Skillnad mellan versioner av "Trärummet"

Från Stockholm Makerspace Wiki
Hoppa till navigering Hoppa till sök
Rad 1: Rad 1:
 
2020 to-do list for maintenance and upgrades
 
2020 to-do list for maintenance and upgrades
  
* Table saw
+
*Table saw
** Blade height adjustment not working. Screw and gear are worn out.
+
**Blade height adjustment not working. Screw and gear are worn out.
** Make zero-clearance inserts (create .dxf for the lasercutter)
+
***D-71 wormwheel  D-56 height adjustment rod
** Adjust the table top (currently not perfectly flat)
+
**Make zero-clearance inserts (create .dxf for the lasercutter)
** tighten the screws of the fence, check for squareness and adjust the distance mark
+
**Adjust the table top (currently not perfectly flat)
** General cleaning
+
**tighten the screws of the fence, check for squareness and adjust the distance mark
* Table router
+
**General cleaning
** Cut and install new top board made of phenolic coated plywood
+
 
** Add height adjustment screws to the router board
+
<br />
** Finish the router fence
+
 
* Band saw
+
*Table router
** Order and install new tires on the wheels
+
**Cut and install new top board made of phenolic coated plywood
** Balancing of the wheels to reduce vibrations
+
**Add height adjustment screws to the router board
** Replace the small dust collector hole for a large one to connect to the HF vacuum.
+
**Finish the router fence
** Make a small dust collection system under the table (e.g. <nowiki>https://www.youtube.com/watch?v=QTLZtKWuvGs</nowiki>)
+
 
* Drill press
+
<br />
** Fix it with a chain to the ceiling/bold it to the ground
+
 
** Add a bolt to the top gear cover
+
*Band saw
** 3D print dust collection segmented hose (see <nowiki>https://www.thingiverse.com/thing:3283800</nowiki>)
+
**Order and install new tires on the wheels
* Lathe
+
**Balancing of the wheels to reduce vibrations
** order/get the new retaining bolt for the chuck
+
**Replace the small dust collector hole for a large one to connect to the HF vacuum.
** make supports for the new tools on the french cleats
+
**Make a small dust collection system under the table (e.g. <nowiki>https://www.youtube.com/watch?v=QTLZtKWuvGs</nowiki>)
** connect the lights/ or replace it with some LED strips on the dust collection
+
 
 +
<br />
 +
 
 +
*Drill press
 +
**Fix it with a chain to the ceiling/bold it to the ground
 +
**Add a bolt to the top gear cover
 +
**3D print dust collection segmented hose (see <nowiki>https://www.thingiverse.com/thing:3283800</nowiki>)
 +
 
 +
<br />
 +
 
 +
*Lathe
 +
**order/get the new retaining bolt for the chuck
 +
**make supports for the new tools on the french cleats
 +
**connect the lights/ or replace it with some LED strips on the dust collection
 +
 
 +
<br />
 +
 
 +
*Planer/jointer
 +
**Replace the blades
 +
**Build a side fence
 +
**Build/buy a dust collector
  
 
<br />
 
<br />

Versionen från 17 december 2019 kl. 22.48

2020 to-do list for maintenance and upgrades

  • Table saw
    • Blade height adjustment not working. Screw and gear are worn out.
      • D-71 wormwheel D-56 height adjustment rod
    • Make zero-clearance inserts (create .dxf for the lasercutter)
    • Adjust the table top (currently not perfectly flat)
    • tighten the screws of the fence, check for squareness and adjust the distance mark
    • General cleaning


  • Table router
    • Cut and install new top board made of phenolic coated plywood
    • Add height adjustment screws to the router board
    • Finish the router fence


  • Band saw
    • Order and install new tires on the wheels
    • Balancing of the wheels to reduce vibrations
    • Replace the small dust collector hole for a large one to connect to the HF vacuum.
    • Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)


  • Drill press
    • Fix it with a chain to the ceiling/bold it to the ground
    • Add a bolt to the top gear cover
    • 3D print dust collection segmented hose (see https://www.thingiverse.com/thing:3283800)


  • Lathe
    • order/get the new retaining bolt for the chuck
    • make supports for the new tools on the french cleats
    • connect the lights/ or replace it with some LED strips on the dust collection


  • Planer/jointer
    • Replace the blades
    • Build a side fence
    • Build/buy a dust collector