237
redigeringar
Plan- och rikthyvel, Scheppach HMC 3200: Skillnad mellan sidversioner
Plan- och rikthyvel, Scheppach HMC 3200 (visa wikitext)
Versionen från 14 maj 2022 kl. 20.18
, 14 maj 2022ingen redigeringssammanfattning
Philon- (diskussion | bidrag) m (→Material) |
Voxel (diskussion | bidrag) Ingen redigeringssammanfattning |
||
| Rad 25: | Rad 25: | ||
Wood planks must be cleaned with a hard brush to remove sand dust. <br /> | Wood planks must be cleaned with a hard brush to remove sand dust. <br /> | ||
== | ==Safety instructions== | ||
*Wear safety glasses, keep hands at least 15 cm from the cutterhead | *Wear safety glasses, keep hands at least 15 cm from the cutterhead | ||
| Rad 51: | Rad 51: | ||
'''<big>The use of pallet wood, reclaimed flooring, reclaimed outdoor deck planks and any kind of wood used for concrete formwork is totally forbidden.</big>''' | '''<big>The use of pallet wood, reclaimed flooring, reclaimed outdoor deck planks and any kind of wood used for concrete formwork is totally forbidden.</big>''' | ||
=== | ===Usage instructions when planing=== | ||
== | Mount the yellow dust collector attachment when using it as a planer, and make sure it is connected to the central vacuum. | ||
===Usage instructions when jointing=== | |||
Use the dust collector attachment that looks like a brown box. Set the table to 10.5-11 cm, enough for the box to fit and to still be able to adjust the in-feed table height. | |||
The box stays in place with some magnets. Connect the box to the central vacuum. | |||
==Spiral cutterhead== | |||
The new spiral cutterhead uses 15mmx15mmx2.5mm-R150 carbide inserts. We have a set of 10 spare. | The new spiral cutterhead uses 15mmx15mmx2.5mm-R150 carbide inserts. We have a set of 10 spare. | ||