440
redigeringar
Resin Printing: Skillnad mellan sidversioner
ingen redigeringssammanfattning
m (Återställde redigeringar av Christoffer J (användardiskussion) till senaste versionen av Zinob) Märke: Tillbakarullning |
Daniel (diskussion | bidrag) Ingen redigeringssammanfattning |
||
| (6 mellanliggande sidversioner av 4 användare visas inte) | |||
| Rad 1: | Rad 1: | ||
This is a draft for training material for | This is a draft for training material for resin printing at the makerspace. | ||
This page is outdated because it was for our old printer. | |||
===What is SLA-printing=== | ===What is SLA-printing=== | ||
| Rad 5: | Rad 7: | ||
===Risks and security precautions=== | ===Risks and security precautions=== | ||
* Resin is mildly toxic and an allergen. | *Resin is mildly toxic and an allergen. | ||
* Use glasses, <u>nitril</u> gloves and only touch things inside the cabinet as soon as you have started working. | *Use glasses, <u>nitril</u> gloves and only touch things inside the cabinet as soon as you have started working. | ||
* Wash your hands after you have removed the gloves. only Use soap and water, never use IPA or acetone to wash your skin since it does remove most of the resin it helps the rest of it penetrating deeper. | *Wash your hands after you have removed the gloves. only Use soap and water, never use IPA or acetone to wash your skin since it does remove most of the resin it helps the rest of it penetrating deeper. | ||
* Lift bottles with your hand over the label | *Lift bottles with your hand over the label | ||
===Slicing your files=== | ===Slicing your files=== | ||
| Rad 18: | Rad 20: | ||
=====Support:===== | =====Support:===== | ||
Auto support does some | Auto support does some things automatically but you may need to do some manual adjustment of: | ||
*Minimas | *Minimas | ||
*local minimas, | *local minimas, | ||
*Alternate support along edges. | *Alternate support along edges. | ||
*" | *Support density that needs to be "enough" to resist the suction forces of the layer separation and gravity. | ||
=====Model management===== | =====Model management===== | ||
| Rad 67: | Rad 69: | ||
*Wipe the printer and the work-surfaces with IPA, throw the ragg away. | *Wipe the printer and the work-surfaces with IPA, throw the ragg away. | ||
*If something seems to have broken off the model: Filter the resin! <br /> | *If something seems to have broken off the model: Filter the resin! <br /> | ||
===The things i filmed=== | |||
Here is an album with the various things I filmed.. It needs to be cut and made into proper instructional videos. | |||
https://photos.app.goo.gl/xnDX69vvJ3vtqjoa7 | |||