Träsvarv, Solberga SVT 600 - Versionshistorik

Voxel den 20 oktober 2025 kl. 09.13

2025-10-20T09:13:16Z

← Äldre version		Versionen från 20 oktober 2025 kl. 09.13
Rad 39:		Rad 39:
	*Keep your sleeves rolled up and other loose clothing away from the moving parts of the lathe and work		*Keep your sleeves rolled up and other loose clothing away from the moving parts of the lathe and work
	*Clean up debris and dust		*Clean up debris and dust

			==Inspiration==
			<youtube>rrMofxHgRw0</youtube>

	==Handhavande av maskinen==		==Handhavande av maskinen==

Christoffer J den 14 november 2024 kl. 17.58

2024-11-14T17:58:53Z

← Äldre version		Versionen från 14 november 2024 kl. 17.58
Rad 100:		Rad 100:
	[[Kategori:Trärummet]]		[[Kategori:Trärummet]]
	[[Kategori:Trä]]		[[Kategori:Trä]]
			[[Kategori:Kunskaps- och säkerhetskrav]]

Sulan23: /* Användarinstruktioner */

2024-04-01T18:48:06Z

Användarinstruktioner

← Äldre version		Versionen från 1 april 2024 kl. 18.48
Rad 49:		Rad 49:
	===Användarinstruktioner===		===Användarinstruktioner===
	Se till att koppla in dammsugare innan du använder den!		Se till att koppla in dammsugare innan du använder den!

			To change the chuck: loosen the nut on the left side of the machine, do not unscrew the nut completely but create space between it and the machine. While holding the chuck, give the threaded rod/nut a light blow with a hammer. The chuck should now come loose and you can unscrew the nut on the left side of the machine and pull out the chuck with the thread rod.

	'''''Skriv något om hur man ställer de olika vinklarna'''''		'''''Skriv något om hur man ställer de olika vinklarna'''''

Voxel den 25 april 2023 kl. 20.36

2023-04-25T20:36:09Z

← Äldre version		Versionen från 25 april 2023 kl. 20.36
Rad 97:		Rad 97:

	[[Kategori:Trärummet]]		[[Kategori:Trärummet]]
			[[Kategori:Trä]]

Philon-: Kategori:Trärummet

2022-04-15T17:26:42Z

Kategori:Trärummet

← Äldre version		Versionen från 15 april 2022 kl. 17.26
Rad 95:		Rad 95:

	==Gallery==		==Gallery==

			[[Kategori:Trärummet]]

Cloraux: /* Generell information */

2020-11-17T22:20:36Z

Generell information

← Äldre version		Versionen från 17 november 2020 kl. 22.20
Rad 21:		Rad 21:

	==Generell information==		==Generell information==
	This lathe has an electric motor with two speeds. A lever allow to adjust the speed from 390 to 2600 RPM~~. On~~ the ~~front panel, there is an emergency switch. The current switch on~~ the ~~front panel is an ON/OFF~~ switch ~~and the motor speed can't be changed~~.		This lathe has an electric motor with two speeds. A lever allow to adjust the speed from 390 to 2600 RPM with the combination of the two speeds switch.

	There is an emergency switch in the front panel. <br />		There is an emergency switch in the front panel. <br />

Cloraux: /* Underhåll */

2020-11-13T10:48:45Z

Underhåll

← Äldre version		Versionen från 13 november 2020 kl. 10.48
Rad 70:		Rad 70:
	*TODO		*TODO
	**Built some supports on the wall for the tools		**Built some supports on the wall for the tools
			**Tailstock alignment

	===Reservdelar===		===Reservdelar===

Cloraux: /* Underhåll */

2020-11-13T10:47:25Z

Underhåll

← Äldre version		Versionen från 13 november 2020 kl. 10.47
Rad 69:		Rad 69:
	**Clean and add new grease to the spindle bearings. Clean and grease the speed mechanism.		**Clean and add new grease to the spindle bearings. Clean and grease the speed mechanism.
	*TODO		*TODO
	**Connect the lights on the lathe garde
	**Rebuild the speed mechanism and install the A48 v-belt instead of the A49 currently in.
	**Decide whether we need the engine two speed switch or only the on/off switch.
	**Built some supports on the wall for the tools		**Built some supports on the wall for the tools

Cloraux den 25 februari 2020 kl. 23.08

2020-02-25T23:08:55Z

← Äldre version		Versionen från 25 februari 2020 kl. 23.08
Rad 11:		Rad 11:
	\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Kostnad att använda:''' Gratis		\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Kostnad att använda:''' Gratis
	\|-		\|-
	\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Arbetsyta:'''		\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Arbetsyta:'''
	\|-		\|-
	\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Obelastad hastighet:''' 390-2600 RPM		\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Obelastad hastighet:''' 390-2600 RPM
Rad 21:		Rad 21:

	==Generell information==		==Generell information==
	<br />		This lathe has an electric motor with two speeds. A lever allow to adjust the speed from 390 to 2600 RPM. On the front panel, there is an emergency switch. The current switch on the front panel is an ON/OFF switch and the motor speed can't be changed.

