Wall of shame - Versionshistorik

Rasmus Landhall: namn*

2026-05-07T13:36:22Z

namn*

← Äldre version		Versionen från 7 maj 2026 kl. 13.36
Rad 68:		Rad 68:
	==Big Room and bigger problems==		==Big Room and bigger problems==

	=== ~~<u>~~What You Can't ~~Sense~~ Can ~~Still~~ Hurt You~~</u>~~ ===		=== What You Can't See, ''Can'' Hurt You ===
	Today, Kevin wanted to engrave some galvanized steel on the xTool F2 Ultra. He figured it would be fine. He couldn't smell anything, so how bad could it be?		Today, Kevin wanted to engrave some galvanized steel on the xTool F2 Ultra. He figured it would be fine. He couldn't smell anything, so how bad could it be?

Rasmus Landhall: länk, https://en.wikipedia.org/wiki/Metal_fume_fever

2026-05-07T13:34:42Z

länk, https://en.wikipedia.org/wiki/Metal_fume_fever

← Äldre version		Versionen från 7 maj 2026 kl. 13.34
Rad 73:		Rad 73:
	Pretty bad, it turns out. Galvanized steel has a zinc coating that releases zinc oxide fumes when heated.		Pretty bad, it turns out. Galvanized steel has a zinc coating that releases zinc oxide fumes when heated.

	Zinc oxide fume fever is a real thing and gives you (and the people around you) flu-like symptoms that hits you hours after exposure, long after you've left the space. Your nose won't warn you in time, or at all.		[https://en.wikipedia.org/wiki/Metal_fume_fever Zinc oxide fume fever] is a real thing and gives you (and the people around you) flu-like symptoms that hits you hours after exposure, long after you've left the space. Your nose won't warn you in time, or at all.

	This is also a good moment to think about the IR laser on the F2 Ultra too. You can't see the beam, it's infrared. That doesn't mean it isn't there, and it doesn't mean it can't blind you or burn you instantly. Invisible is not the same as safe. The rule is simple: if you're not sure a material is safe to laser, check the material list on the wiki before you start. When in doubt, ask. Don't be like Kevin, your senses are not a substitute for knowing what you're working with.		This is also a good moment to think about the IR laser on the F2 Ultra too. You can't see the beam, it's infrared. That doesn't mean it isn't there, and it doesn't mean it can't blind you or burn you instantly. Invisible is not the same as safe. The rule is simple: if you're not sure a material is safe to laser, check the material list on the wiki before you start. When in doubt, ask. Don't be like Kevin, your senses are not a substitute for knowing what you're working with.

Rasmus Landhall: Laser incident

2026-05-07T13:28:42Z

Laser incident

← Äldre version		Versionen från 7 maj 2026 kl. 13.28
Rad 65:		Rad 65:
	These blades are very expensive (~1500SEK each), and last a really long time if you use the right blade, mount them the right way around and do not feed with excessive force.		These blades are very expensive (~1500SEK each), and last a really long time if you use the right blade, mount them the right way around and do not feed with excessive force.
	[[Fil:Backwards sawblade.jpg\|ingen\|miniatyr\|Running the metal chop saw with a blade mounted backwards or not fastened properly is a surefire way of removing teeth from a expensive blade.]]		[[Fil:Backwards sawblade.jpg\|ingen\|miniatyr\|Running the metal chop saw with a blade mounted backwards or not fastened properly is a surefire way of removing teeth from a expensive blade.]]

			==Big Room and bigger problems==

			=== <u>What You Can't Sense Can Still Hurt You</u> ===
			Today, Kevin wanted to engrave some galvanized steel on the xTool F2 Ultra. He figured it would be fine. He couldn't smell anything, so how bad could it be?

			Pretty bad, it turns out. Galvanized steel has a zinc coating that releases zinc oxide fumes when heated.

			Zinc oxide fume fever is a real thing and gives you (and the people around you) flu-like symptoms that hits you hours after exposure, long after you've left the space. Your nose won't warn you in time, or at all.

			This is also a good moment to think about the IR laser on the F2 Ultra too. You can't see the beam, it's infrared. That doesn't mean it isn't there, and it doesn't mean it can't blind you or burn you instantly. Invisible is not the same as safe. The rule is simple: if you're not sure a material is safe to laser, check the material list on the wiki before you start. When in doubt, ask. Don't be like Kevin, your senses are not a substitute for knowing what you're working with.

