30
redigeringar
Bordssåg, Hammer K3 Winner: Skillnad mellan sidversioner
Bordssåg, Hammer K3 Winner (visa wikitext)
Versionen från 1 december 2025 kl. 18.15
, Måndag kl. 18.15→Säkerhetsinformation
| Rad 41: | Rad 41: | ||
*'''Do not use Dado-stacks (https://en.wikipedia.org/wiki/Dado_set<nowiki/>)''' | *'''Do not use Dado-stacks (https://en.wikipedia.org/wiki/Dado_set<nowiki/>)''' | ||
*'''Never cut stock free hand''' | *'''Never cut stock free hand''' | ||
*Be certain that the blade is sharp | *Be certain that the blade is sharp. | ||
*Set the blade | *Set the blade roughly 10 mm above the stock. | ||
*Stand to one side of the | *Stand to one side of the blade, do not reach across it. | ||
* | *Push the stock is fully past the blade before turning the saw off. | ||
*Keep hands at least 15 cm from the blade. Use push sticks when cutting closer | *Keep hands at least 15 cm from the blade. Use push sticks when cutting closer. | ||
* | *Your stock must stand firmly on the table and the side against the rip fence '''<u>must</u>''' be flat. | ||
*Use only new stock. Reclaimed wood (e.g. pallet wood) may contain sand or metal pieces like nails. | *Use only new stock. Reclaimed wood (e.g. pallet wood) may contain sand or metal pieces like nails and is '''<u>forbidden</u>''' on our machines. | ||
*As you complete your work, turn off the saw and wait until the blade has stopped. | |||
*When done, return the saw blade to zero settings. Sweep the work area! | |||
*As you complete your work, turn off the saw and wait until the blade has stopped | *Now and then, clear the inside of the saw of dust and waste. Don't think "others" will do it. | ||
* | |||
==Handhavande av maskinen== | ==Handhavande av maskinen== | ||