195
redigeringar
Anycubic Photon training: Skillnad mellan sidversioner
ingen redigeringssammanfattning
Zinob (diskussion | bidrag) Ingen redigeringssammanfattning |
Zinob (diskussion | bidrag) Ingen redigeringssammanfattning |
||
| Rad 1: | Rad 1: | ||
This is a draft for training material for AnyCubic Photon | This is a draft for training material for AnyCubic Photon | ||
=== What is SLA-printing === | ===What is SLA-printing=== | ||
=== Risks and security | ===Risks and security precautions=== | ||
Resin is toxic and | Resin is mildly toxic and an allergen. | ||
Use glasses, gloves and only touch things inside the cabinet as soon as you have started working. | |||
Wash your hands after you have removed the gloves. only Use soap and water, never use IPA or acetone to wash your skin since it does remove most of the resin it helps the rest of it penetrating deeper. | |||
===Slicing your files=== | |||
Slicers and slicer settings | Slicers and slicer settings | ||
https://www.chitubox.com/ | https://www.chitubox.com/ | ||
Drainage | Support: Minimas, local minimas, edges | ||
Avoid horizontal faces or edges. | |||
Drainage: Air-holes and drain holes. | |||
Hollowing: Reduces resin-use, makes curing quicker and reduces the number of supports needed | |||
Under exposure: Print fails or loss of small details | |||
Over exposure: print gets to thick, loss of small details | |||
=== | Common errors: To few supports | ||
===Preparering the machine=== | |||
checking and refilling the resin | checking and refilling the resin | ||
| Rad 28: | Rad 34: | ||
Cleaning the build plate | Cleaning the build plate | ||
=== | ===Finishing the printed object=== | ||
Let it drip for a little while. | |||
Run it in resin-away, first pre then final wash. | |||
Let it sit in the UV-box for about 20 minutes | |||
===Cleaning the printer=== | |||
Wipe the printer and the work-surfaces with IPA, throw the ragg away. | |||
If something seems to have broken off: Filter the resin! | |||
<br /> | |||