166
redigeringar
Bordssåg, Meec MJ2325B: Skillnad mellan sidversioner
→Säkerhetsinformation
Cloraux (diskussion | bidrag) Ingen redigeringssammanfattning |
Cloraux (diskussion | bidrag) |
||
| Rad 32: | Rad 32: | ||
==Säkerhetsinformation== | ==Säkerhetsinformation== | ||
*Wear safety glasses and turn on the dust extractor | *'''Wear safety glasses and turn on the dust extractor''' | ||
*The Riving Knife is the most important safety feature and may not be removed | *'''The Riving Knife is the most important safety feature and may not be removed''' | ||
*Be certain that the blade is sharp and that it is the right blade for your work | *Be certain that the blade is sharp and that it is the right blade for your work | ||
*Set the blade so that it extends no more that 5 mm above the stock to be cut | *Set the blade so that it extends no more that 5 mm above the stock to be cut | ||
| Rad 40: | Rad 40: | ||
*Keep hands at least 15 cm from the blade. Use push sticks when cutting closer | *Keep hands at least 15 cm from the blade. Use push sticks when cutting closer | ||
*Rough stock must be surfaced and at least one side jointed before being cut | *Rough stock must be surfaced and at least one side jointed before being cut | ||
*Never cut stock free hand | *'''Never cut stock free hand''' | ||
*Use only new stock that is free of knots, splits and warp | *Use only new stock that is free of knots, splits and warp | ||
*Use a push stick to push small scrap away | *Use a push stick to push small scrap away | ||
*Cross cutting on the table saw is dangerous. 30 cm cross cuts or under should be made on the BOSCH sliding compound miter saw | *Cross cutting on the table saw is dangerous. 30 cm cross cuts or under should be made on the BOSCH sliding compound miter saw | ||
*As you complete your work, turn off the saw and remain until the blade has stopped | *As you complete your work, turn off the saw and remain until the blade has stopped | ||
*Clear the saw of dust and waste. Return the saw blade to zero settings. Sweep the work area! | |||
==Handhavande av maskinen== | ==Handhavande av maskinen== | ||