Cutting Machine Silhouette Curio 2: Skillnad mellan sidversioner

|'''Important:''' The electrostatic cutting table '''must always be used with the protective plastic sheet on top'''. Failing to do this will cause permanent damage to the electrostatic grabbing surface.  

|}

Power on the machine by pressing and holding the power button on the right side.

# Make sure the electrostatic cutting table (painted metal surface, without raised edges) is mounted in the cutter

# Press the touch button that activates the electrostatic hold [needs icon/image].

# Place the material you want to cut on the table.

# The material must be completely flat in order to adhere well electrostatically.

# If the material does not adhere well, switch to the “debris” plate (made entirely of plastic with raised edges) and tape a Cameo mat onto it.

# To change tools: pull forward on tool holder's protruding tab, lift the tool upward. Iinsert the new tool using the same procedure in reverse.

# The completely white cutting tool is “auto depth” one, suitable for cutting when you are unsure of the exact settings.

# Start ''Silhouette Studio'' on the computer next to the cutting machines.

# Select Curio 2 in the top right white box. It should say "ready" in green letters, if not, check that it's

# If using the Cameo grid mat for precise placement, select ''Cameo Mat'' from the options on the right side of the window, and adjust the transparency slider so you can see lines and numbers.

# Click the '''SEND''' tab.

# Select the tool(s) you inserted and the material you are using.