166
redigeringar
Spånsug, Felder RL 125: Skillnad mellan sidversioner
→Reservdelar
Cloraux (diskussion | bidrag) |
Cloraux (diskussion | bidrag) |
||
| Rad 6: | Rad 6: | ||
The vacuum should be used at anytime with the following machines: | The vacuum should be used at anytime with the following machines: | ||
* Table saw, table router and planer with the flexible hose. Use as well to clean around the miter saw and the lathe. | |||
* Band saw (one dedicated flexible hose) | |||
* Miter saw (two dedicated pipes) | |||
In a near futur, the belt sander and drill press will have a dedicated hose too. | In a near futur, the belt sander and drill press will have a dedicated hose too. | ||
| Rad 20: | Rad 18: | ||
Not much risks of injuring yourself, but a few things to keep in mind to keep the machine running safely: | Not much risks of injuring yourself, but a few things to keep in mind to keep the machine running safely: | ||
* Do not cut or sand any wet wood as you could clog the filter (which is an expensive spare part) | |||
* Check the level of dust in the bag and change the bag when reaching the maximum level. | |||
* On the side of the machine, there is a handle that you can pull a few times to clean the filter, do not perform this when the machine is running. | |||
* Do not obstruct the air output. | |||
==Handhavande av maskinen== | ==Handhavande av maskinen== | ||
| Rad 44: | Rad 39: | ||
==Reservdelar== | ==Reservdelar== | ||
''Har vi reservdelar på plats?'' | ''Har vi reservdelar på plats?'' | ||
== Maintenance == | |||
=== Daily === | |||
* Visual check whether unit or parts are damaged | |||
* Check whether power cable is damaged | |||
* Check whether dust bags are inserted and check if not full | |||
=== Weekly === | |||
* Machine powered off, pull the filter cleaning handle 4-5 times. This has to be done before every bag replacement. | |||
=== Monthly === | |||
* Visual check for leaks around the filter (dust ejected from the unit cover) | |||
* Check whether the minimum exhaust volume control is functioning correctly | |||
=== Annually === | |||
* Visual check whether dust has collected in fan housing, remove if necessary | |||
* Check whether the seal between dust collector and unit is broken, replace if needed | |||
# | # | ||