Wall of shame: Skillnad mellan sidversioner

Wall of shame (visa wikitext)

9 byte lades till , 1 mars 2020

1 258

redigeringar

@@ Rad 62: / Rad 62: @@
 Not satisfied with the result, it did cut terribly slow, he pushed harder and harder to get through the aluminium piece, managed to get trough and left it at that.
-Running the chop saw with the blade backwards, and/or pushing it down with excessive force, will result in damage to the saw.
+Running the chop saw with the blade backwards, and/or pushing it down with excessive force, results in damage to the saw blades.
-These blades are quite expensive (~1500SEK each), and last a long time if you use the right blade, mount them the right way around and do not feed with excessive force.
+These blades are very expensive (~1500SEK each), and last a really long time if you use the right blade, mount them the right way around and do not feed with excessive force.
 [[Fil:Backwards sawblade.jpg|ingen|miniatyr|Running the metal chop saw with a blade mounted backwards or not fastened properly is a surefire way of removing teeth from a expensive blade.]]