166
redigeringar
Spånsug, Felder RL 125: Skillnad mellan sidversioner
→Generell information
Cloraux (diskussion | bidrag) m (Adding new page about chip extractor) |
Cloraux (diskussion | bidrag) |
||
| Rad 5: | Rad 5: | ||
<br /> | |||
[[Fil:Felder RL 125.jpg|miniatyr]] | |||
==Generell information== | ==Generell information== | ||
The Felder RL 125 is a powerfull chip extractor connected to most of the machines in the woodshop. A sound absorber was added on top of the machine to keep the noise level acceptable. A combination of 100mm fixed pipes and flexible hoses with doors are used to direct the suction to the desired machine. | |||
To use the vacuum, start the machine by turning the red knob and open the desired door connecting to the machine you are using. Check before starting it that all the other doors are closed in order to get the most flow. In a near futur, the vacuum will turn ON and OFF automatically when opening/closing the doors. | |||
The vacuum should be used at anytime with the following machines: | |||
- Table saw, table router and planer with the flexible hose. Use as well to clean around the miter saw and the lathe. | |||
- Band saw | |||
- Miter saw (two dedicated | |||
<br /> | In a near futur, the belt sander and drill press will have a dedicated hose too. | ||
Near the belt sander, a pipe goes all the way to the floor and make the floor cleaning really easy. <br /> | |||
==Säkerhetsinformation== | ==Säkerhetsinformation== | ||
''Saker man bör tänka på när man använder maskinen för att inte skada sig, andra, eller maskinen'' | ''Saker man bör tänka på när man använder maskinen för att inte skada sig, andra, eller maskinen'' | ||