Skillnad mellan versioner av "Trärummet"

Från Stockholm Makerspace Wiki
Hoppa till navigering Hoppa till sök
(2021 to-do list for maintenance and upgrades)
(Märken: Mobilredigering, Mobil webbredigering)
 
(17 mellanliggande versioner av 3 användare visas inte)
Rad 1: Rad 1:
2020 to-do list for maintenance and upgrades
+
 
 +
==Trärummet rules and recommendations==
 +
 
 +
===Rules===
 +
 
 +
*Keep the door close at any time. Wood dust can damage the machines in the metalrummet.
 +
*It is forbidden to work with pressure treated wood in the room for health reasons.
 +
*You are only allowed to work with woods and some plastics in Trärummet. Metal, stone, bricks and anything else is forbidden to work with in the room.
 +
*Always use some form of dust collection when working with the machines (not mandatory for the drill press and only when your are sanding a piece on the lathe).
 +
*Always clean up (benches and floor) as soon as you are done and before you leave. This is a general rule for the makerspace, not just this room.
 +
 
 +
===Recommendations===
 +
 
 +
*Attend a wood workshop intro before using machines that you are unfamiliar with.
 +
*Use eye protection and where applicable ear muffs when using machines.
 +
*Keep long hair, loose clothing and any kind of straps, cords, jewelry etc. tucked away when using machines. If the catch in a spinning machine it can end really badly.
 +
*Do not use gloves with the machines, if they get caught it will end badly before you can react.
 +
 
 +
==Discussions, asking for help==
 +
Do you need help with how something works? Did something break while you used it? Do you want to talk to others working in Trärummet?
 +
 
 +
Come join us on [[Slack]] in the channel #trärummet
 +
 
 +
==2021 to-do list for maintenance and upgrades==
  
 
*Table saw
 
*Table saw
**Blade height adjustment not working. Screw and gear are worn out.
 
***D-71 wormwheel  D-56 height adjustment rod
 
 
**Make zero-clearance inserts (create .dxf for the lasercutter)
 
**Make zero-clearance inserts (create .dxf for the lasercutter)
**Adjust the table top (currently not perfectly flat)
 
**tighten the screws of the fence, check for squareness and adjust the distance mark
 
**General cleaning
 
 
<br />
 
 
*Table router
 
**Cut and install new top board made of phenolic coated plywood
 
**Add height adjustment screws to the router board
 
**Finish the router fence
 
  
 
<br />
 
<br />
  
 
*Band saw
 
*Band saw
**Order and install new tires on the wheels
 
 
**Balancing of the wheels to reduce vibrations
 
**Balancing of the wheels to reduce vibrations
**Replace the small dust collector hole for a large one to connect to the HF vacuum.
+
**Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)<br />
**Make a small dust collection system under the table (e.g. <nowiki>https://www.youtube.com/watch?v=QTLZtKWuvGs</nowiki>)
 
 
 
<br />
 
  
 
*Drill press
 
*Drill press
 
**Fix it with a chain to the ceiling/bold it to the ground
 
**Fix it with a chain to the ceiling/bold it to the ground
 
**Add a bolt to the top gear cover
 
**Add a bolt to the top gear cover
**3D print dust collection segmented hose (see <nowiki>https://www.thingiverse.com/thing:3283800</nowiki>)
+
**3D print [https://www.thingiverse.com/thing:3283800 dust collection segmented hose] (or buy one in bauhaus)<br />
 
 
<br />
 
  
 
*Lathe
 
*Lathe
**order/get the new retaining bolt for the chuck
 
 
**make supports for the new tools on the french cleats
 
**make supports for the new tools on the french cleats
**connect the lights/ or replace it with some LED strips on the dust collection
+
**Install some more lights?<br />
  
<br />
+
*Jointer
 
+
**new motor.
*Planer/jointer
 
**Replace the blades
 
**Build a side fence
 
**Build/buy a dust collector
 
 
 
<br />
 

Nuvarande version från 16 juni 2021 kl. 08.26

Trärummet rules and recommendations

Rules

  • Keep the door close at any time. Wood dust can damage the machines in the metalrummet.
  • It is forbidden to work with pressure treated wood in the room for health reasons.
  • You are only allowed to work with woods and some plastics in Trärummet. Metal, stone, bricks and anything else is forbidden to work with in the room.
  • Always use some form of dust collection when working with the machines (not mandatory for the drill press and only when your are sanding a piece on the lathe).
  • Always clean up (benches and floor) as soon as you are done and before you leave. This is a general rule for the makerspace, not just this room.

Recommendations

  • Attend a wood workshop intro before using machines that you are unfamiliar with.
  • Use eye protection and where applicable ear muffs when using machines.
  • Keep long hair, loose clothing and any kind of straps, cords, jewelry etc. tucked away when using machines. If the catch in a spinning machine it can end really badly.
  • Do not use gloves with the machines, if they get caught it will end badly before you can react.

Discussions, asking for help

Do you need help with how something works? Did something break while you used it? Do you want to talk to others working in Trärummet?

Come join us on Slack in the channel #trärummet

2021 to-do list for maintenance and upgrades

  • Table saw
    • Make zero-clearance inserts (create .dxf for the lasercutter)


  • Drill press
    • Fix it with a chain to the ceiling/bold it to the ground
    • Add a bolt to the top gear cover
    • 3D print dust collection segmented hose (or buy one in bauhaus)
  • Lathe
    • make supports for the new tools on the french cleats
    • Install some more lights?
  • Jointer
    • new motor.