106
redigeringar
Spånsug, Felder RL 125: Skillnad mellan sidversioner
ingen redigeringssammanfattning
Cloraux (diskussion | bidrag) |
Ingen redigeringssammanfattning |
||
| Rad 29: | Rad 29: | ||
==Emptying the chip collector== | ==Emptying the chip collector== | ||
[[Fil:Filter cleaning handle.jpg|miniatyr]] | [[Fil:Filter cleaning handle.jpg|miniatyr]] | ||
To empty the chip | [[Fil:Felder 2.jpg|miniatyr]] | ||
To empty the chip collector: | |||
*Before changing the bag, turn off the machine and pull 4-5 time of the filter cleaning handle. The Filter cleaning handle is the black handle on the side of the machine, under the power connector. See the picture to the right. | *Before changing the bag, turn off the machine and pull 4-5 time of the filter cleaning handle. The Filter cleaning handle is the black handle on the side of the machine, under the power connector. See the upper picture to the right. | ||
*Pull the large handle upwards to lower the chip collector to the floor. | *Pull the large handle upwards to lower the chip collector to the floor. | ||
*Lift out the full bag and trhow it in the garbage room. | *Lift out the full bag and trhow it in the garbage room. | ||
*Take a new 200l bag from the shelf above the wood lathe. | *Take a new 200l bag from the shelf above the wood lathe. | ||
*Do not cover the hole in the corner when replacing the bag | *Do not cover the hole in the corner when replacing the bag. See the lower picture to the right. | ||
*Roll in the collector and pull the handle down to lift it up and connect it. Make sure it is well aligned with the machine. | *Roll in the collector and pull the handle down to lift it up and connect it. Make sure it is well aligned with the machine. | ||