143
redigeringar
Cutting Machine Silhouette Curio 2: Skillnad mellan sidversioner
→Cutting instructions: cutting with registration marks
Arru (diskussion | bidrag) |
Arru (diskussion | bidrag) (→Cutting instructions: cutting with registration marks) |
||
| Rad 136: | Rad 136: | ||
*# Find the cut job listed next to the Send button in Silhouette studio. Press close ╳ next to the cut job. | *# Find the cut job listed next to the Send button in Silhouette studio. Press close ╳ next to the cut job. | ||
* To resume, press ⏸️ button again | * To resume, press ⏸️ button again | ||
=== Cutting prints with registration marks === | |||
Using this technique and suitable sticker paper you can make professional-looking cut-out stickers. There are also other uses, like business- or playing cards, signs etc. | |||
This is a feature of the Curio 2 cutter, so it cannot be done on Cameo Pro. | |||
# Launch Silhouette studio, select Edit -> Registration marks to bring up the registration marks settings | |||
# Enable registration marks | |||
# Prepare your design. It must fit within the red outlined rectangle, the cutter will refuse to cut outside of it. The design also can't obscure any of the registration marks. | |||
# For bitmap images that you want contour-cut (not just the enclosing rectangle), make sure that you have a path corresponding to the cut-out contour in your document. | |||
# In the send tab in Silhouette studio, select/deselect and confirm that your cutting outlines match what you want your sticker outlines to look like | |||
# In Silhouette studio's design tab, make sure any paths that are only used for cutting outlines have no fill- or outline color set, otherwise they will end up in the print. WYSIWYG. | |||
# Load your sticker paper into the printer. | |||
# In the registration marks palette window, click Print. It is '''important to print the design from here''', or the metrics may not line up in later steps. Follow thru the steps to start printing, selecting paper type and tray as needed. | |||
# Place the printout on the sticky Cameo cutting mat. | |||
# Cut as usual. As long as there are registration marks in the document, the cutter will look for those on the printout and line up perfectly. For stickers that stay together on the sheet, you can try AutoBlade with force 15, blade depth 3. For separate stickers cut all the way through, you will need to use the kraft blade with settings according to the thickness of your sticker paper sheet. | |||
== Heat foil instructions == | == Heat foil instructions == | ||