Maintenance & repairs log — Betongsuggan

Dated reports, repairs and photographs for Metal CNC Mill "Betongsuggan". Use the main machine guide for current access and operating information.

Commissioning history

The Betongsuggan Commissioning Project 2025 and 2026 records the rebuild, electrical work, cooling, lubrication, enclosure and remaining commissioning checks. Keep those project records together there.

14 October 2026 — current photographs

The member supplied new views with the enclosure open and closed. The main guide now uses these side by side. They show the small table vise, spindle nozzles, front-left control panel and emergency stop, blue MQL housing at the front right, and separate lower lubrication unit. This entry records the photographed arrangement; no repair or commissioning test was reported.

Earlier guide photographs

These images were replaced on the main guide on 14 October 2026. Their capture dates are not recorded; retain them as earlier setup references.

Betongsuggan, the metal CNC mill, seen from the front: the enclosure with its clear doors, the spindle with its lubrication nozzles, a vise on the table, the control panel with the emergency stop at the front left, and the lubrication pump and a blue housing in the frame below.

Betongsuggan, the metal CNC mill, seen from the front: the enclosure with its clear doors, the spindle with its lubrication nozzles, a vise on the table, the control panel with the emergency stop at the front left, and the lubrication pump and a blue housing in the frame below.


Betongsuggan from the right: the white side panel with the Metal CNC sign, the control panel at the front left, and the keyboard on the bench to the right.

Betongsuggan from the right: the white side panel with the Metal CNC sign, the control panel at the front left, and the keyboard on the bench to the right.