Table saw video script: Skillnad mellan sidversioner

Table saw video script (visa wikitext)

1 379 byte lades till , 2 november

ingen redigeringssammanfattning

106

redigeringar

@@ Rad 61: / Rad 61: @@
 Thank you for watching.
+== Questions ==
+# Before using the saw, which are the most important to do:
+## Raise the blade, turn on the chip evacuator, tie up any long hair and any lose clothing
+## Remove any sawdust on the work area, raise the blade, turn on the chip evacuator
+## Check that the blade is sharp, turn on the chip evacuator, tie up any long hair and any lose clothing
+# When cutting wide pieces length-wise, which should you do?
+## Hold one hand on each side of the blade for stability.
+## Use the cross-cut fence
+## Stand the side of the blade where the widest part of the piece will be when the cut is finished.
+# When using the sliding table, what should you preferably do?
+## Stand with your feet wide apart for stability and push the sliding table forward
+## Stand with your hips against the sliding table and walk forward to push it forward
+# When you want to cut off many small pieces of the same length from a single long piece, what should you preferrably dodo?
+## Use the mitre saw
+## Use the cross fence on the sliding table and the conventional fence pulled back so it does not cover the blade
+## Use the conventional fence and hold the piece by hand
+# If you realize that your cut is not working out the way you wanted, what should you preferably do if you can?
+## Abort the cut by pulling the piece you are cutting back.
+## Turn off the machine off
+## Finish the cut anyways