Skillnad mellan versioner av "Bandsåg, EJCA BA45"

Från Stockholm Makerspace Wiki
Hoppa till navigering Hoppa till sök
Rad 13: Rad 13:
 
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Info 1:''' Kap- och gersåg
 
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Info 1:''' Kap- och gersåg
 
|-
 
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Arbetsyta:''' 70 x 312 mm 52°-60°
+
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Obelastad hastighet:''' -
 
|-
 
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Obelastad hastighet:''' 5500RPM
+
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Blade length:''' 3090 mm
 
|-
 
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Klingdiameter:''' 216 mm
+
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Wheels-Ø:''' 446 x 32 mm
 
|-
 
|-
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Klinghåls-Ø:''' 30 mm
+
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Märkeffekt:''' -
|-
 
| style="padding:0.1em; font-size:1.0em; background-color:#dfeff2" |'''Märkeffekt:''' 1600W
 
 
|-
 
|-
  
Rad 27: Rad 25:
  
 
==Generell information==
 
==Generell information==
Sågen kan vinklas 52° Vänster till 60° Höger i förhållande till anhållet i bakkant (geringsvinkel)
 
 
Sågen kan vinklas 47° Vänster till 2° Höger i förhållande till bordet (snedkapningsvinkel)
 
 
 
 
This saw can be used to cut relatively large pieces of wood and is ideal to make cross-cuts. It is set for square, miter and bevel cuts, or a combination of miter and bevel cuts (compound cut).
 
This saw can be used to cut relatively large pieces of wood and is ideal to make cross-cuts. It is set for square, miter and bevel cuts, or a combination of miter and bevel cuts (compound cut).
  
Rad 42: Rad 35:
 
==Säkerhetsinformation==
 
==Säkerhetsinformation==
  
*Keep hands at least 15 cm from the blade
+
*Wheel guard doors closed and blade properly adjusted before turning on the machine
*Wear safety glasses and hearing protection
+
*Upper guide assembly no more than 1cm above the work
*Keep the blade guard in position at all times
+
*Allow the saw to reach full speed before starting to feed the work
*Hold stock firmly on the table and against the fence
+
*The stock must be held flat on the table
*After making the cut but before raising the saw make sure that the blade has come to a complete stop.
+
*Feed the saw only as fast as the teeth will remove the wood easily
*When making multiple cuts of various angles do not move hands under the blade whether it is moving or not
+
*Keep hands at least 10 cm away from the blade
*Sweep the workstation and the floor. All scrap goes in the scrap bin.
+
*Plan cuts to avoid backing out of curves, whenever possible
 +
*Make turns carefully and do not cut radii so small that the blade is twisted then broken
 +
*Round stock should not be cut unless mounted firmly in a jig
 +
*Do not let small pieces of wood accumulate around the blade
 +
*If you hear a clicking noise, turn off the machine at once. This sound indicates a crack in the blade
 +
*Turn off the machine as soon as you finish working
 +
*Sweep the table and the floor. All scrap in the scrap bin. Lower the upper guide assembly
  
 
==Handhavande av maskinen==
 
==Handhavande av maskinen==
 
===Manual===
 
===Manual===
  
[https://www.bosch-professional.com/binary/ocsmedia/optimized/full/o290859v21_160992A4D3_201808.pdf Manual på Boschs hemsida]  
+
[[Media:Instruktionsbok Ejca BA40,45,50.pdf|Instruktionsbok_Ejca_BA40,45,50]]  
  
 
===Material===  
 
===Material===  
Endast för trä!
+
Endast för trä! Do not cut wet or green wood. Do not cut freshly glued wood, wait at least 24h before cutting. 
  
Some plastics can be cut using this saw, but you need to use your own dedicated blade. Always disconnect the power before changing the blade and make sure it's properly centered before starting the saw.  
+
Some plastics and foam can be cut using this saw.
 
