30
redigeringar
Bordssåg, Hammer K3 Winner: Skillnad mellan sidversioner
Bordssåg, Hammer K3 Winner (visa wikitext)
Versionen från 1 december 2025 kl. 12.50
, Måndag kl. 12.50→Säkerhetsinformation
| Rad 46: | Rad 46: | ||
*Make sure that the stock is fully past the blade before turning the saw off | *Make sure that the stock is fully past the blade before turning the saw off | ||
*Keep hands at least 15 cm from the blade. Use push sticks when cutting closer | *Keep hands at least 15 cm from the blade. Use push sticks when cutting closer | ||
*Rough stock must be surfaced and at least | *Rough stock must be surfaced and at least two sides jointed before being cut with the rip fence. | ||
*Use only new stock | *Use only new stock. Reclaimed wood (e.g. pallet wood) may contain sand or metal pieces like nails. | ||
*Use a push stick to push small scrap away | *Use a push stick to push small scrap away | ||
* | *Be careful when cross cutting small pieces. 15 cm cross-cuts or under should be made on the miter saw | ||
*As you complete your work, turn off the saw and | *As you complete your work, turn off the saw and wait until the blade has stopped | ||
*Clear the saw of dust and waste. Return the saw blade to zero settings. Sweep the work area! | *Clear the inside of the saw of dust and waste. Return the saw blade to zero settings. Sweep the work area! | ||
==Handhavande av maskinen== | ==Handhavande av maskinen== | ||
===Material=== | ===Material=== | ||