Hoppa till navigering Hoppa till sök

Spånsug, Felder RL 125

38 byte lades till, 2 juli 2020 kl. 12.18
ingen redigeringssammanfattning
==Emptying the chip collector==
[[Fil:Filter cleaning handle.jpg|miniatyr]]
[[Fil:Felder 2.jpg|miniatyr]]To empty the chip colectorcollector:
*Before changing the bag, turn off the machine and pull 4-5 time of the filter cleaning handle. The Filter cleaning handle is the black handle on the side of the machine, under the power connector. See the upper picture to the right.
*Pull the large handle upwards to lower the chip collector to the floor.
*Lift out the full bag and trhow it in the garbage room.
*Take a new 200l bag from the shelf above the wood lathe.
*Do not cover the hole in the corner when replacing the bag (see . See the lower picture in to the gallery below)right.
*Roll in the collector and pull the handle down to lift it up and connect it. Make sure it is well aligned with the machine.