Cutting Machine Silhouette Curio 2: Skillnad mellan sidversioner

Cutting Machine Silhouette Curio 2 (visa wikitext)

9 togs bort , 18 november

115

redigeringar

@@ Rad 84: / Rad 84: @@
 === Preparing the cutting Table ===
-# Make sure the electrostatic cutting table (painted metal surface, without raised edges) is mounted in the cutter
+# Make sure the debris tray (all plastic, raised edges) is mounted in the machine
-# To change it, pull the table straight out towards you. About halfway out, it can be lifted free.
+# To change it, flip the release levers on both sides, pull the table straight out towards you. About halfway out, it can be lifted free.
-# Place the transparent protective plastic sheet over the cutting table, edge to edge. Use a soft scraper, if needed to flatten it.
+# Insert the debris tray the same way, flip levers to lock it into the machine
-# Press the touch button that activates the electrostatic hold [needs icon/image].
+# If you need a Cameo mat, place it within the matching raised markings on the tray, use sticky tape to hold it in place
 === Preparing the material ===