Wall of shame

Från Stockholm Makerspace Wiki
Version från den 29 februari 2020 kl. 16.49 av Cloraux (diskussion | bidrag) (What Are You Waiting For?)
Hoppa till navigering Hoppa till sök

This page exhibit some mistakes and inappropriate behavior that happened in the woodshop. The goal is not to point the finger at anybody but to raise awareness. Making an mistakes is ok as long as you realize it and learn from it. Safety rules and proper handling of the machines as described in this wiki are there to protect you and the tools so that everyone can enjoy the space.

Remember that if you have any question or need help on a project, you'll always find someone.

Now let's take a walk along the wall of shame with our member Kevin (purely randomly chosen name). Kevin might have different profils. He can be a new excited member that didn't take the time to read the wiki, he can be an relatively advanced user that believes he knows everything (but actually doesn't), he can also be an long-term makerspace member that believes rules do not apply to him anymore. Kevin also has little time to spend on his project, thus neglect the time he should invest in cleaning after himself.

Another One Bits The Dust

Today, Kevin spent a lot of time sanding a lot of wood. It took him all day and a lot of sanding discs. But he now has a nice a smooth piece of wood. Unfortunately Kevin didn't spend his last 2 minutes cleaning and putting back the orbital sander in his box.

Don't be like Kevin and spend 2 minutes vacuuming the tool. It's also worth opening the filter box to empty it.

Also Kevin uses 115mm discs on this 125mm pad and press down like crazy. It just destroys the sides of the pads and discs won't stick.

Don't be like Kevin, vacuum the dust!

The Thin Red Line

Today, Kevin used the jointer/planer - the machine that creates the most wood chips - and quickly filled up the vacuum bag. And Kevin didn't check the level in the bag even though there's a transparent window with a thin red line and the text "MAX". As a result it filled up the space between the bag and the filter (about 25 cm) and it took two members about 1 hour to clean.

Also Kevin planed some wet would. Humidity can clog up the filter.

Don't be like Kevin, check the thin red line!

We Will Rock You

Today, Kevin had some lightweight limestone bricks to cut. Instead of using an appropriate cutting disc on an angle grinder, he thought it would be easier to use the table saw. Kevin should have asked first. As a result, Kevin quickly wore the blade and literately covered the table saw gears and the room with a fine abrasive white dust.

Don't be like Kevin, don't bring any kind of stone in the woodshop!

What Are You Waiting For?

Yes Kevin, here is your punishment for not emptying the trash, a song title by Nickelback!

I know taking the trash out when you just put a few pieces of wood is not fair but that's how it works. But leaving it like this for the next member is also not fair.

Don't be like Kevin, empty the trash when it's full!

Dust in the wind

Today, Kevin heavily used the belt sander. If only he would have spend 1 minute of his time cleaning his mess.

Also if you connect the vacuum, you have much less to clean afterwards and you don't fill the room with dust!

Don't be like Kevin, connect the vacuum to the belt sander!

Every Breath You Take

Will slowly kill you. Today Kevin found an old telephone post. That would be awesome if only this stuff was not stuffed with dirty chemicals. The smell in the woodshop after one day should have give you a hint.

Instead you cut some pieces and spread deadly dust all around. Hopefully someone threw it away and Kevin acknowledge his honest mistake.

Don't be like Kevin, don't bring carcinogenic wood!