Voxel den 1 juli 2025 kl. 15.49

2025-07-01T15:49:24Z

← Äldre version		Versionen från 1 juli 2025 kl. 15.49
Rad 16:		Rad 16:

	Also Kevin uses 115mm discs on this 125mm pad and press down like crazy. It just destroys the sides of the pads and discs won't stick.		Also Kevin uses 115mm discs on this 125mm pad and press down like crazy. It just destroys the sides of the pads and discs won't stick.
	[[Fil:Kevin 1.jpg\|miniatyr\|alt=\|Don't be like Kevin, vacuum the dust!~~\|ingen~~]]		[[Fil:Kevin 1.jpg\|miniatyr\|alt=\|ingen\|Don't be like Kevin, vacuum the dust!]]
	===The Thin Red Line===		===The Thin Red Line===
	Today, Kevin used the jointer/planer - the machine that creates the most wood chips - and quickly filled up the vacuum bag. And Kevin didn't check the level in the bag even though there's a transparent window with a thin red line and the text "MAX". As a result it filled up the space between the bag and the filter (about 25 cm) and it took two members about 1 hour to clean.		Today, Kevin used the jointer/planer - the machine that creates the most wood chips - and quickly filled up the vacuum bag. And Kevin didn't check the level in the bag even though there's a transparent window with a thin red line and the text "MAX". As a result it filled up the space between the bag and the filter (about 25 cm) and it took two members about 1 hour to clean.

	Also Kevin planed some wet would. Humidity can clog up the filter.		Also Kevin planed some wet would. Humidity can clog up the filter.
	[[Fil:Kevin 2.jpg\|miniatyr\|Don't be like Kevin, check the thin red line!~~\|alt=\|ingen~~]]		[[Fil:Kevin 2.jpg\|miniatyr\|alt=\|ingen\|Don't be like Kevin, check the thin red line!]]
	===We Will Rock You===		===We Will Rock You===
	Today, Kevin had some lightweight limestone bricks to cut. Instead of using an appropriate cutting disc on an angle grinder, he thought it would be easier to use the table saw. Kevin should have asked first. As a result, Kevin quickly wore the blade and literately covered the table saw gears and the room with a fine abrasive white dust.		Today, Kevin had some lightweight limestone bricks to cut. Instead of using an appropriate cutting disc on an angle grinder, he thought it would be easier to use the table saw. Kevin should have asked first. As a result, Kevin quickly wore the blade and literately covered the table saw gears and the room with a fine abrasive white dust.
	[[Fil:Kevin 3.jpg\|miniatyr\|Don't be like Kevin, don't bring any kind of stone in the woodshop!~~\|alt=\|ingen~~]]		[[Fil:Kevin 3.jpg\|miniatyr\|alt=\|ingen\|Don't be like Kevin, don't bring any kind of stone in the woodshop!]]
	===What Are You Waiting For?===		===What Are You Waiting For?===
	Yes Kevin, here is your punishment for not emptying the trash, a song title by Nickelback!		Yes Kevin, here is your punishment for not emptying the trash, a song title by Nickelback!

	I know taking the trash out when you just put a few pieces of wood is not fair but that's how it works. But leaving it like this for the next member is also not fair.[[Fil:Kevin 4.jpg\|miniatyr\|Don't be like Kevin, empty the trash when it's full!~~\|alt=\|ingen~~]]		I know taking the trash out when you just put a few pieces of wood is not fair but that's how it works. But leaving it like this for the next member is also not fair.[[Fil:Kevin 4.jpg\|miniatyr\|alt=\|ingen\|Don't be like Kevin, empty the trash when it's full!]]

	===Dust in the wind===		===Dust in the wind===

Erik Cederberg: /* Another spin on the saw */

2020-03-01T12:37:35Z

Another spin on the saw

← Äldre version		Versionen från 1 mars 2020 kl. 12.37
Rad 62:		Rad 62:
	Not satisfied with the result, it did cut terribly slow, he pushed harder and harder to get through the aluminium piece, managed to get trough and left it at that.		Not satisfied with the result, it did cut terribly slow, he pushed harder and harder to get through the aluminium piece, managed to get trough and left it at that.

