Trärummet: Skillnad mellan sidversioner

Versionen från 3 januari 2020 kl. 10.07

2020 to-do list for maintenance and upgrades

Table router
- Cut and install new top board made of phenolic coated plywood
- Add height adjustment screws to the router board
- Finish the router fence

Band saw
- Order and install new tires on the wheels
- Balancing of the wheels to reduce vibrations
- Replace the small dust collector hole for a large one to connect to the HF vacuum.
- Make a small dust collection system under the table (e.g. https://www.youtube.com/watch?v=QTLZtKWuvGs)

Drill press
- Fix it with a chain to the ceiling/bold it to the ground
- Add a bolt to the top gear cover
- 3D print dust collection segmented hose (see https://www.thingiverse.com/thing:3283800)

Lathe
- order/get the new retaining bolt for the chuck
- make supports for the new tools on the french cleats
- connect the lights/ or replace it with some LED strips on the dust collection

Planer/jointer
- Replace the blades
- Build a side fence
- Build/buy a dust collector
- built a platform above the planer storage corner to protect it from tools, etc.

Miter saw station + storage
- Building a new bench that include a box around the miter saw for dust collection and storage under and above it for scrap and temporary storage

Dust collection system
- Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit
  - 1m flexible hose to connect to the miter dust collection box
- Flexible hose to connect to band saw or lathe (1.5-2m)
- Dust collection pipe behind the drill press with double door for drill press and belt sander

@@ Rad 3: / Rad 3: @@
 *Table saw
 **Blade height adjustment not working. Screw and gear are worn out.
-***D-71 wormwheel  D-56 height adjustment rod
+***<s>Order D-71 wormwheel  D-56 height adjustment rod</s>
+***Install new parts, check for loose screws and friction in the machanism
+***follow this forum for more info <nowiki>https://www.woodworkforums.com/f153/bought-mj2325b-2nd-hand-help-76708/2</nowiki>
 **Make zero-clearance inserts (create .dxf for the lasercutter)
 **Adjust the table top (currently not perfectly flat)
@@ Rad 44: / Rad 46: @@
 **Build a side fence
 **Build/buy a dust collector
 **built a platform above the planer storage corner to protect it from tools, etc.
 <br />
@@ Rad 53: / Rad 55: @@
 <br />
-* Dust collection system
+*Dust collection system
-** Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit
+**Double door at the exit of the vacuum to open the flow to the miter saw or the rest of the circuit
-*** 1m flexible hose to connect to the miter dust collection box
+***1m flexible hose to connect to the miter dust collection box
-** Flexible hose to connect to band saw or lathe (1.5-2m)
+**Flexible hose to connect to band saw or lathe (1.5-2m)
-** Dust collection pipe behind the drill press with double door for drill press and belt sander
+**Dust collection pipe behind the drill press with double door for drill press and belt sander
 **[[Fil:Plans miter storage.jpg|miniatyr]]<br />