Bordssåg, Hammer K3 Winner: Skillnad mellan sidversioner

Bordssåg, Hammer K3 Winner (visa wikitext)

480 byte lades till , Söndag kl. 15.13

m

2

redigeringar

@@ Rad 121: / Rad 121: @@
 -01-05:
-Table saw cleaned throughly, was full of saw dust as the vacuum cleaner was disconnected.
+Table saw cleaned throughly, was full of saw dust as the hose and adapter were disconnected. Adapter was broken and a new one is being printed.
-Cleaned and lubricated the height spindle. Still some problems remains in the topmost position.
+Cleaned and lubricated the height spindle. It still feels like it's hard to adjust upward, but not affecting the performance or operation of the machine.
-Cleaned and lubricated tilting spindle.
+Cleaned and lubricated tilting spindle. There is a clicking sound at around 40 degrees. Unclear what.
 Checked the drive and scoring belt. Found OK
-Aligned the blade to 90degrees.
+The blade is aligned to 90+/-0.1 degrees. Parallel fence is, as far as we could tell, parallel to the blade. The cross cut fence is, as far as we can tell, 90 degrees to the blade. Slight wobble on the crosscut fence so you have to be careful.
@@ Rad 141: / Rad 141: @@
 [https://www.felder-group.com/WEB/shop/00_Dokumente/503-10103/503010-902_02_1709_HA_BA_K3_basic_winner_ENG_Lo.pdf Manual]
+[https://www.youtube.com/watch?v=raMZ_fhUklg YT video on how to calibrate the Hammer K3]
 [[Kategori:Trärummet]]
 [[Kategori:Trä]]
 [[Kategori:Obligatorisk Introkurs]]