	Running the chop saw with the blade backwards, and/or pushing it down with excessive force, ~~will result~~ in damage to the saw.		Running the chop saw with the blade backwards, and/or pushing it down with excessive force, results in damage to the saw blades.
	These blades are ~~quite~~ expensive (~1500SEK each), and last a long time if you use the right blade, mount them the right way around and do not feed with excessive force.		These blades are very expensive (~1500SEK each), and last a really long time if you use the right blade, mount them the right way around and do not feed with excessive force.
	[[Fil:Backwards sawblade.jpg\|ingen\|miniatyr\|Running the metal chop saw with a blade mounted backwards or not fastened properly is a surefire way of removing teeth from a expensive blade.]]		[[Fil:Backwards sawblade.jpg\|ingen\|miniatyr\|Running the metal chop saw with a blade mounted backwards or not fastened properly is a surefire way of removing teeth from a expensive blade.]]

Erik Cederberg den 1 mars 2020 kl. 12.36

2020-03-01T12:36:01Z

← Äldre version		Versionen från 1 mars 2020 kl. 12.36
Rad 8:		Rad 8:
	Kevin might have different profils. He can be a new excited member that didn't take the time to read the wiki, he can be an relatively advanced user that believes he knows everything (but actually doesn't), he can also be an long-term makerspace member that believes rules do not apply to him anymore. Kevin also has little time to spend on his project, thus neglect the time he should invest in cleaning after himself.		Kevin might have different profils. He can be a new excited member that didn't take the time to read the wiki, he can be an relatively advanced user that believes he knows everything (but actually doesn't), he can also be an long-term makerspace member that believes rules do not apply to him anymore. Kevin also has little time to spend on his project, thus neglect the time he should invest in cleaning after himself.

	== Worst of the Woodshop ==		==Worst of the Woodshop==

	===Another One Bits The Dust===		===Another One Bits The Dust===
Rad 42:		Rad 42:
	[[Fil:Kevin 5.jpg\|ingen\|miniatyr\|Don't be like Kevin, don't bring carcinogenic wood!]]<br />		[[Fil:Kevin 5.jpg\|ingen\|miniatyr\|Don't be like Kevin, don't bring carcinogenic wood!]]<br />

	== Metal workshop mishaps ==		==Metal workshop mishaps==

	=== Turning turns to trouble ===		===Turning turns to trouble===
	This time, Kevin wanted to use a lathe to turn some wooden pieces, and then he thought "what better place to do so than in the Metal workshop?"		This time, Kevin wanted to use a lathe to turn some wooden pieces, and then he thought "what better place to do so than in the Metal workshop?"

	Wood dust does not mix well with the oiled ways and bearings of metal working machines (or you could say that it mixes too well) turning way oil from lubrication to a sticky glue-like mess.		Wood dust does not mix well with the oiled ways and bearings of metal working machines (or you could say that it mixes too well) turning all the way oil from lubrication to a sticky glue-like mess that requires a thorough cleaning and re-oiling.
	The same goes the other way, the possible heat and sparks of metalworking does not mix well with flammable wood dust.		The same goes the other way, the possible heat and sparks of metalworking does not mix well with flammable wood dust.

Rad 55:		Rad 55:
	<br />		<br />

	=== ~~Rubrik~~ ===		===Another spin on the saw===
	~~Beskrivning~~		While working on his project, Kevin needed to cut some metal. He knew that depending on what metal he was to cut in the chop saw, he should use different blades, and he was to cut Aluminium. So far so good.
			He removed the steel blade from the saw and put it back on the wall, and took down the aluminium blade and mounted it. Still good.

			What he didn't check was the large arrows that shows what direction the blade is supposed to spin, so he fitted it backwards and then tried to saw his metal piece.
			Not satisfied with the result, it did cut terribly slow, he pushed harder and harder to get through the aluminium piece, managed to get trough and left it at that.

			Running the chop saw with the blade backwards, and/or pushing it down with excessive force, will result in damage to the saw.
			These blades are quite expensive (~1500SEK each), and last a long time if you use the right blade, mount them the right way around and do not feed with excessive force.
	[[Fil:Backwards sawblade.jpg\|ingen\|miniatyr\|Running the metal chop saw with a blade mounted backwards or not fastened properly is a surefire way of removing teeth from a expensive blade.]]		[[Fil:Backwards sawblade.jpg\|ingen\|miniatyr\|Running the metal chop saw with a blade mounted backwards or not fastened properly is a surefire way of removing teeth from a expensive blade.]]

