433
redigeringar
Resin Printing: Skillnad mellan sidversioner
ingen redigeringssammanfattning
(Ändrat formulering om support) |
Daniel (diskussion | bidrag) Ingen redigeringssammanfattning |
||
| (7 mellanliggande sidversioner av 4 användare visas inte) | |||
| Rad 1: | Rad 1: | ||
This is a draft for training material for | This is a draft for training material for resin printing at the makerspace. | ||
===What is SLA-printing=== | ===What is SLA-printing=== | ||
| Rad 18: | Rad 18: | ||
=====Support:===== | =====Support:===== | ||
Auto support does some things automatically but you may do some manual adjustment of: | Auto support does some things automatically but you may need to do some manual adjustment of: | ||
*Minimas | *Minimas | ||
*local minimas, | *local minimas, | ||
*Alternate support along edges. | *Alternate support along edges. | ||
*" | *Support density that needs to be "enough" to resist the suction forces of the layer separation and gravity. | ||
=====Model management===== | =====Model management===== | ||
| Rad 67: | Rad 67: | ||
*Wipe the printer and the work-surfaces with IPA, throw the ragg away. | *Wipe the printer and the work-surfaces with IPA, throw the ragg away. | ||
*If something seems to have broken off the model: Filter the resin! <br /> | *If something seems to have broken off the model: Filter the resin! <br /> | ||
===The things i filmed=== | |||
Here is an album with the various things I filmed.. It needs to be cut and made into proper instructional videos. | |||
https://photos.app.goo.gl/xnDX69vvJ3vtqjoa7 | |||