Table router, Triton TRA001: Skillnad mellan sidversioner

← Äldre redigering

Table router, Triton TRA001 (visa wikitext)

Versionen från 13 augusti 2024 kl. 07.40

476 byte lades till , 13 augusti 2024

Maskinen såld.

VisuellWikitext

Christoffer J

Administratörer

1 112

redigeringar

@@ Rad 1: / Rad 1: @@
+{{Museum}}
+Maskinen såldes 2024 efter att en ersättare skaffats till det nya trärummet.
 {| style="clear: right; float: right; width: 20em; padding: 0.3em; margin: 0.5em 0 0.5em 1em; border: 1px solid #A3B1BF; background: #f5faff; text-align: left; font-size: 100%; line-height: 1.5em;"
 |-
@@ Rad 30: / Rad 33: @@
 Make sure to attach the dust extraction system before using the router.
-You can raise or lower the bit using a crank usually found in the storage below the table. It fits in a hole in the table, and reaches to a ball head with a nail through it on the router.
+To raise and lower the bit, always use the big round knob on the router body.
+'''Use the crank above the table only for fine adjustment!''' It fits in a hole in the table, and reaches to a ball head with a nail through it on the router.
 [[Fil:Router crank.jpg|ramlös|133x133px]]
-===Replacing the bit===
+===Changing the bit===
 [[Fil:Router-wrench.jpg|alt=|höger|ramlös]]
-First, flip the switch off. Even with the machine unplugged, it’s necessary to disengage a safety mechanism. You need to push the power switch cover fully open, flip the switch and let the cover close completely.
+'''Unplug the machine.''' First, flip the switch off. Even with the machine unplugged, it’s necessary to disengage a safety mechanism. You need to push the power switch cover fully open, flip the switch and let the cover close completely.
 Then, remove the red protective plate, unlocking it with the grey plastic tool.
-Then, using the crank, raise the bit to its highest position. Turning the chuck, you should hear a click when the spindle lock engages.
+Then, using the lifting knob, raise the bit to its highest position. Turning the chuck, you should hear a click when the spindle lock engages.
 Once in this position, unlock the bit using the black flat wrench. If the new bit has a shank of a different size, unscrew the chuck completely and replace it with one the proper size.
@@ Rad 47: / Rad 52: @@
 Put away the tools, flip the switch back on, and you’re good to go!
+==Power on and off==
+There are two power switches for the router; one on the front of the router table and one on the right side of the router itself. The switch on the router is lit red when the table switch is turned on. Slide the plastic safety cover back and push the switch to start the router.
 ==Förbrukningsmaterial==