Skillnad mellan versioner av "Trärummet"

Från Stockholm Makerspace Wiki
Hoppa till navigering Hoppa till sök
m (Tömde sidan)
Rad 1: Rad 1:
 +
2020 to-do list for maintenance and upgrades
  
 +
* Table saw
 +
** Blade height adjustment not working. Screw and gear are worn out.
 +
** Make zero-clearance inserts (create .dxf for the lasercutter)
 +
** Adjust the table top (currently not perfectly flat)
 +
** tighten the screws of the fence, check for squareness and adjust the distance mark
 +
** General cleaning
 +
* Table router
 +
** Cut and install new top board made of phenolic coated plywood
 +
** Add height adjustment screws to the router board
 +
** Finish the router fence
 +
* Band saw
 +
** Order and install new tires on the wheels
 +
** Balancing of the wheels to reduce vibrations
 +
** Replace the small dust collector hole for a large one to connect to the HF vacuum.
 +
** Make a small dust collection system under the table (e.g. <nowiki>https://www.youtube.com/watch?v=QTLZtKWuvGs</nowiki>)
 +
* Drill press
 +
** Fix it with a chain to the ceiling/bold it to the ground
 +
** Add a bolt to the top gear cover
 +
** 3D print dust collection segmented hose (see <nowiki>https://www.thingiverse.com/thing:3283800</nowiki>)
 +
* Lathe
 +
** order/get the new retaining bolt for the chuck
 +
** make supports for the new tools on the french cleats
 +
** connect the lights/ or replace it with some LED strips on the dust collection
 +
 +
<br />

Versionen från 17 december 2019 kl. 22.38

2020 to-do list for maintenance and upgrades

  • Table saw
    • Blade height adjustment not working. Screw and gear are worn out.
    • Make zero-clearance inserts (create .dxf for the lasercutter)
    • Adjust the table top (currently not perfectly flat)
    • tighten the screws of the fence, check for squareness and adjust the distance mark
    • General cleaning
  • Table router
    • Cut and install new top board made of phenolic coated plywood
    • Add height adjustment screws to the router board
    • Finish the router fence
  • Band saw
    • Order and install new tires on the wheels
    • Balancing of the wheels to reduce vibrations
    • Replace the small dust collector hole for a large one to connect to the HF vacuum.
    • Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)
  • Drill press
    • Fix it with a chain to the ceiling/bold it to the ground
    • Add a bolt to the top gear cover
    • 3D print dust collection segmented hose (see https://www.thingiverse.com/thing:3283800)
  • Lathe
    • order/get the new retaining bolt for the chuck
    • make supports for the new tools on the french cleats
    • connect the lights/ or replace it with some LED strips on the dust collection