HP Designjet 800: Skillnad mellan sidversioner
Voxel (diskussion | bidrag) Ingen redigeringssammanfattning |
Voxel (diskussion | bidrag) (Added section about margins) |
||
| Rad 34: | Rad 34: | ||
==Generell information== | ==Generell information== | ||
Skrivare för papper. Normalt sett laddad med papper på rulle 90 eller 180 g/m2. Kan användas från särskild dator i lokalen som har programvara och inställningar klara. | Skrivare för papper. Normalt sett laddad med papper på rulle 90 eller 180 g/m2. Kan användas från särskild dator i lokalen som har programvara och inställningar klara. | ||
==Introduktionfilm== | |||
Finns på vår Youtube-kanal: https://www.youtube.com/watch?v=MSjOrS03lEM | |||
==Color Profile== | ==Color Profile== | ||
| Rad 56: | Rad 59: | ||
# Open the PDF in in HP Instant Printing and print from there. | # Open the PDF in in HP Instant Printing and print from there. | ||
== | ==Borders and margins== | ||
The printer will not print to the edge of the paper. It will always leave 5.5mm on both the left and the right side, 17mm on the back edge, and 18.5mm on the front edge. | |||
For the most consistent results, use a pdf that has the same width (and height unless printing from a roll) as your paper. And in the HP Instant Printing application, make sure the '''Clip content by margins option is selected'''. Then you can manually make sure that your content has appropriate margins in your design document. | |||
==Handhavande av maskinen== | ==Handhavande av maskinen== | ||
Versionen från 14 juli 2022 kl. 14.38
| Snabbfakta HP Designjet 800 |
 |
| Modell: HP Designjet 800 |
| Bokningsbar: Nej |
| Kostnad att använda: Ja, 25-65kr/meter |
| Färger: 4-färgs bläckstråleskrivare, svart, cyan, magenta, gul |
| Arbetsyta: 1066 mm bredd, papper på rulle. Max 42m utskrift. |
| Anslutning: Paralell, USB typ B, Nätverk 10/100 BASE TX |
| Utskriftsteknik: HP Thermal Inkjet |
| Upplösning: 2400 x 1200 dpi |
| Utskriftshastighet: 60 sek för line-drawing. |
| Maskinens bredd 172 cm |
| Maskinens vikt 45 kg |
Generell information
Skrivare för papper. Normalt sett laddad med papper på rulle 90 eller 180 g/m2. Kan användas från särskild dator i lokalen som har programvara och inställningar klara.
Introduktionfilm
Finns på vår Youtube-kanal: https://www.youtube.com/watch?v=MSjOrS03lEM
Color Profile
To get the best color output from the printer you should use a color profile.
To install the calibrated color profile for our printer, follow these steps:
- On makerspace computers, the profile may already be installed.
- Download the profile from here: icc color profile.
- Open the folder with the profile, right click on it and select "Install Profile".
- Restart the program you were using for design (e.g. Illustrator, Inkscape, etc.)
As usual you need to print your file using the HP Instant Printing software. It doesn't care about color profiles, so we need to convert our file to the correct color profile separately. In Adobe Illustrator, this is how you do it:
- Open your file in Adobe Illustrator
- Click, "Save a Copy" and select the PDF format.
- Go to the Output tab.
- Select Color Conversion: Convert To Destination, and Destination: HP DesignJet800 Poster Paper Best Quality.
- Save the PDF.
- Open the PDF in in HP Instant Printing and print from there.
Borders and margins
The printer will not print to the edge of the paper. It will always leave 5.5mm on both the left and the right side, 17mm on the back edge, and 18.5mm on the front edge.
For the most consistent results, use a pdf that has the same width (and height unless printing from a roll) as your paper. And in the HP Instant Printing application, make sure the Clip content by margins option is selected. Then you can manually make sure that your content has appropriate margins in your design document.
Handhavande av maskinen
Manual
Förbrukningsmaterial
Det finns papper på rulle som man betalar i webshopen.
Rulle med papper 90g/m2 för t.ex. ritningar
Rulle med papper 180g/m2 för t.ex. posters
Ägare
Maskinen inköpt 2019 och ägs av Stockholm Makerspace
