Engraving with Sandblasting / gravering med sandblästring: Skillnad mellan sidversioner

Engraving with Sandblasting / gravering med sandblästring (visa wikitext)

84 byte lades till , 25 april 2023

ingen redigeringssammanfattning

235

redigeringar

Versionen från 18 april 2023 kl. 12.38 (visa wikitext) Christoffer J (diskussion \| bidrag) Ingen redigeringssammanfattning Märke: Visuell redigering ← Äldre redigering		Versionen från 25 april 2023 kl. 20.43 (visa wikitext) Voxel (diskussion \| bidrag) Ingen redigeringssammanfattning Nyare redigering →
Rad 1:		Rad 1:
			[[Fil:Sandblasting_instructions.png\|300px\|thumb\|right\|Sandblasting in a nutshell]]

	Here you find a list of steps to engrave a design on metal or glass using the vinyl cutter and sandblasting. This list was originally made to help to remember the engraving with sandblasting course and is might therefore not be self-explanatory at every step. It is always better to first make a course, or ask someone from the community that has engraved and/or sandblasted before.		Here you find a list of steps to engrave a design on metal or glass using the vinyl cutter and sandblasting. This list was originally made to help to remember the engraving with sandblasting course and is might therefore not be self-explanatory at every step. It is always better to first make a course, or ask someone from the community that has engraved and/or sandblasted before.