Erik Cederberg den 29 februari 2020 kl. 22.46

2020-02-29T22:46:46Z

← Äldre version		Versionen från 29 februari 2020 kl. 22.46
Rad 1:		Rad 1:
	This page exhibit some mistakes and inappropriate behavior that happened in the ~~woodshop~~. The goal is not to point the finger at anybody but to raise awareness.		This page exhibit some mistakes and inappropriate behavior that happened in the makerspace. The goal is not to point the finger at anybody but to raise awareness.
	Making an ~~mistakes~~ is ok as long as you realize it and learn from it.		Making an mistake is ok as long as you realize it and learn from it.
	Safety rules and proper handling of the machines as described in this wiki are there to protect you and the tools so that everyone can enjoy the space.		Safety rules and proper handling of the machines as described in this wiki are there to protect you and the tools so that everyone can enjoy the space.

Rad 8:		Rad 8:
	Kevin might have different profils. He can be a new excited member that didn't take the time to read the wiki, he can be an relatively advanced user that believes he knows everything (but actually doesn't), he can also be an long-term makerspace member that believes rules do not apply to him anymore. Kevin also has little time to spend on his project, thus neglect the time he should invest in cleaning after himself.		Kevin might have different profils. He can be a new excited member that didn't take the time to read the wiki, he can be an relatively advanced user that believes he knows everything (but actually doesn't), he can also be an long-term makerspace member that believes rules do not apply to him anymore. Kevin also has little time to spend on his project, thus neglect the time he should invest in cleaning after himself.

	==Another One Bits The Dust==		== Worst of the Woodshop ==

			===Another One Bits The Dust===
	Today, Kevin spent a lot of time sanding a lot of wood. It took him all day and a lot of sanding discs. But he now has a nice a smooth piece of wood. Unfortunately Kevin didn't spend his last 2 minutes cleaning and putting back the orbital sander in his box.		Today, Kevin spent a lot of time sanding a lot of wood. It took him all day and a lot of sanding discs. But he now has a nice a smooth piece of wood. Unfortunately Kevin didn't spend his last 2 minutes cleaning and putting back the orbital sander in his box.

Rad 15:		Rad 17:
	Also Kevin uses 115mm discs on this 125mm pad and press down like crazy. It just destroys the sides of the pads and discs won't stick.		Also Kevin uses 115mm discs on this 125mm pad and press down like crazy. It just destroys the sides of the pads and discs won't stick.
	[[Fil:Kevin 1.jpg\|miniatyr\|alt=\|Don't be like Kevin, vacuum the dust!\|ingen]]		[[Fil:Kevin 1.jpg\|miniatyr\|alt=\|Don't be like Kevin, vacuum the dust!\|ingen]]
	==The Thin Red Line==		===The Thin Red Line===
	Today, Kevin used the jointer/planer - the machine that creates the most wood chips - and quickly filled up the vacuum bag. And Kevin didn't check the level in the bag even though there's a transparent window with a thin red line and the text "MAX". As a result it filled up the space between the bag and the filter (about 25 cm) and it took two members about 1 hour to clean.		Today, Kevin used the jointer/planer - the machine that creates the most wood chips - and quickly filled up the vacuum bag. And Kevin didn't check the level in the bag even though there's a transparent window with a thin red line and the text "MAX". As a result it filled up the space between the bag and the filter (about 25 cm) and it took two members about 1 hour to clean.

	Also Kevin planed some wet would. Humidity can clog up the filter.		Also Kevin planed some wet would. Humidity can clog up the filter.
	[[Fil:Kevin 2.jpg\|miniatyr\|Don't be like Kevin, check the thin red line!\|alt=\|ingen]]		[[Fil:Kevin 2.jpg\|miniatyr\|Don't be like Kevin, check the thin red line!\|alt=\|ingen]]
	==We Will Rock You==		===We Will Rock You===
	Today, Kevin had some lightweight limestone bricks to cut. Instead of using an appropriate cutting disc on an angle grinder, he thought it would be easier to use the table saw. Kevin should have asked first. As a result, Kevin quickly wore the blade and literately covered the table saw gears and the room with a fine abrasive white dust.		Today, Kevin had some lightweight limestone bricks to cut. Instead of using an appropriate cutting disc on an angle grinder, he thought it would be easier to use the table saw. Kevin should have asked first. As a result, Kevin quickly wore the blade and literately covered the table saw gears and the room with a fine abrasive white dust.
	[[Fil:Kevin 3.jpg\|miniatyr\|Don't be like Kevin, don't bring any kind of stone in the woodshop!\|alt=\|ingen]]		[[Fil:Kevin 3.jpg\|miniatyr\|Don't be like Kevin, don't bring any kind of stone in the woodshop!\|alt=\|ingen]]
	==What Are You Waiting For?==		===What Are You Waiting For?===
	Yes Kevin, here is your punishment for not emptying the trash, a song title by Nickelback!		Yes Kevin, here is your punishment for not emptying the trash, a song title by Nickelback!