			There is an emergency switch in the front panel. <br />
	==Säkerhetsinformation==		==Säkerhetsinformation==

	* Before starting the machine, be sure that spindle work has the cup center properly embedded, tail stock and tool rest are securely clamped and there is proper clearance for the rotating stock		*Before starting the machine, be sure that spindle work has the cup center properly embedded, tail stock and tool rest are securely clamped and there is proper clearance for the rotating stock

	* Before starting the machine for faceplate work, disengage the spindle lock and check to see that the faceplate is tight against the spindle shoulder and the tool support has proper clearance		*Before starting the machine for faceplate work, disengage the spindle lock and check to see that the faceplate is tight against the spindle shoulder and the tool support has proper clearance
	* '''Wear safety glasses and a face shield, especially when roughing out work.'''		*'''Wear safety glasses and a face shield, especially when roughing out work.'''
	* Select turning speed carefully. Large diameters must be turned at the lowest speed. Always use the lowest speed to rough out work.		*Select turning speed carefully. Large diameters must be turned at the lowest speed. Always use the lowest speed to rough out work.
	* Wood with knots and splits should not be turned. Glued up stock should cure at least 24 hours.		*Wood with knots and splits should not be turned. Glued up stock should cure at least 24 hours.
	* Keep the tool rest close to the work.		*Keep the tool rest close to the work.
	* Remove the tool rest for sanding and polishing operations. Use a scraping cut for all face plate work		*Remove the tool rest for sanding and polishing operations. Use a scraping cut for all face plate work
	* Remove both the spur and cup centers when they are not in use		*Remove both the spur and cup centers when they are not in use
	* When you stop the lathe to check your work also check and lubricate the cup center		*When you stop the lathe to check your work also check and lubricate the cup center
	* Keep the lathe tools sharp; hold them firmly and in the proper position		*Keep the lathe tools sharp; hold them firmly and in the proper position
	* Keep your sleeves rolled up and other loose clothing away from the moving parts of the lathe and work		*Keep your sleeves rolled up and other loose clothing away from the moving parts of the lathe and work
	* Clean up debris and dust		*Clean up debris and dust

	==Handhavande av maskinen==		==Handhavande av maskinen==

Cloraux den 25 februari 2020 kl. 23.01

2020-02-25T23:01:30Z

← Äldre version		Versionen från 25 februari 2020 kl. 23.01
Rad 1:		Rad 1:
	{\| style="clear: right; float: right; width: 20em; padding: 0.3em; margin: 0.5em 0 0.5em 1em; border: 1px solid #A3B1BF; background: #f5faff; text-align: left; font-size: 100%; line-height: 1.5em;"		{\| style="clear: right; float: right; width: 20em; padding: 0.3em; margin: 0.5em 0 0.5em 1em; border: 1px solid #A3B1BF; background: #f5faff; text-align: left; font-size: 100%; line-height: 1.5em;"
	\|-		\|-
	\| align="center" \|'''Snabbfakta ~~Bosch GCM8 SJL~~'''		\| align="center" \|'''Snabbfakta Solberga SVT 600'''
	\|-		\|-
	\|[[Fil:~~Bosch_GCM8_SJL~~.jpg\|~~200px~~\|~~center~~]]		\|[[Fil:Woodlathe.jpg\|alt=\|centrerad\|266x266px]]
	\|-		\|-
	\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Modell:''' ''~~Bosch GCM8 SJL~~''		\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Modell:''' ''Solberga SVT 600''
	\|-		\|-
	\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Bokningsbar:''' Nej		\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Bokningsbar:''' Nej
	\|-		\|-
	\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Kostnad att använda:''' Gratis		\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Kostnad att använda:''' Gratis
	~~\|- \|-~~
	~~\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Info 1:''' Kap- och gersåg~~
	\|-		\|-
	\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Arbetsyta:''' ~~70 x 312 mm 52°-60°~~		\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Arbetsyta:'''
	\|-		\|-
	\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Obelastad hastighet:''' ~~5500RPM~~		\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Obelastad hastighet:''' 390-2600 RPM
	\|-		\|-
	\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''~~Klingdiameter:''' 216 mm~~		\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Märkeffekt:''' -
	\|-
	~~\| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" \|'''Klinghåls-Ø~~:''' ~~30 mm~~
	\|-
	~~\| style="padding:0.1em; font~~-~~size:1.0em; background-color:#dfeff2" \|'''Märkeffekt:''' 1600W~~
	\|-		\|-

Rad 27:		Rad 21:

	==Generell information==		==Generell information==
	~~Sågen kan vinklas 52° Vänster till 60° Höger i förhållande till anhållet i bakkant (geringsvinkel)~~		<br />
			==Säkerhetsinformation==
	~~Sågen kan vinklas 47° Vänster till 2° Höger i förhållande till bordet (snedkapningsvinkel)~~


