Cutting Machine Silhouette Curio 2

Silhouette Curio 2 info

Usage: free for all

Model: Silhouette Curio 2

Work surface: 12x12"

Booking: First come, first serve

Cost: None (but vinyl by the dm is purchased in web store)

Logging: None

Location: Big Room

The Silhouette Curio 2 is a precision flatbed cutting machine featuring an electrostatic bed for cutting without a mat, 20mm vertical clearance for thicker materials, and two tool holders. It offers automatic tool detection and material thickness measurement. Supports projects including cutting, engraving, pen plotting, foil heat transfer and embossing.

Usage

Important: The electrostatic cutting table must always be used with the protective plastic sheet on top. Failing to do this will cause permanent damage to the electrostatic grabbing surface.

Starting the Machine

Power on the machine by pressing and holding the power button on the right side.

Preparing the cutting Table

1. Make sure the electrostatic cutting table (painted metal surface, without raised edges) is mounted in the cutter
2. To change it, pull the table straight out towards you. About halfway out, it can be lifted free.
3. Place the transparent protective plastic sheet over the cutting table, edge to edge. Use a soft scraper, if needed to flatten it.
4. Press the touch button that activates the electrostatic hold [needs icon/image].

Preparing the material

1. Place the material you want to cut on the table.
2. The material must be completely flat in order to adhere well electrostatically.
3. You can also place a regular Cameo mat on top instead.
4. Wait for around a minute for the electric charge to grab the material properly.
5. Try moving the material with all fingertips on one hand. If it resists movement, the hold is strong enough to cut.
6. If the material does not adhere well, switch to the “debris” plate (made entirely of plastic with raised edges) and tape a Cameo mat onto it.

Tool selection

1. To change tools: pull forward on tool holder's protruding tab, lift the tool upward. Iinsert the new tool using the same procedure in reverse.
2. The completely white cutting tool is “auto depth” one, suitable for cutting when you are unsure of the exact settings.

Software preparation

1. Start Silhouette Studio on the computer next to the cutting machines.
2. Select Curio 2 in the top right white box. It should say "ready" in green letters, if not, check that it's
   1. Turned on
   2. Connected via USB
3. Open your design and adjust its size and placement.
4. If using the Cameo grid mat for precise placement, select Cameo Mat from the options on the right side of the window, and adjust the transparency slider so you can see lines and numbers.

Cutting

1. Click the SEND tab.
2. Select the tool(s) you inserted and the material you are using.
3. Adjust the force and cutting depth settings.
4. For textile transfers, stencils, and use cases, choose Mirror (unless you have already mirrored your design, earlier in the process).
5. Click Send.
6. Your design will now be cut / drawn / engraved

Accessories

• Cutting mats with registration grid​
• Heat pen​
• Power engraver​
• Leather punch
• Embossing tool​
• Gel pens
• Pen Holder (for regular pens)