===Användarinstruktioner===
 
===Användarinstruktioner===
 
Se till att koppla in dammsugare innan du använder den!
 
Se till att koppla in dammsugare innan du använder den!
Rad 65: Rad 64:
  
 
==Förbrukningsmaterial==
 
==Förbrukningsmaterial==
We currently have XX spare blades for the miter saw. These blade can be resharpened, do not throw them away, instead label them as "DULL".
+
In theory we should always have an extra set of blades in case the current blade is dull. We might be able to resharpen the blades, to be confirmed.  
  
 
The blades provided by the makerspace are for general purpose and designed for cross-cutting and have about XX teeth.  
 
The blades provided by the makerspace are for general purpose and designed for cross-cutting and have about XX teeth.  
Rad 80: Rad 79:
  
 
*Daily
 
*Daily
 +
**Check for the blade alignment, and blade guide alignment (upper and lower guides).
 +
**Adjust the upper blade guide assembly heigt
 
**Visual check whether unit or parts are damaged
 
**Visual check whether unit or parts are damaged
 
**Check whether power cable is damaged
 
**Check whether power cable is damaged
**Vacuum and clean the saw and the dust collection box. Throw away scrap wood.
+
**Vacuum and clean the saw.
  
 
*Monthly
 
*Monthly
 
**Check the blade sharpness. Change blade if necessary.
 
**Check the blade sharpness. Change blade if necessary.
**Clean the laser plastic cover and remove gunk and dust on the saw.
+
**Check the lower blade garde wooden blocs and replace them is necessary.
 +
*TODO
 +
**Replace the wheel's tires (new tires are on the way)
 +
**Balance the wheels after installing the new tires.  
  
 
===Reservdelar===
 
===Reservdelar===
Rad 95: Rad 99:
 
==Logg==
 
==Logg==
  
*2020-02-XX: Miter saw station build next to the dust collector.
+
*(2020-03-XX: replace tires and balance the wheels)
*2019-10-05: Inköpt
+
*2020-02-XX: 100mm vacuum connector added
 +
*2018-XX-XX: Har fått motorskydd, nödstopp samt nya start och stoppknappar
 +
*2018-XX-XX: Inköpt
  
 
*
 
*
Rad 104: Rad 110:
  
 
[https://www.youtube.com/watch?v=1HI_1bj4J1U 8 Miter Saw Pro Tips & Tricks - Steve Ramsey - Woodworking for Mere Mortals]
 
[https://www.youtube.com/watch?v=1HI_1bj4J1U 8 Miter Saw Pro Tips & Tricks - Steve Ramsey - Woodworking for Mere Mortals]
 +
 +
<br />
  
 
==Ägare==
 
==Ägare==
Maskinen inköpt av Makerspace 2019-08-05
+
Maskinen inköpt av Makerspace 2018-XX-XX
  
 
==Gallery==
 
==Gallery==
Rad 112: Rad 120:
 
Fil:MiterSaw.jpg|Cross-cutting large solid planks
 
Fil:MiterSaw.jpg|Cross-cutting large solid planks
 
</gallery>
 
</gallery>
 
 
[[Fil:Bandsåg_Ejca_BA45.jpg|400px|thumb|left|EJCA BA45]]
 
  
 
Bandsåg för trä
 
Bandsåg för trä
  
 
Gedigen gjutjärnsmaskin tillverkad på 60- till 70-talet.
 
Gedigen gjutjärnsmaskin tillverkad på 60- till 70-talet.
 
Ägare: Stockholm Makerspace
 
Längd på band: 3090mm
 
El: 3 fas
 
 
Har fått motorskydd, nödstopp samt nya start och stoppknappar under 2018.
 
