Skillnad mellan versioner av "Trärummet"

Från Stockholm Makerspace Wiki
Hoppa till navigering Hoppa till sök
Rad 9: Rad 9:
 
**<s>Adjust the table top (currently not perfectly flat)</s>
 
**<s>Adjust the table top (currently not perfectly flat)</s>
 
**<s>tighten the screws of the fence, check for squareness and adjust the distance mark</s>
 
**<s>tighten the screws of the fence, check for squareness and adjust the distance mark</s>
**<s>General cleaning</s>
+
**<s>General cleaning</s><br />
 
 
<br />
 
  
 
*Table router
 
*Table router
 
**Cut and install new top board made of phenolic coated plywood
 
**Cut and install new top board made of phenolic coated plywood
 
**Add height adjustment screws to the router board
 
**Add height adjustment screws to the router board
**Finish the router fence
+
**<s>Finish the router fence</s>
 
**Fix the spindle locking pin
 
**Fix the spindle locking pin
**Check the height adjustment mechanism. Bits move down slightly when used.
+
**<s>Check the height adjustment mechanism. Bits move down slightly when used.</s><br />
 
 
<br />
 
  
 
*Band saw
 
*Band saw
**Order and install new tires on the wheels
+
**Order and install new tires on the wheels - on their way
 
**Install brushes to clean the wheels
 
**Install brushes to clean the wheels
 
**Balancing of the wheels to reduce vibrations
 
**Balancing of the wheels to reduce vibrations
**Replace the small dust collector hole for a large one to connect to the HF vacuum.
+
**<s>Replace the small dust collector hole for a large one to connect to the HF vacuum.</s>
**Make a small dust collection system under the table (e.g. <nowiki>https://www.youtube.com/watch?v=QTLZtKWuvGs</nowiki>)
+
**Make a small dust collection system under the table (e.g. <nowiki>https://www.youtube.com/watch?v=QTLZtKWuvGs</nowiki>)<br />
 
 
<br />
 
  
 
*Drill press
 
*Drill press
 
**Fix it with a chain to the ceiling/bold it to the ground
 
**Fix it with a chain to the ceiling/bold it to the ground
 
**Add a bolt to the top gear cover
 
**Add a bolt to the top gear cover
**3D print dust collection segmented hose (see <nowiki>https://www.thingiverse.com/thing:3283800</nowiki>)
+
**3D print dust collection segmented hose (see <nowiki>https://www.thingiverse.com/thing:3283800</nowiki>) (or by one in bauhaus)<br />
 
 
<br />
 
  
 
*Lathe
 
*Lathe
**order/get the new retaining bolt for the chuck
+
**Clean and grease the speed vario - 6260 bearings on their way for reassembly
 +
**order/get the new retaining bolt for the chuck (M12 - 320-330 mm)
 
**make supports for the new tools on the french cleats
 
**make supports for the new tools on the french cleats
**connect the lights/ or replace it with some LED strips on the dust collection
+
**connect the lights/ or replace it with some LED strips on the dust collection<br />
 
 
<br />
 
  
 
*Planer/jointer
 
*Planer/jointer
**<s>Replace and</s> adjust the blades + fix the broken bolt
+
**<s>Replace and</s> <s>adjust the blades</s> + fix the broken bolt (we have new bolts, to be replace next time we change the blades)
 
**Build a side fence
 
**Build a side fence
**Build/buy a dust collector
+
**<s>Build/buy a dust collector</s>
 
**built a platform above the planer storage corner to protect it from tools, etc.
 
**built a platform above the planer storage corner to protect it from tools, etc.
  
Rad 54: Rad 45:
  
 
*Miter saw station + storage
 
*Miter saw station + storage
**Building a new bench that include a box around the miter saw for dust collection and storage under and above it for scrap and temporary storage
+
**<s>Building a new bench that include a box around the miter saw for dust collection and storage under and above it for scrap and temporary storage</s>
  
 
<br />
 
<br />
  
 
*Dust collection system
 
*Dust collection system
**Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit
+
**<s>Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit</s>
***1m flexible hose to connect to the miter dust collection box
+
***<s>1m flexible hose to connect to the miter dust collection box</s>
 
**Flexible hose to connect to band saw or lathe (1.5-2m)
 
**Flexible hose to connect to band saw or lathe (1.5-2m)
**Dust collection pipe behind the drill press with double door for drill press and belt sander
+
**Dust collection pipe behind the drill press with double door for drill press and belt sander <br />
 
 
**[[Fil:Plans miter storage.jpg|miniatyr]]<br />
 

Versionen från 25 februari 2020 kl. 21.35

2020 to-do list for maintenance and upgrades

  • Table saw
    • Blade height adjustment not working. Screw and gear are worn out.
      • Order D-71 wormwheel D-56 height adjustment rod
      • Install new parts, check for loose screws and friction in the machanism
      • follow this forum for more info https://www.woodworkforums.com/f153/bought-mj2325b-2nd-hand-help-76708/2
    • Make zero-clearance inserts (create .dxf for the lasercutter)
    • Adjust the table top (currently not perfectly flat)
    • tighten the screws of the fence, check for squareness and adjust the distance mark
    • General cleaning
  • Table router
    • Cut and install new top board made of phenolic coated plywood
    • Add height adjustment screws to the router board
    • Finish the router fence
    • Fix the spindle locking pin
    • Check the height adjustment mechanism. Bits move down slightly when used.
  • Band saw
    • Order and install new tires on the wheels - on their way
    • Install brushes to clean the wheels
    • Balancing of the wheels to reduce vibrations
    • Replace the small dust collector hole for a large one to connect to the HF vacuum.
    • Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)
  • Drill press
    • Fix it with a chain to the ceiling/bold it to the ground
    • Add a bolt to the top gear cover
    • 3D print dust collection segmented hose (see https://www.thingiverse.com/thing:3283800) (or by one in bauhaus)
  • Lathe
    • Clean and grease the speed vario - 6260 bearings on their way for reassembly
    • order/get the new retaining bolt for the chuck (M12 - 320-330 mm)
    • make supports for the new tools on the french cleats
    • connect the lights/ or replace it with some LED strips on the dust collection
  • Planer/jointer
    • Replace and adjust the blades + fix the broken bolt (we have new bolts, to be replace next time we change the blades)
    • Build a side fence
    • Build/buy a dust collector
    • built a platform above the planer storage corner to protect it from tools, etc.


  • Miter saw station + storage
    • Building a new bench that include a box around the miter saw for dust collection and storage under and above it for scrap and temporary storage


  • Dust collection system
    • Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit
      • 1m flexible hose to connect to the miter dust collection box
    • Flexible hose to connect to band saw or lathe (1.5-2m)
    • Dust collection pipe behind the drill press with double door for drill press and belt sander