Skillnad mellan versioner av "Trärummet"

Från Stockholm Makerspace Wiki
Hoppa till navigering Hoppa till sök
Rad 1: Rad 1:
  
= Trärummet rules and recommendations =
+
=Trärummet rules and recommendations=
  
 
==Rules==
 
==Rules==
Rad 10: Rad 10:
  
 
==Recommenndations==
 
==Recommenndations==
 +
 
*Attend a wood workshop intro before using machinees that you are unfamiliar with.
 
*Attend a wood workshop intro before using machinees that you are unfamiliar with.
 
*Use eye protection and where applicable ear muffs when using machines.
 
*Use eye protection and where applicable ear muffs when using machines.
Rad 16: Rad 17:
  
  
 
+
=== 2020 to-do list for maintenance and upgrades ===
2020 to-do list for maintenance and upgrades
 
  
 
*Table saw
 
*Table saw

Versionen från 15 juni 2021 kl. 18.41

Trärummet rules and recommendations

Rules

  • It is forbidden to work with pressure treated wood in the room for health reasons
  • You are only allowed to work with woods and some plastics in Trärummet. Metal, stone, bricks and anything else is forbidden to work with in the room.
  • Always use some form of dust collection when working with the machines (not necessary for the drill press and not available for the lathe).
  • Always clean up as soon as you are done and before you leave. This is a general rule for the makerspace, not just this room.

Recommenndations

  • Attend a wood workshop intro before using machinees that you are unfamiliar with.
  • Use eye protection and where applicable ear muffs when using machines.
  • Keep long hair, loose clothing and any kind of straps, cords, jewelry etc. tucked away when using machines. If the catch in a spinning machine it can end really badly.
  • Do not use gloves with the machines, if they get caught it will end badly before you can react.


2020 to-do list for maintenance and upgrades

  • Table saw
    • Make zero-clearance inserts (create .dxf for the lasercutter)


  • Drill press
    • Fix it with a chain to the ceiling/bold it to the ground
    • Add a bolt to the top gear cover
    • 3D print dust collection segmented hose (or buy one in bauhaus)
  • Lathe
    • make supports for the new tools on the french cleats
    • Install some more lights?
  • Planer/jointer
    • new motor.