115
redigeringar
Cutting Machine Silhouette Curio 2: Skillnad mellan sidversioner
Cutting Machine Silhouette Curio 2 (visa wikitext)
Versionen från 18 november 2025 kl. 18.14
, 18 novemberplotting in multiple colors
Arru (diskussion | bidrag) |
Arru (diskussion | bidrag) (plotting in multiple colors) |
||
| Rad 147: | Rad 147: | ||
#*# [[Fil:Silhouette standard Pen holder assembly.jpg|ingen|miniatyr|150x150px|Insert pen into holder]][[Fil:Pen holder mounted.jpg|ingen|miniatyr|200x200px|Mount pen holder to cutter just like a blade tool]] | #*# [[Fil:Silhouette standard Pen holder assembly.jpg|ingen|miniatyr|150x150px|Insert pen into holder]][[Fil:Pen holder mounted.jpg|ingen|miniatyr|200x200px|Mount pen holder to cutter just like a blade tool]] | ||
#* Custom pen ("C" adapter) | #* Custom pen ("C" adapter) | ||
#*# Try out the 3 colored adapter rings to see which one fits your pen the most snugly | #*# Try out the 3 colored adapter rings to see which one fits your pen the most snugly[[Fil:Silhouette pen adapter parts.jpg|ingen|miniatyr|200x200px|Inserting the pen into adapter ring of suitable size]] | ||
#*# Insert pen into the white bottom part and screw the adapter into it | #*# Insert pen into the white bottom part and screw the adapter into it | ||
#*# The pen tip must reach out of the bottom hole at just the correct distance. | #*# The pen tip must reach out of the bottom hole at just the correct distance. | ||
#*## Push the pen as far as it will go out of the white holder | #*## Push the pen as far as it will go out of the white holder | ||
#*## Attach the transparent pen holder cap, pushing the pen back in until the cap is fully in place | #*## Attach the transparent pen holder cap, pushing the pen back in until the cap is fully in place | ||
#*## Check that the pen tip sits centered in the cap | #*## Check that the pen tip sits centered in the cap[[Fil:Silhouette pen adapter parts (assembled).jpg|ingen|miniatyr|200x200px|Pen adapter assembled, note the transparent cap, pen tip should be just touching it.]] | ||
#*# Screw on the white top adapter ring, gentle fingers as it is prone to breaking | #*# Screw on the white top adapter ring, gentle fingers as it is prone to breaking | ||
#*# Check that there is no play (wiggle) in the pen | #*# Check that there is no play (wiggle) in the pen | ||
#*# Mount pen assembly in tool position 2, just like a cutting tool | #*# Mount pen assembly in tool position 2, just like a cutting tool[[Fil:Pen adapter fitted to Curio 2.png|ingen|miniatyr|267x267px|Adapter with pen fitted to Curio tool holder #2]] | ||
#*# ''TODO: list of known pen types that fit one of the adapters'' | #*# ''TODO: list of known pen types that fit one of the adapters'' | ||
# Perform the same steps in Silhouette studio as for cutting, selecting "Pen holder", suitable material, and "Sketch" instead of Cut. | # Perform the same steps in Silhouette studio as for cutting, selecting "Pen holder", suitable material, and "Sketch" instead of Cut. | ||
# ''[ | #To plot in '''multiple colors''', use the "Cut line by color" feature to only plot lines having the currently mounted pen color. Then switch pen color, change the setting accordingly, and plot again.[[Fil:Selecting tool actions.jpg|ingen|miniatyr|200x200px|In the send panel, tool action can be determined by color]] | ||
== Accessories == | == Accessories == | ||