How to use

The following steps assumes you have prepared your Gcode from your favorite CAM software.

As an alternative, you can also use Makera CAM software. The steps are described here <<TODO>>

Prepare your GCode

- Please refer this page for adding Carvera profile and post processor in Fusion 360, VCarve Desktop

https://github.com/MakeraInc/CarveraProfiles

Install Controller software

The Controller software for Carvera Air will most likely be installed on a common computer or a tablet that is attached to the device. Until then or If you prefer to have it installed on your own computer, you can do so from https://github.com/MakeraInc/CarveraController

Upload your GCode to Carvera Air

- Launch Carvera Controller software

- If you are running for first time, you will need to search the machine name in WiFi. When you search, you will find it with the name Makerspace_CarveraAir

In this video, we are guided through uploading a GCode file to Carvera Air Desktop CNC by Makera! After designing a part and preparing it in CAM software, you will need to upload the exported GCode file to the Carvera Air to begin manufacturing. This is done through the Carvera Controller app, as all files are stored on the Carvera Air's internal memory as shown in this tutorial.

Attaching Z-Probe

<< TODO >>

Changing bit / endmill

<< TODO >>

Holding your Stock

<< TODO >>

Cleaning

<< TODO >>

https://wiki.makera.com/en/Air/How-Tos

Choosing Bits

In this video, we look at the different types of bits, also known as cutting tools, that you might consider for your CNC Project. Bits are what perform the cutting operations when manufacturing our projects, and choosing the correct bit to perform the type of cut we want on the material we are using is key. This video overviews the commonly used milling bits that are provided with the Carvera and Carvera Air, as well as some specialty bits for more complex projects too!

Choosing Stock

Stock is the term used to describe the material we used to manufacture our CNC projects. Versatile desktop CNC machines like the Carvera and Carvera Air can work with a wide range of materials, including woods, acrylic, composites, metals, and even printed circuit boards! As you choose the right stock for your project, there are some key considerations like choosing the right bits and speeds and feeds as well as needs for external cooling that will contribute towards the success of your project. This video also discusses the good practice for performing test cuts as we start a new project

How to change the tool

In this video, we are guided through using the Quick Tool Change System on the Carvera Air Desktop CNC by Makera! The Air is equipped with a unique tool change system which allows for users to connect an easily swap the bit (also known as a cutting tool) on their CNC

Manual - How to change Spindle Collet

In this video, we are guided through changing the Spindle Collect on the Carvera Air Desktop CNC by Makera! Spindle Collet is the part of a CNC Spindle which that holds the bit. By changing the collet, you can change the diameter bit used for your CNC projects with the Carvera Air!

Speeds & Feeds

Refer this page

Ägandeförhållande

Denna maskin ägs av Stockholm Makerspace.