Cutting Machine Silhouette Cameo Pro MK-II - Versionshistorik

Bjornbergenheim: /* Software preparation */Namnet matchar det i programmet nu

2026-03-04T16:49:27Z

Software preparation: Namnet matchar det i programmet nu

← Äldre version		Versionen från 4 mars 2026 kl. 16.49
Rad 45:		Rad 45:
	=== Software preparation ===		=== Software preparation ===
	# Start ''Silhouette Studio'' on the computer next to the cutting machines.		# Start ''Silhouette Studio'' on the computer next to the cutting machines.
	# Select Cameo Pro ~~MK-II~~ in the top right white box. It should say "ready" in green letters, if not, check that it's		# Select Cameo Pro Mark 2 in the top right white box. It should say "ready" in green letters, if not, check that it's
	## Turned on		## Turned on
	## Connected via USB		## Connected via USB

Arru: /* Preparing the material feed */ tips

2025-12-04T19:48:55Z

Preparing the material feed: tips

← Äldre version		Versionen från 4 december 2025 kl. 19.48
Rad 34:		Rad 34:
	## Mat: remove roll support if needed, ''[mat attachment instructions pending]''		## Mat: remove roll support if needed, ''[mat attachment instructions pending]''

	# Adjust the rollers so that the outermost ones sit close to the edge of the foil/mat, and the rest are evenly spaced across		# Adjust the rollers so that the outermost ones sit close to the edge of the foil/mat, and the rest are evenly spaced across. ''If the mat twists as it is loading, check again that the outermost rollers are in a good place.''
	# Push the material up against the intake		# Push the material up against the intake
	# Line up your material with the alignment indicator to the left of the intake		# Line up your material with the alignment indicator to the left of the intake

Arru: heat pen can be used with this machine

2025-11-19T07:54:13Z

heat pen can be used with this machine

← Äldre version		Versionen från 19 november 2025 kl. 07.54
Rad 22:		Rad 22:
	The Silhouette Cameo Pro MK-II is a large-format cutting machine with an expanded 24-inch cutting width, which can be fed with material on rolls as well as on adhesive mats. It is capable of cutting a wide range of materials, including vinyl, paper, cardstock, fabric, and thin leather. Additionally, a built-in cross cutter can cut roll stock for you at the end of a cutting session. Pen plotting is also possible using purpose-made or user-supplied pens.		The Silhouette Cameo Pro MK-II is a large-format cutting machine with an expanded 24-inch cutting width, which can be fed with material on rolls as well as on adhesive mats. It is capable of cutting a wide range of materials, including vinyl, paper, cardstock, fabric, and thin leather. Additionally, a built-in cross cutter can cut roll stock for you at the end of a cutting session. Pen plotting is also possible using purpose-made or user-supplied pens.

	This machine is especially suited for large jobs (> 12" in any direction) or when feeding vinyl directly from a roll. If you are going to cut or plot on thin/delicate materials like copy paper, anything rigid or too thick to be fed on rollers, or want special effects like ~~foil transfer~~ or engraving, consider using [[Cutting Machine Silhouette Curio 2\|Silhouette Curio 2]] instead.		This machine is especially suited for large jobs (> 12" in any direction) or when feeding vinyl directly from a roll. If you are going to cut or plot on thin/delicate materials like copy paper, anything rigid or too thick to be fed on rollers, or want special effects like embossing or engraving, consider using [[Cutting Machine Silhouette Curio 2\|Silhouette Curio 2]] instead.

	== Usage ==		== Usage ==
Rad 78:		Rad 78:
	* Pen Holder type C (for regular pens)		* Pen Holder type C (for regular pens)
	* Heat Pen		* Heat Pen
	* Embossing Tool

	[[Kategori:Stora Rummet]]		[[Kategori:Stora Rummet]]

Voxel den 14 oktober 2025 kl. 19.38

2025-10-14T19:38:16Z

← Äldre version		Versionen från 14 oktober 2025 kl. 19.38
Rad 3:		Rad 3:
	\| align="center" \|'''Silhouette Cameo Pro MK-II info'''		\| align="center" \|'''Silhouette Cameo Pro MK-II info'''
	\|-		\|-
	\|[[Fil:Silhouette Cameo Pro MK-II.jpg\|alt=Silhouette Cameo Pro MK-II\|~~miniatyr~~\|200x200px]]		\|[[Fil:Silhouette Cameo Pro MK-II.jpg\|alt=Silhouette Cameo Pro MK-II\|center\|200x200px]]
	\|-		\|-
	\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Usage:''' free for all		\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Usage:''' free for all

Arru: /* Tool selection */

2025-10-14T15:50:22Z

Tool selection

← Äldre version		Versionen från 14 oktober 2025 kl. 15.50
Rad 41:		Rad 41:
	=== Tool selection ===		=== Tool selection ===
	# To change tools: pull forward on tool holder's protruding tab, lift the tool upward. Insert the new tool using the same procedure, in reverse.		# To change tools: pull forward on tool holder's protruding tab, lift the tool upward. Insert the new tool using the same procedure, in reverse.
	# The ~~completely~~ white cutting tool is “auto depth” one, suitable for cutting when you are unsure of the exact settings.		# The all-white cutting tool is “auto depth” one, suitable for cutting when you are unsure of the exact settings.

