166
redigeringar
Table router, Triton TRA001: Skillnad mellan sidversioner
→Changing the bit
Cloraux (diskussion | bidrag) |
Cloraux (diskussion | bidrag) |
||
| Rad 38: | Rad 38: | ||
===Changing the bit=== | ===Changing the bit=== | ||
[[Fil:Router-wrench.jpg|alt=|höger|ramlös]] | [[Fil:Router-wrench.jpg|alt=|höger|ramlös]] | ||
First, flip the switch off. Even with the machine unplugged, it’s necessary to disengage a safety mechanism. You need to push the power switch cover fully open, flip the switch and let the cover close completely. | '''Unplug the machine.''' First, flip the switch off. Even with the machine unplugged, it’s necessary to disengage a safety mechanism. You need to push the power switch cover fully open, flip the switch and let the cover close completely. | ||
Then, remove the red protective plate, unlocking it with the grey plastic tool. | Then, remove the red protective plate, unlocking it with the grey plastic tool. | ||
Then, using the | Then, using the lifting knob, raise the bit to its highest position. Turning the chuck, you should hear a click when the spindle lock engages. | ||
Once in this position, unlock the bit using the black flat wrench. If the new bit has a shank of a different size, unscrew the chuck completely and replace it with one the proper size. | Once in this position, unlock the bit using the black flat wrench. If the new bit has a shank of a different size, unscrew the chuck completely and replace it with one the proper size. | ||