 
Manual:
 
[[Media:Instruktionsbok_Ejca_BA40,45,50.pdf]]
 

Versionen från 25 februari 2020 kl. 20.36

Snabbfakta EJCA BA45
Bandsåg Ejca BA45.jpg
Modell: EJCA BA45
Bokningsbar: Nej
Kostnad att använda: Gratis
Info 1: Kap- och gersåg
Obelastad hastighet: -
Blade length: 3090 mm
Wheels-Ø: 446 x 32 mm
Märkeffekt: -


Generell information

This saw can be used to cut relatively large pieces of wood and is ideal to make cross-cuts. It is set for square, miter and bevel cuts, or a combination of miter and bevel cuts (compound cut).

The saw is attached to the table with 4 screws and some angle combinations are unavailable due to the present configuration.

It is possible to unscrew the saw and move it to perform special cuts or to cut longer pieces. The saw must be set back to it's initial position.


This saw can be use to perform non-through cuts (Dados, Grooves & Rabbets) using the depth stop. For such operation, it's usually required to install a sacrificial fence (see pictures in the galerie)

Säkerhetsinformation

  • Wheel guard doors closed and blade properly adjusted before turning on the machine
  • Upper guide assembly no more than 1cm above the work
  • Allow the saw to reach full speed before starting to feed the work
  • The stock must be held flat on the table
  • Feed the saw only as fast as the teeth will remove the wood easily
  • Keep hands at least 10 cm away from the blade
  • Plan cuts to avoid backing out of curves, whenever possible
  • Make turns carefully and do not cut radii so small that the blade is twisted then broken
  • Round stock should not be cut unless mounted firmly in a jig
  • Do not let small pieces of wood accumulate around the blade
  • If you hear a clicking noise, turn off the machine at once. This sound indicates a crack in the blade
  • Turn off the machine as soon as you finish working
  • Sweep the table and the floor. All scrap in the scrap bin. Lower the upper guide assembly

Handhavande av maskinen

Manual

Instruktionsbok_Ejca_BA40,45,50

Material

Endast för trä! Do not cut wet or green wood. Do not cut freshly glued wood, wait at least 24h before cutting.

Some plastics and foam can be cut using this saw.

Användarinstruktioner

Se till att koppla in dammsugare innan du använder den!

Skriv något om hur man ställer de olika vinklarna

Förbrukningsmaterial

In theory we should always have an extra set of blades in case the current blade is dull. We might be able to resharpen the blades, to be confirmed.

The blades provided by the makerspace are for general purpose and designed for cross-cutting and have about XX teeth.

You can buy and install your own blade for some specific projects (cutting plastics, Flat kerf blades for joinery, etc) but you must install back the original blade when you are done.

Klingdiameter: 216 mm

Klinghåls-Ø: 30 mm

Underhåll och reservdelar

Underhåll

  • Daily
    • Check for the blade alignment, and blade guide alignment (upper and lower guides).
    • Adjust the upper blade guide assembly heigt
    • Visual check whether unit or parts are damaged
    • Check whether power cable is damaged
    • Vacuum and clean the saw.
  • Monthly
    • Check the blade sharpness. Change blade if necessary.
    • Check the lower blade garde wooden blocs and replace them is necessary.
  • TODO
    • Replace the wheel's tires (new tires are on the way)
    • Balance the wheels after installing the new tires.

Reservdelar

We do not have spare parts for this machine.

Logg

  • (2020-03-XX: replace tires and balance the wheels)
  • 2020-02-XX: 100mm vacuum connector added
  • 2018-XX-XX: Har fått motorskydd, nödstopp samt nya start och stoppknappar
  • 2018-XX-XX: Inköpt

Länkar

https://www.bosch-professional.com/se/sv/products/gcm-8-sjl-0601B19100

8 Miter Saw Pro Tips & Tricks - Steve Ramsey - Woodworking for Mere Mortals


Ägare

Maskinen inköpt av Makerspace 2018-XX-XX

Gallery

Bandsåg för trä

Gedigen gjutjärnsmaskin tillverkad på 60- till 70-talet.