Table router: Skillnad mellan sidversioner

Table router (visa wikitext)

115 byte lades till , 5 oktober

ingen redigeringssammanfattning

67

redigeringar

Versionen från 5 oktober 2024 kl. 14.44 (visa wikitext) Leila (diskussion \| bidrag) (Skapade sidan med ' It's basically a fixed cnc spindle, controlled with a VFD. The front panel on the left let you start/stop and select the speed, from 8000 rpm to 24 000 rpm. The dust collection is on the right, so the pipe fit nicely under the table and out of the way. The new fence screw into the slots of the table and when not used, it's simply stored in the front of the machine, out of the way. All the accessories are stored neatly on the drawer on the right side. You will find th...')		Versionen från 5 oktober 2024 kl. 14.59 (visa wikitext) Leila (diskussion \| bidrag) Ingen redigeringssammanfattning Märke: Visuell redigering Nyare redigering →
Rad 1:		Rad 1:
			[[Fil:Bordssåg.jpg\|miniatyr\|[[Fil:Router.jpg\|miniatyr]][[Fil:Router2.jpg\|miniatyr]][[Fil:Router 3.jpg\|miniatyr]]]]
	It's basically a fixed cnc spindle, controlled with a VFD. The front panel on the left let you start/stop and select the speed, from 8000 rpm to 24 000 rpm.		It's basically a fixed cnc spindle, controlled with a VFD. The front panel on the left let you start/stop and select the speed, from 8000 rpm to 24 000 rpm.