Table router, Triton TRA001

Snabbfakta Triton TRA001

Modell: Triton TRA001

Bokningsbar: Nej

Kostnad att använda: Gratis

Märkeffekt: 2400W

Handhavande av maskinen

Material

For wood and some plastics only.

Do not ever use metal, even as a template.

Usage instructions

Make sure to attach the extraction system before using the router.

You can raise or lower the bit using a crank usually found in the storage below the table. It fits in a hole in the table, and reaches to a ball head with a nail through it on the router.

Replacing the bit

First, flip the switch off. Even with the machine unplugged, it’s necessary to disengage a safety mechanism. You need to push the power switch cover fully open, flip the switch and let the cover close completely.

Then, remove the red protective plate, unlocking it with the grey plastic tool.

Then, using the crank, raise the bit to its highest position. Turning the chuck, you should hear a click when the spindle lock engages.

Once in this position, unlock the bit using the black flat wrench. If the new bit has a shank of a different size, unscrew the chuck completely and replace it with one the proper size.

Place the new bit, tighten it with the wrench, lower it, and place back the red protective plate (using the smallest hole that would fit over the bit).

Put away the tools, flip the switch back on, and you’re good to go!

Underhåll och reservdelar

Underhåll

• Daily

• Monthly

Reservdelar

We do not have spare parts for this machine.

Ägare

Maskinen inköpt av Makerspace