Table router, Triton TRA001

---

Nostalgi

Denna sida är inte längre aktuell och sparas främst av nostalgiska skäl.

---

Maskinen såldes 2024 efter att en ersättare skaffats till det nya trärummet.

Snabbfakta Triton TRA001

Modell: Triton TRA001

Bokningsbar: Nej

Kostnad att använda: Gratis

Power: 2400W

Handhavande av maskinen

Manual

Description on the Triton website.

Material

For wood and some plastics only.

Do not ever use metal, even as a template.

Usage instructions

Make sure to attach the dust extraction system before using the router.

To raise and lower the bit, always use the big round knob on the router body.

Use the crank above the table only for fine adjustment! It fits in a hole in the table, and reaches to a ball head with a nail through it on the router.

Changing the bit

Unplug the machine. First, flip the switch off. Even with the machine unplugged, it’s necessary to disengage a safety mechanism. You need to push the power switch cover fully open, flip the switch and let the cover close completely.

Then, remove the red protective plate, unlocking it with the grey plastic tool.

Then, using the lifting knob, raise the bit to its highest position. Turning the chuck, you should hear a click when the spindle lock engages.

Once in this position, unlock the bit using the black flat wrench. If the new bit has a shank of a different size, unscrew the chuck completely and replace it with one the proper size.

Place the new bit, tighten it with the wrench, lower it, and place back the red protective plate (using the smallest hole that would fit over the bit).

Put away the tools, flip the switch back on, and you’re good to go!

Power on and off

There are two power switches for the router; one on the front of the router table and one on the right side of the router itself. The switch on the router is lit red when the table switch is turned on. Slide the plastic safety cover back and push the switch to start the router.

Underhåll och reservdelar

Underhåll

• Daily

• Monthly

Reservdelar

We do not have spare parts for this machine.

Ägare

Maskinen inköpt av Makerspace