135
redigeringar
Cutting Machine Silhouette Curio 2: Skillnad mellan sidversioner
Cutting Machine Silhouette Curio 2 (visa wikitext)
Versionen från 27 december 2025 kl. 11.57
, 27 december 2025→Material set-up
Arru (diskussion | bidrag) (→Acrylic cutting: jig details) |
Arru (diskussion | bidrag) |
||
| Rad 199: | Rad 199: | ||
## Choose special tools, heat pen fill, and enable the fill style of your choice | ## Choose special tools, heat pen fill, and enable the fill style of your choice | ||
## For a 100% fill, use hatch (lines) fill style with setting from the table | ## For a 100% fill, use hatch (lines) fill style with setting from the table | ||
=== | === Mounting foil === | ||
# wipe the acrylic surface with isopropyl alcohol so that it is squeaky clean | # wipe the acrylic surface with isopropyl alcohol so that it is squeaky clean | ||
| Rad 207: | Rad 207: | ||
# apply masking tape at the edges, gently pulling to get the foil flat agains the surface | # apply masking tape at the edges, gently pulling to get the foil flat agains the surface | ||
=== Foil | === Foil transfer === | ||
# Double check that the pen has finished heating up (thermometer on button is all red, not animating) | # Double check that the pen has finished heating up (thermometer on button is all red, not animating) | ||