	=== Software preparation ===		=== Software preparation ===

Arru den 14 oktober 2025 kl. 15.48

2025-10-14T15:48:26Z

← Äldre version		Versionen från 14 oktober 2025 kl. 15.48
Rad 22:		Rad 22:
	The Silhouette Cameo Pro MK-II is a large-format cutting machine with an expanded 24-inch cutting width, which can be fed with material on rolls as well as on adhesive mats. It is capable of cutting a wide range of materials, including vinyl, paper, cardstock, fabric, and thin leather. Additionally, a built-in cross cutter can cut roll stock for you at the end of a cutting session. Pen plotting is also possible using purpose-made or user-supplied pens.		The Silhouette Cameo Pro MK-II is a large-format cutting machine with an expanded 24-inch cutting width, which can be fed with material on rolls as well as on adhesive mats. It is capable of cutting a wide range of materials, including vinyl, paper, cardstock, fabric, and thin leather. Additionally, a built-in cross cutter can cut roll stock for you at the end of a cutting session. Pen plotting is also possible using purpose-made or user-supplied pens.

	This machine is especially suited for large jobs (> 12" in any direction) or when feeding vinyl directly from a roll. If you are going to cut thin/delicate materials like copy paper, or want special effects like foil transfer or engraving, consider using [[Cutting Machine Silhouette Curio 2\|Silhouette Curio 2]] instead.		This machine is especially suited for large jobs (> 12" in any direction) or when feeding vinyl directly from a roll. If you are going to cut or plot on thin/delicate materials like copy paper, anything rigid or too thick to be fed on rollers, or want special effects like foil transfer or engraving, consider using [[Cutting Machine Silhouette Curio 2\|Silhouette Curio 2]] instead.

	== Usage ==		== Usage ==

Arru: /* Accessories */

2025-10-14T14:59:30Z

Accessories

← Äldre version		Versionen från 14 oktober 2025 kl. 14.59
Rad 73:		Rad 73:
	== Accessories ==		== Accessories ==

	* ~~Cutting~~ mats with registration ~~grid~~		* 24" cutting mats with registration grid, light/standard/strong grip
	* Gel pens		* Gel pens
	* Pen Holder (for regular pens)
			* Pen Holder type C (for regular pens)
			* Heat Pen
			* Embossing Tool

	[[Kategori:Stora Rummet]]		[[Kategori:Stora Rummet]]

Arru: cross cutter

2025-10-14T14:56:06Z

cross cutter

← Äldre version		Versionen från 14 oktober 2025 kl. 14.56
Rad 20:		Rad 20:
	\|}		\|}

	The Silhouette Cameo Pro MK-II is a large-format cutting machine with an expanded 24-inch cutting width, which can be fed with material on rolls as well as on adhesive mats. It is capable of cutting a wide range of materials, including vinyl, paper, cardstock, fabric, and thin leather. Additionally, ~~pen~~ plotting is also possible using purpose-made or user-supplied pens.		The Silhouette Cameo Pro MK-II is a large-format cutting machine with an expanded 24-inch cutting width, which can be fed with material on rolls as well as on adhesive mats. It is capable of cutting a wide range of materials, including vinyl, paper, cardstock, fabric, and thin leather. Additionally, a built-in cross cutter can cut roll stock for you at the end of a cutting session. Pen plotting is also possible using purpose-made or user-supplied pens.

	This machine is especially suited for large jobs (> 12" in any direction) or when feeding vinyl directly from a roll. If you are going to cut thin/delicate materials like copy paper, or want special effects like foil transfer or engraving, consider using [[Cutting Machine Silhouette Curio 2\|Silhouette Curio 2]] instead.		This machine is especially suited for large jobs (> 12" in any direction) or when feeding vinyl directly from a roll. If you are going to cut thin/delicate materials like copy paper, or want special effects like foil transfer or engraving, consider using [[Cutting Machine Silhouette Curio 2\|Silhouette Curio 2]] instead.
Rad 67:		Rad 67:

	=== Unloading ===		=== Unloading ===
			''[pending cross cutter instructions]''

	Press ⌄ at the bottom of the control panel, multiple times if needed, to unload material		Press ⌄ at the bottom of the control panel, multiple times if needed, to unload material

Arru den 14 oktober 2025 kl. 14.52

2025-10-14T14:52:31Z

← Äldre version		Versionen från 14 oktober 2025 kl. 14.52
Rad 59:		Rad 59:
	# Click '''Send'''.		# Click '''Send'''.
	# Your design will now be cut / drawn / engraved		# Your design will now be cut / drawn / engraved

			=== Pausing/emergency stop ===

			* Press the ⏸️ button in the center of the control panel arrows (only lit while cutting)
			* To cancel cutting completely, find the cut job listed next to the Send button in Silhouette studio. Press close ╳ next to the cut job.
			* To resume, press ⏸️ button again

	=== Unloading ===		=== Unloading ===

Arru: bild

2025-10-14T14:47:45Z

bild

← Äldre version		Versionen från 14 oktober 2025 kl. 14.47
Rad 2:		Rad 2:
	\|-		\|-
	\| align="center" \|'''Silhouette Cameo Pro MK-II info'''		\| align="center" \|'''Silhouette Cameo Pro MK-II info'''
			\|-
			\|[[Fil:Silhouette Cameo Pro MK-II.jpg\|alt=Silhouette Cameo Pro MK-II\|miniatyr\|200x200px]]
	\|-		\|-
	\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Usage:''' free for all		\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Usage:''' free for all