	~~This saw can be used to cut relatively large pieces of wood and is ideal to make cross-cuts. It is set for square, miter and bevel cuts, or a combination of miter and bevel cuts (compound cut).~~

	~~The saw is attached to the table with 4 screws and some angle combinations are unavailable due to the present configuration.~~

	It is ~~possible to unscrew~~ the ~~saw and move it to perform special cuts or to cut longer pieces. The saw must be set back to it's initial position.~~		* Before starting the machine, be sure that spindle work has the cup center properly embedded, tail stock and tool rest are securely clamped and there is proper clearance for the rotating stock

			* Before starting the machine for faceplate work, disengage the spindle lock and check to see that the faceplate is tight against the spindle shoulder and the tool support has proper clearance
	~~This saw can be use to perform non-through cuts (Dados~~, ~~Grooves & Rabbets) using~~ the ~~depth stop. For such operation, it's usually required~~ to ~~install a sacrificial fence (~~see ~~pictures in~~ the ~~galerie)~~		* '''Wear safety glasses and a face shield, especially when roughing out work.'''
	~~==Säkerhetsinformation==~~		* Select turning speed carefully. Large diameters must be turned at the lowest speed. Always use the lowest speed to rough out work.
			* Wood with knots and splits should not be turned. Glued up stock should cure at least 24 hours.
	*~~Keep hands~~ at least ~~15 cm from~~ the ~~blade~~		* Keep the tool rest close to the work.
	*~~Wear safety glasses~~ and ~~hearing protection~~		* Remove the tool rest for sanding and polishing operations. Use a scraping cut for all face plate work
	*~~Keep~~ the ~~blade guard~~ in ~~position at all times~~		* Remove both the spur and cup centers when they are not in use
	*~~Hold stock firmly on~~ the ~~table~~ and ~~against~~ the ~~fence~~		* When you stop the lathe to check your work also check and lubricate the cup center
	*~~After making~~ the ~~cut but before raising~~ the ~~saw make sure that the blade has come to a complete stop.~~		* Keep the lathe tools sharp; hold them firmly and in the proper position
	*~~When making multiple cuts~~ of ~~various angles do not move hands under~~ the ~~blade whether it is moving or not~~		* Keep your sleeves rolled up and other loose clothing away from the moving parts of the lathe and work
	*~~Sweep the workstation~~ and ~~the floor. All scrap goes in the scrap bin.~~		* Clean up debris and dust

	==Handhavande av maskinen==		==Handhavande av maskinen==
	===Manual===		===Manual===

	~~[https:~~/~~/www.bosch-professional.com/binary/ocsmedia/optimized/full/o290859v21_160992A4D3_201808.pdf Manual på Boschs hemsida]~~		<br />

	===Material===		===Material===
	Endast för trä!		Endast för trä! Wooden with epoxy can also be turned if the epoxy is fully cured.

	~~Some plastics~~ can be ~~cut using this saw, but you need to use your own dedicated blade. Always disconnect the power before changing the blade and make sure it's properly centered before starting~~ the ~~saw~~.
	===Användarinstruktioner===		===Användarinstruktioner===
	Se till att koppla in dammsugare innan du använder den!		Se till att koppla in dammsugare innan du använder den!
Rad 65:		Rad 51:

	==Förbrukningsmaterial==		==Förbrukningsmaterial==
	~~We currently have XX spare blades for the miter saw. These blade can be resharpened, do not throw them away, instead label them as "DULL".~~		<br />

	~~The blades provided by the makerspace are for general purpose and designed for cross-cutting and have about XX teeth.~~

	~~You can buy and install your own blade for some specific projects (cutting plastics, Flat kerf blades for joinery, etc) but you must install back the original blade when you are done.~~

	~~Klingdiameter: 216 mm~~

	~~Klinghåls-Ø: 30 mm~~

	==Underhåll och reservdelar==		==Underhåll och reservdelar==
Rad 87:		Rad 65:
	**Run the lathe and operate it over the full speed range. Dust can over time built up and reduce the range of speed. If it happens, disassemble the speed mechanism and clean it with wire brush and add new grease.		**Run the lathe and operate it over the full speed range. Dust can over time built up and reduce the range of speed. If it happens, disassemble the speed mechanism and clean it with wire brush and add new grease.
	*Annually		*Annually
	**Clean and add new grease to the spindle bearings. Clean and grease the speed mechanism.		**Clean and add new grease to the spindle bearings. Clean and grease the speed mechanism.
	* TODO		*TODO
	** Connect the lights on the lathe garde		**Connect the lights on the lathe garde
	** Rebuild the speed mechanism and install the A48 v-belt instead of the A49 currently in.		**Rebuild the speed mechanism and install the A48 v-belt instead of the A49 currently in.
	** Decide whether we need the engine two speed switch or only the on/off switch.		**Decide whether we need the engine two speed switch or only the on/off switch.
	** Built some supports on the wall for the tools		**Built some supports on the wall for the tools

	===Reservdelar===		===Reservdelar===