106
redigeringar
(Skapade sidan med '{| style="clear: right; float: right; width: 20em; padding: 0.3em; margin: 0.5em 0 0.5em 1em; border: 1px solid #A3B1BF; background: #f5faff; text-align: left; font-size: 100%; line-height: 1.5em;" |- | align="center" |'''Snabbfakta Bordssåg, Hammer K3 Winner''' |- | style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Användning:''' Kräver kurs |- | style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Modell:''' Hammer K3 Winner |- | s...') |
Ingen redigeringssammanfattning |
||
Rad 26: | Rad 26: | ||
*'''Wear safety glasses and turn on the dust extractor''' | *'''Wear safety glasses and turn on the dust extractor''' | ||
*'''The Riving Knife is the most important safety feature and may not be removed''' | *'''The Riving Knife is the most important safety feature and may not be removed''' | ||
*'''Do not use any blades not provided by the Makerspace. The saw has special holes to accomodate the motor break.''' | |||
*'''Do not use Dado-stacks (https://en.wikipedia.org/wiki/Dado_set<nowiki/>)''' | |||
*'''Never cut stock free hand''' | |||
*Be certain that the blade is sharp | *Be certain that the blade is sharp | ||
*Set the blade so that it extends no more that 5 mm above the stock to be cut | *Set the blade so that it extends no more that 5 mm above the stock to be cut | ||
Rad 32: | Rad 35: | ||
*Keep hands at least 15 cm from the blade. Use push sticks when cutting closer | *Keep hands at least 15 cm from the blade. Use push sticks when cutting closer | ||
*Rough stock must be surfaced and at least one side jointed before being cut | *Rough stock must be surfaced and at least one side jointed before being cut | ||
*Use only new stock that is free of knots, splits and warp | *Use only new stock that is free of knots, splits and warp | ||
*Use a push stick to push small scrap away | *Use a push stick to push small scrap away |
redigeringar