	I know taking the trash out when you just put a few pieces of wood is not fair but that's how it works. But leaving it like this for the next member is also not fair.[[Fil:Kevin 4.jpg\|miniatyr\|Don't be like Kevin, empty the trash when it's full!\|alt=\|ingen]]		I know taking the trash out when you just put a few pieces of wood is not fair but that's how it works. But leaving it like this for the next member is also not fair.[[Fil:Kevin 4.jpg\|miniatyr\|Don't be like Kevin, empty the trash when it's full!\|alt=\|ingen]]

	==Dust in the wind==		===Dust in the wind===
	Today, Kevin heavily used the belt sander. If only he would have spend 1 minute of his time cleaning his mess.		Today, Kevin heavily used the belt sander. If only he would have spend 1 minute of his time cleaning his mess.

Rad 34:		Rad 36:
	[[Fil:Kevin 6.jpg\|ingen\|miniatyr\|Don't be like Kevin, connect the vacuum to the belt sander!]]		[[Fil:Kevin 6.jpg\|ingen\|miniatyr\|Don't be like Kevin, connect the vacuum to the belt sander!]]

	==Every Breath You Take==		===Every Breath You Take===
	Will slowly kill you. Today Kevin found an old telephone post. That would be awesome if only this stuff was not stuffed with dirty chemicals. The smell in the woodshop after one day should have give you a hint.		Will slowly kill you. Today Kevin found an old telephone post. That would be awesome if only this stuff was not stuffed with dirty chemicals. The smell in the woodshop after one day should have give you a hint.

	Instead you cut some pieces and spread deadly dust all around. Hopefully someone threw it away and Kevin acknowledge his honest mistake.		Instead you cut some pieces and spread deadly dust all around. Hopefully someone threw it away and Kevin acknowledge his honest mistake.
	[[Fil:Kevin 5.jpg\|ingen\|miniatyr\|Don't be like Kevin, don't bring carcinogenic wood!]]		[[Fil:Kevin 5.jpg\|ingen\|miniatyr\|Don't be like Kevin, don't bring carcinogenic wood!]]<br />

			== Metal workshop mishaps ==

			=== Turning turns to trouble ===
			This time, Kevin wanted to use a lathe to turn some wooden pieces, and then he thought "what better place to do so than in the Metal workshop?"

			Wood dust does not mix well with the oiled ways and bearings of metal working machines (or you could say that it mixes too well) turning way oil from lubrication to a sticky glue-like mess.
			The same goes the other way, the possible heat and sparks of metalworking does not mix well with flammable wood dust.

			Keeping these two practices separated is mandatory, it is both safer and it makes our tools last way longer.
			Also make sure that the door between the wood workshop and the metal workshop is closed as soon as any work is going on.
			[[Fil:Wood dust in the lathe.jpg\|ingen\|miniatyr\|Using '''wood''' in the '''metal''' lathe is '''not''' allowed. The wood dust turns all the oil on the ways and bearings to a sticky mess. There is a wood lathe if you want to work with wood, '''in the Woodroom''']]
	<br />		<br />

			=== Rubrik ===
			Beskrivning
			[[Fil:Backwards sawblade.jpg\|ingen\|miniatyr\|Running the metal chop saw with a blade mounted backwards or not fastened properly is a surefire way of removing teeth from a expensive blade.]]

Cloraux: /* What Are You Waiting For? */

2020-02-29T16:49:27Z

What Are You Waiting For?

← Äldre version		Versionen från 29 februari 2020 kl. 16.49
Rad 26:		Rad 26:
	Yes Kevin, here is your punishment for not emptying the trash, a song title by Nickelback!		Yes Kevin, here is your punishment for not emptying the trash, a song title by Nickelback!

