Skillnad mellan versioner av "Trärummet"

Från Stockholm Makerspace Wiki
Hoppa till navigering Hoppa till sök
Rad 2: Rad 2:
  
 
*Table saw
 
*Table saw
**<s>Blade height adjustment not working. Screw and gear are worn out.</s>
 
***<s>Order D-71 wormwheel  D-56 height adjustment rod</s>
 
***<s>Install new parts, check for loose screws and friction in the machanism</s>
 
***<s>follow this forum for more info https://www.woodworkforums.com/f153/bought-mj2325b-2nd-hand-help-76708/2</s>
 
 
**Make zero-clearance inserts (create .dxf for the lasercutter)
 
**Make zero-clearance inserts (create .dxf for the lasercutter)
**<s>Adjust the table top (currently not perfectly flat)</s>
 
**<s>tighten the screws of the fence, check for squareness and adjust the distance mark</s>
 
**<s>General cleaning</s><br />
 
  
*Table router
+
<br />
**Cut and install new top board made of phenolic coated plywood
 
**Add height adjustment screws to the router board
 
**<s>Finish the router fence</s>
 
**Fix the spindle locking pin
 
**<s>Check the height adjustment mechanism. Bits move down slightly when used.</s><br />
 
  
 
*Band saw
 
*Band saw
**Order and install new tires on the wheels - on their way
 
**Install brushes to clean the wheels
 
 
**Balancing of the wheels to reduce vibrations
 
**Balancing of the wheels to reduce vibrations
**<s>Replace the small dust collector hole for a large one to connect to the HF vacuum.</s>
 
 
**Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)<br />
 
**Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)<br />
  
Rad 31: Rad 16:
  
 
*Lathe
 
*Lathe
**Clean and grease the speed vario - 6260 bearings on their way for reassembly
 
**order/get the new retaining bolt for the chuck (M12 - 320-330 mm)
 
 
**make supports for the new tools on the french cleats
 
**make supports for the new tools on the french cleats
**connect the lights/ or replace it with some LED strips on the dust collection<br />
+
**Install some more lights?<br />
  
 
*Planer/jointer
 
*Planer/jointer
**<s>Replace and</s> <s>adjust the blades</s> + fix the broken bolt (we have new bolts, to be replace next time we change the blades)
+
**new motor.
**Build a side fence
 
**<s>Build/buy a dust collector</s>
 
**built a platform above the planer storage corner to protect it from tools, etc.
 
 
 
<br />
 
 
 
*Miter saw station + storage
 
**<s>Building a new bench that include a box around the miter saw for dust collection and storage under and above it for scrap and temporary storage</s>
 
 
 
<br />
 
 
 
*Dust collection system
 
**<s>Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit</s>
 
***<s>1m flexible hose to connect to the miter dust collection box</s>
 
**Flexible hose to connect to band saw or lathe (1.5-2m)
 
**Dust collection pipe behind the drill press with double door for drill press and belt sander <br />
 

Versionen från 11 januari 2021 kl. 13.22

2020 to-do list for maintenance and upgrades

  • Table saw
    • Make zero-clearance inserts (create .dxf for the lasercutter)


  • Drill press
    • Fix it with a chain to the ceiling/bold it to the ground
    • Add a bolt to the top gear cover
    • 3D print dust collection segmented hose (or buy one in bauhaus)
  • Lathe
    • make supports for the new tools on the french cleats
    • Install some more lights?
  • Planer/jointer
    • new motor.