Cutting Machine Silhouette Cameo Pro MK-II: Skillnad mellan sidversioner
Arru (diskussion | bidrag) Ingen redigeringssammanfattning |
Voxel (diskussion | bidrag) m (Remove unnecessary bold headers) |
||
| Rad 23: | Rad 23: | ||
== Usage == | == Usage == | ||
=== | === Starting the Machine === | ||
Power on the machine by pressing and holding the power button on the right side. | Power on the machine by pressing and holding the power button on the right side. | ||
=== | === Preparing the material feed === | ||
# Choose material: foil on a roll, or Cameo mat | # Choose material: foil on a roll, or Cameo mat | ||
| Rad 37: | Rad 37: | ||
# Press ⌃ button at bottom edge to load material | # Press ⌃ button at bottom edge to load material | ||
=== | === Tool selection === | ||
# To change tools: pull forward on tool holder's protruding tab, lift the tool upward. Insert the new tool using the same procedure, in reverse. | # To change tools: pull forward on tool holder's protruding tab, lift the tool upward. Insert the new tool using the same procedure, in reverse. | ||
# The completely white cutting tool is “auto depth” one, suitable for cutting when you are unsure of the exact settings. | # The completely white cutting tool is “auto depth” one, suitable for cutting when you are unsure of the exact settings. | ||
=== | === Software preparation === | ||
# Start ''Silhouette Studio'' on the computer next to the cutting machines. | # Start ''Silhouette Studio'' on the computer next to the cutting machines. | ||
# Select Cameo Pro MK-II in the top right white box. It should say "ready" in green letters, if not, check that it's | # Select Cameo Pro MK-II in the top right white box. It should say "ready" in green letters, if not, check that it's | ||
| Rad 50: | Rad 50: | ||
# If using the Cameo grid mat for precise placement, select ''Cameo Mat'' from the options on the right side of the window, and adjust the transparency slider so you can see lines and numbers. | # If using the Cameo grid mat for precise placement, select ''Cameo Mat'' from the options on the right side of the window, and adjust the transparency slider so you can see lines and numbers. | ||
=== | === Cutting === | ||
# Click the '''SEND''' tab. | # Click the '''SEND''' tab. | ||
# Select the tool(s) you inserted and the material you are using. | # Select the tool(s) you inserted and the material you are using. | ||
| Rad 58: | Rad 58: | ||
# Your design will now be cut / drawn / engraved | # Your design will now be cut / drawn / engraved | ||
=== | === Unloading === | ||
Press ⌄ at the bottom of the control panel, multiple times if needed, to unload material | Press ⌄ at the bottom of the control panel, multiple times if needed, to unload material | ||
Versionen från 14 oktober 2025 kl. 14.40
| Silhouette Cameo Pro MK-II info |
| Usage: free for all |
| Model: Silhouette Cameo Pro MK-II |
| Material width: 24" / 609mm |
| Booking: First come, first served |
| Cost: None (but vinyl by the dm is purchased in web store) |
| Logging: None |
| Location: Big Room |
The Silhouette Cameo Pro MK-II is a large-format cutting machine with an expanded 24-inch cutting width, which can be fed with material on rolls as well as on adhesive mats. It is capable of cutting a wide range of materials, including vinyl, paper, cardstock, fabric, and thin leather. Additionally, pen plotting is also possible using purpose-made or user-supplied pens.
This machine is especially suited for large jobs (> 12" in any direction) or when feeding vinyl directly from a roll. If you are going to cut thin/delicate materials like copy paper, or want special effects like foil transfer or engraving, consider using Silhouette Curio 2 instead.
Usage
Starting the Machine
Power on the machine by pressing and holding the power button on the right side.
Preparing the material feed
- Choose material: foil on a roll, or Cameo mat
- Roll: attach roll support under the front of the cutter, adjust width and place roll onto support
- Mat: remove roll support if needed, [mat attachment instructions pending]
- Adjust the rollers so that the outermost ones sit close to the edge of the foil/mat, and the rest are evenly spaced across
- Push the material up against the intake
- Line up your material with the alignment indicator to the left of the intake
- Press ⌃ button at bottom edge to load material
Tool selection
- To change tools: pull forward on tool holder's protruding tab, lift the tool upward. Insert the new tool using the same procedure, in reverse.
- The completely white cutting tool is “auto depth” one, suitable for cutting when you are unsure of the exact settings.
Software preparation
- Start Silhouette Studio on the computer next to the cutting machines.
- Select Cameo Pro MK-II in the top right white box. It should say "ready" in green letters, if not, check that it's
- Turned on
- Connected via USB
- Has material loaded (try unloading and loading again)
- Open your design and adjust its size and placement.
- If using the Cameo grid mat for precise placement, select Cameo Mat from the options on the right side of the window, and adjust the transparency slider so you can see lines and numbers.
Cutting
- Click the SEND tab.
- Select the tool(s) you inserted and the material you are using.
- Adjust the force and cutting depth settings.
- For textile transfers, stencils, and use cases, choose Mirror (unless you have already mirrored your design, earlier in the process).
- Click Send.
- Your design will now be cut / drawn / engraved
Unloading
Press ⌄ at the bottom of the control panel, multiple times if needed, to unload material
Accessories
- Cutting mats with registration grid
- Gel pens
- Pen Holder (for regular pens)