual - How to change Spindle Collet =
			In this video, we are guided through changing the Spindle Collect on the Carvera Air Desktop CNC by Makera! Spindle Collet is the part of a CNC Spindle which that holds the bit. By changing the collet, you can change the diameter bit used for your CNC projects with the Carvera Air!


	<youtube>ZFmA60eqgx0</youtube>		<youtube>ZFmA60eqgx0</youtube>

Prakash den 21 februari 2025 kl. 12.46

2025-02-21T12:46:11Z

← Äldre version		Versionen från 21 februari 2025 kl. 12.46
Rad 23:		Rad 23:
	https://wiki.makera.com/en/Air/How-Tos		https://wiki.makera.com/en/Air/How-Tos

	= How to ~~Connect~~ =		= How to change the tool =
			<youtube>ysmz5AFIHmM</youtube>
	<youtube>~~6PaOHU8snjY~~</youtube>

	= How to Upload a File =		= How to Upload a File =

Prakash den 21 februari 2025 kl. 12.42

2025-02-21T12:42:10Z

← Äldre version		Versionen från 21 februari 2025 kl. 12.42
Rad 23:		Rad 23:
	https://wiki.makera.com/en/Air/How-Tos		https://wiki.makera.com/en/Air/How-Tos

			= How to Connect =

			<youtube>6PaOHU8snjY</youtube>

	= How to Upload a File =		= How to Upload a File =