	I know taking the trash out when you just put a few pieces of wood is not fair but that's how it works. But leaving it like this for the next member is also not fair.[[Fil:Kevin 4.jpg\|miniatyr\|Don't be like Kevin, empty the ~~thrash~~ when it's full!\|alt=\|ingen]]		I know taking the trash out when you just put a few pieces of wood is not fair but that's how it works. But leaving it like this for the next member is also not fair.[[Fil:Kevin 4.jpg\|miniatyr\|Don't be like Kevin, empty the trash when it's full!\|alt=\|ingen]]

	== Dust in the wind ==		==Dust in the wind==
	Today, Kevin heavily used the belt sander. If only he would have spend 1 minute of his time cleaning his mess.		Today, Kevin heavily used the belt sander. If only he would have spend 1 minute of his time cleaning his mess.

Rad 34:		Rad 34:
	[[Fil:Kevin 6.jpg\|ingen\|miniatyr\|Don't be like Kevin, connect the vacuum to the belt sander!]]		[[Fil:Kevin 6.jpg\|ingen\|miniatyr\|Don't be like Kevin, connect the vacuum to the belt sander!]]

	== Every Breath You Take ==		==Every Breath You Take==
	Will slowly kill you. Today Kevin found an old telephone post. That would be awesome if only this stuff was not stuffed with dirty chemicals. The smell in the woodshop after one day should have give you a hint.		Will slowly kill you. Today Kevin found an old telephone post. That would be awesome if only this stuff was not stuffed with dirty chemicals. The smell in the woodshop after one day should have give you a hint.

Cloraux den 29 februari 2020 kl. 16.48

2020-02-29T16:48:03Z

← Äldre version		Versionen från 29 februari 2020 kl. 16.48
Rad 27:		Rad 27:

	I know taking the trash out when you just put a few pieces of wood is not fair but that's how it works. But leaving it like this for the next member is also not fair.[[Fil:Kevin 4.jpg\|miniatyr\|Don't be like Kevin, empty the thrash when it's full!\|alt=\|ingen]]		I know taking the trash out when you just put a few pieces of wood is not fair but that's how it works. But leaving it like this for the next member is also not fair.[[Fil:Kevin 4.jpg\|miniatyr\|Don't be like Kevin, empty the thrash when it's full!\|alt=\|ingen]]

			== Dust in the wind ==
			Today, Kevin heavily used the belt sander. If only he would have spend 1 minute of his time cleaning his mess.

			Also if you connect the vacuum, you have much less to clean afterwards and you don't fill the room with dust!
			[[Fil:Kevin 6.jpg\|ingen\|miniatyr\|Don't be like Kevin, connect the vacuum to the belt sander!]]

			== Every Breath You Take ==
			Will slowly kill you. Today Kevin found an old telephone post. That would be awesome if only this stuff was not stuffed with dirty chemicals. The smell in the woodshop after one day should have give you a hint.

			Instead you cut some pieces and spread deadly dust all around. Hopefully someone threw it away and Kevin acknowledge his honest mistake.
			[[Fil:Kevin 5.jpg\|ingen\|miniatyr\|Don't be like Kevin, don't bring carcinogenic wood!]]
			<br />

Cloraux den 29 februari 2020 kl. 16.21

2020-02-29T16:21:04Z

← Äldre version		Versionen från 29 februari 2020 kl. 16.21
Rad 5:		Rad 5:
	Remember that if you have any question or need help on a project, you'll always find someone.		Remember that if you have any question or need help on a project, you'll always find someone.

	Now let's take a walk along the wall of shame with our member Kevin (purely randomly chosen name)		Now let's take a walk along the wall of shame with our member Kevin (purely randomly chosen name).
	Kevin might have different ~~profil~~. He can be a new excited member that didn't take the time to read the wiki, he can be an relatively advanced user that believes he knows everything (but actually doesn't), he can also be an long-term makerspace member that believes rules do not apply to him anymore. Kevin also has little time to spend on his project, thus neglect the time he should invest in cleaning after himself.		Kevin might have different profils. He can be a new excited member that didn't take the time to read the wiki, he can be an relatively advanced user that believes he knows everything (but actually doesn't), he can also be an long-term makerspace member that believes rules do not apply to him anymore. Kevin also has little time to spend on his project, thus neglect the time he should invest in cleaning after himself.
	~~<br />~~


	==Another One Bits The Dust==		==Another One Bits The Dust==