Trärummet: Skillnad mellan sidversioner

Versionen från 17 december 2019 kl. 22.38

2020 to-do list for maintenance and upgrades

Table saw
- Blade height adjustment not working. Screw and gear are worn out.
- Make zero-clearance inserts (create .dxf for the lasercutter)
- Adjust the table top (currently not perfectly flat)
- tighten the screws of the fence, check for squareness and adjust the distance mark
- General cleaning
Table router
- Cut and install new top board made of phenolic coated plywood
- Add height adjustment screws to the router board
- Finish the router fence
Band saw
- Order and install new tires on the wheels
- Balancing of the wheels to reduce vibrations
- Replace the small dust collector hole for a large one to connect to the HF vacuum.
- Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)
Drill press
- Fix it with a chain to the ceiling/bold it to the ground
- Add a bolt to the top gear cover
- 3D print dust collection segmented hose (see https://www.thingiverse.com/thing:3283800)
Lathe
- order/get the new retaining bolt for the chuck
- make supports for the new tools on the french cleats
- connect the lights/ or replace it with some LED strips on the dust collection

@@ Rad 1: / Rad 1: @@
+to-do list for maintenance and upgrades
+* Table saw
+** Blade height adjustment not working. Screw and gear are worn out.
+** Make zero-clearance inserts (create .dxf for the lasercutter)
+** Adjust the table top (currently not perfectly flat)
+** tighten the screws of the fence, check for squareness and adjust the distance mark
+** General cleaning
+* Table router
+** Cut and install new top board made of phenolic coated plywood
+** Add height adjustment screws to the router board
+** Finish the router fence
+* Band saw
+** Order and install new tires on the wheels
+** Balancing of the wheels to reduce vibrations
+** Replace the small dust collector hole for a large one to connect to the HF vacuum.
+** Make a small dust collection system under the table (e.g. <nowiki>https://www.youtube.com/watch?v=QTLZtKWuvGs</nowiki>)
+* Drill press
+** Fix it with a chain to the ceiling/bold it to the ground
+** Add a bolt to the top gear cover
+** 3D print dust collection segmented hose (see <nowiki>https://www.thingiverse.com/thing:3283800</nowiki>)
+* Lathe
+** order/get the new retaining bolt for the chuck
+** make supports for the new tools on the french cleats
+** connect the lights/ or replace it with some LED strips on the dust collection
+<br />